1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Trike XL motor set (motor+esc+prop)
1 x CF tube set (Ø 38 mm y Ø 14 mm)
1 x Carbon fiber rod 16 mm x 1000 mm
1 x Cable silicona macho batt. receptor 30 cm (Futaba)
1 x Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x Pilot JAN 1/4 Saiplanes
1 x Straightened rod Ø 0.5 mm x 1000 mm
1 x Z type of cable coupler Ø 1 (2 uds)
1 x Oracover CARBON Metalic 1 m
1 x White silicone 0,25 qmm wire (100 m)
1 x Carbon fiber rod 10 mm x 1000 mm
1 x Silent-blocks DLE 170M
1 x Motor DLE 200cc Std
1 x Motor DLE 430 cc - Paramotors
1 x Fuselage BULL MØ1 2.600mm
1 x Landing gear Rocket 400
1 x Spare Part Frame Set for EACHINE RACER 250
1 x Wing Joiner BULL MØ1 2.600mm
1 x BOEING 727, Retract set for Boeing 727
1 x Set transmisions BULL Mo1 (dura/aluminium)
1 x Aluminium wide washer M3 gold (4 pcs)
1 x Lock washer 2.7 mm (20 pcs)
1 x M3-M4 rubber washer (8 pcs)
1 x Spring lock washer 4.1 mm (20 pcs)
1 x Flat washer 1.7 mm (20 pcs)
1 x Circlik for shaft 1.5 mm (10 pcs)
1 x Aluminium cap bolt washer M4 blue (8 pcs)
1 x Lock washer 2.2 mm (20 pcs)
1 x DYNAMOMETER S-1580
1 x Lock washer 4.3 mm (20 pcs)
1 x Spring lock washer 2.1 mm (20 pcs)
1 x Circlik for shaft 2.3 mm (10 pcs)
1 x Aluminium cap bolt washer M3 blue (8 pcs)
1 x Aluminium cap bolt washer M3 red (8 pcs)
1 x Aluminium cap bolt washer M3 black (8 pcs)
1 x Propeller APC 11x7 SF
1 x Propeller APC 11x10 Electric
1 x Escape DLE-60 Izda
1 x DLE 55 Muffler
1 x Cessna SKYLANE T182 1.75m - Seagull Model
1 x DLE Ignition 111/120/170
1 x Epoxy 40 min. 4kg (Hardener)
1 x Shaft sleeve LAMA
1 x ABS Strip 1.0x4.0x1000 mm
1 x ABS angle 5,0x5,0x1000 mm
1 x ABS angle 4,0x4,0x1000 mm
1 x ABS tube 14.0x10.0x1000 mm
1 x ABS "T" angle 4.0x4.0x1000 mm
1 x 290x4 mm M4 shaft ship
1 x ABS angle 1.5x1.5x1000 mm
1 x Aluminium wide washer M3 red (4 pcs)
1 x Spring lock washer 2.6 mm (20 pcs)
1 x Circlik for shaft 1.9 mm (10 pcs)
1 x Quicklock washer 4 mm (10 pcs)
1 x Aluminium wide washer M3 blue (4 pcs)
1 x Quicklock washer 3 mm (10 pcs)
1 x Aluminium cap bolt washer M4 green (8 pcs)
1 x Flat washer 4.3 mm (20 pcs)
1 x Flat washer 2.2 mm (20 pcs)
1 x Quicklock washer 1.5 mm (10 pcs)
1 x Flat washer 3.2 mm (20 pcs)
1 x M3 black washers (4 pcs)
1 x Quicklock washer 2.5 mm (10 pcs)
1 x Aluminium cap bolt washer M3 green (8 pcs)
1 x Aluminium wide washer M4 Black (4 pcs)
1 x Spring lock washer 3.1 mm (20 pcs)
1 x Optical RPM Sensor
1 x Quicklock washer 3.5 mm (10 pcs)
1 x Circlik for shaft 1.2 mm (10 pcs)
1 x Propeller APC 11x6 Glow/Gas
1 x Propeller APC 11x3.8 SF
1 x Propeller APC 10x6 Glow/Gas
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x Propeller APC 10x6 Electric Pusher
1 x EXTRA 330SC-E 95" Orange/Blue/White
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x Propeller APC 10x4.7 SF Pusher
1 x Propeller APC 12x4.5 MR
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x Buy Perforated film 100 cm / 50 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x Carbon fiber rod 3.0 mm x 1000 mm
1 x Canister combo DLE 120 cc
1 x DOMINO 46-55 Trainer 1583 mm
1 x DLE 55 RA pipe plug
1 x Small Crow DLE-170M
1 x Gasket set DLE-20
1 x Gasket set DLE-55RA
1 x Loctite HYSOL 9462
1 x Epoxy 40 min (Hardener). 10Kg
1 x Epoxy 30 min. 200g
1 x Swashplate metal LAMA
1 x Flybar support metal LAMA
1 x T-shape holder metal LAMA
1 x Blade holder metal LAMA
1 x 261 mm M4/M4 6.0x4.0 mm shaft ship
1 x ABS Strip 1.5x4.0x1000 mm
1 x 290 mm 290 mm M5x18 mm shaft ship
1 x ABS angle 6,0x6,0x1000 mm
1 x ABS tube 16.0x14.0x1000 mm
1 x 290 mm M4/M4 6.0x4.0 mm shaft ship
1 x 290 mm M4 7/8x212 mm shaft ship
1 x 270 mm 3/3 mm shaft ship
1 x ABS Strip 1.5x8.0x1000 mm
1 x ABS Strip 1.5x6.0x1000 mm
1 x ABS I Strip 10x5x1000 mm
1 x ABS "T" angle 6.0x6.0x1000 mm
1 x ABS tube 20.0x18.0x1000 mm
1 x ABS angle 3,0x3,0x1000 mm
1 x U Profile ABS 1,0x2,0x1000 mm
1 x ABS rectangular profile 10x5.0x1000 mm
1 x ABS I Strip 20x10x1000 mm
1 x ABS "T" angle 8.0x8.0x1000 mm
1 x ABS Strip 1.0x2.0x1000 mm
1 x ABS rectangular profile 12x6.0x1000 mm
1 x 290 mm M5 Prop shaft
1 x ABS angle 10,0x10,0x1000 mm
1 x ABS "T" angle 10.0x10.0x1000 mm
1 x ABS tube 10.0x8.0x1000 mm
1 x ABS Strip 1.5x3.0x1000 mm
1 x Soporte grifo FESTO (2 pcs)
1 x ABS "T" angle 2.0x2.0x1000 mm
1 x Cilinder DLE 30 - DLE 60
1 x Electric Landing Gear ULTIMATUM 3.0 (Elektron Re
1 x Tank BULL MØ1 3L+14L Smoke (CMJets)
1 x ASPIRE Red ARF 2.000 mm, Canopy
1 x HAWKER HUNTER 1:5,8 Desert (1.770mm)
1 x Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re
1 x Tank BULL MØ1 4L (CMJets)
1 x Canopy BULL MØ1 2.600mm
1 x HAWKER HUNTER 1:5,8 (1.770mm)
1 x Brake controller for 28 and 36 mm Brakes
23,455.37EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies