Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

PT-22 Ryan Recruit 2290 mm (SEAGULL)
560.00EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

1 x	Gancho de lanzamiento fijo
2 x	Gancho de remolque hasta 4,5 m
1 x	Gancho de lanzamiento regulable
1 x	Gancho de remolcador
1 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x	Acople ALU M2,5 Ø 3 (2 uds)
1 x	Ball link V1 Ø7 M4/3 (6 uds)
2 x	Acoplador M2 (10 uds)
1 x	Acople ALU M2,5 Ø 6 (2 uds)
2 x	Acoplador M2,5 Ø 2 mm (10 pcs)
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
2 x	Camara USB micro endoscopica
1 x	Acoplador Micro M2 Ø 0,8 mm (10 pcs)
1 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
2 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x	Ball link ALU M3/2 con rodamiento (1 pcs)
1 x	Acoplador M2,5 Ø 3 mm (10 pcs)
1 x	Cámara Sony 4140+673 CCD Board con emisor 5,8 GHz 200mw + antena
1 x	Acople ALU M2 Ø 4 (2 uds)
1 x	Acoplador Micro M2 Ø 1 mm (10 pcs)
1 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Ball link ALU M2,5/2 con rodamiento (1 pcs)
1 x	Crimping sleeves para cables de 1.1 mm (10 pcs)
1 x	Ball link Aluminio M3 (2 pcs)
1 x	Ball link aluminio M3 V1 (10 pcs)
1 x	Ball link M2 (10 pcs)
1 x	Ball link aluminio M3 V1 rojo (10 pcs)
1 x	Ball link latón BS M3 V1 (10 pcs)
1 x	Acoplador M3 (10 uds)
3 x	Camara 800 TVL CMOS para FPV
1 x	Acople ALU M3 Ø 4 (2 uds)
2 x	Pegatinas números para marcar
1 x	Catapulta Vasa model
1 x	Bungee HLG Premium
1 x	Polo Hispano Aviación
1 x	AIREX® M060 lámina (amarilla) 1200x550x1,2 mm (5 pcs)
1 x	Conector DEANS (T)
1 x	Gancho de remolque hasta 3m
1 x	Varilla carbono 16 mm x 1000 mm
1 x	Varilla carbono 0.8 mmx1000 mm
1 x	Cinta autoadhesiva 10 mm x 12m; Diente 0.5 mm
2 x	Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm
2 x	Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm
2 x	Pin 2,5 terminales riostras M2,5 ⌀ (6 pcs)
2 x	Kwik link metálico M2 (10 uds)
1 x	Acople ALU M2,5 Ø 4 (2 uds)
1 x	DUPLEX 2.4EX Central Box 210
1 x	Plancha carbono 350x150x1.0 mm
2 x	Listón de CAOBA 3,0x3,0x1000 mm
1 x	Listón de PINO 10x10x1000 mm
1 x	Liston de BALSA 10 x 10 x 1000 mm
2 x	Listón de PINO 5,0x5,0x1000 mm
1 x	Listón de BALSA 4,0x4,0x1000 mm
2 x	Listón de PINO 6,0x6,0x1000 mm
2 x	Liston HAYA 3 x 10 x 1000 mm
2 x	Liston HAYA 10 x 10 x 1000 mm
1 x	Ferrita 14x8x5.5 mm
1 x	Ferrita 17x10x6.5 mm
1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Kwik link AL M4 con Clip (2 pcs)
1 x	Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6
1 x	Polea de bronce 16/2 (2 pcs)
1 x	Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm
1 x	Cono Aluminio hélice fija 45 mm diámetro / eje 5,0 mm
1 x	Cono INO de 70 mm (Imitacion carbono)
1 x	Kwik link micro 0.8mm (10 uds)
1 x	Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	linea kevlar Ø 0,5 mm para pull pull (3 m)
1 x	Kwik link micro (10 uds)
1 x	Kwik link y brazo de nylon M4xM2,5xL30
1 x	Pin Ø 2,5 mm para Kwik link MPJ2170/2173 (6 pcs)
2 x	Kwik link metálico M2,5 (10 uds)
1 x	Kwik link negro largo (10 pcs)
1 x	Pin Ø 1,6 mm para Kwik link MPJ2150/2157 (6 pcs)
2 x	Kwik link con brazo M3xM2xL24
1 x	Pin 1,6 para terminales riostras M1,6 ⌀ (6 pcs)
1 x	Kwik link metálico con bola M3 (10 uds)
1 x	Kwik link con brazo M5xM2,5xL30
1 x	Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm
1 x	Kwik link pequeño (10 pcs)
1 x	Polea de bronce 10/2 (2 pcs)
1 x	Pin Ø 2 mm para Kwik link MPJ2162/2163 (6 pcs)
1 x	Kwik link metálico M3 (10 uds)
1 x	Pîn 3,0 terminales riostras M3,0 ⌀ (6 pcs)
1 x	Kwik link blanco largo (10 pcs)
1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm
1 x	Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Polea de bronce 12/2 (2 pcs)
1 x	Cono INO de 57 mm (Imitacion carbono)
1 x	Cono INO de 75 mm (Imitacion carbono)
1 x	Cono carbono para F3A 75 mm para Hacker C-50
1 x	Cono plástico blanco hélice fija 51 mm diámetro / eje 4,0 mm
1 x	Cono INO de 82 mm (Imitacion carbono)
1 x	Cono carbono para F3A 95 mm
1 x	Cono carbono para F3A 85 mm para Hacker Q-80
1 x	Cono FALCON 82 mm 3-BL carbon ventilado
1 x	Cono plástico blanco hélice fija 57 mm diámetro / eje 4,0 mm
1 x	Pasacables con soporte GFK "A" (2 pcs)
1 x	Acople ALU M3 Ø 6 (2 uds)
1 x	Ferrita 27x14x7 mm
1 x	Perfil Acero Inox. 17.8x12.4x1000 mm
1 x	Plancha contrachapado Abedul 600x300x2,5 mm
1 x	Plancha contrachapado ABEDUL 600 x 300 x 2,0 mm
1 x	Listón OBECHI 2,0x3,0x1000 mm
1 x	Set clevis para pull-pull (TY13233 y TY13234)
1 x	Tensor de riostras M2,5x32/48 (2pcs)
1 x	Tensor de riostras M2x22/35 (2pcs)
1 x	Polea de bronce 2,5/1 (2 pcs)
1 x	Polea de bronce 5/1,5 (2 pcs)
1 x	Terminales riostras M2 (10 uds)
1 x	Listón de PINO 2,0x2,0x1000 mm
1 x	Listón de TILO 2,0x2,0x1000 mm
1 x	Plancha contrachapado HAYA 600 x 300 x 2,0 mm
1 x	Listón de NOGAL 3,0x3,0x1000 mm
1 x	Plancha contrachapado Abedul 600x300x4,0 mm
1 x	Listón de PINO 2,0x10,0x1000 mm
1 x	Listón de NOGAL 2,0x2,0x1000 mm
1 x	Plancha contrachapado Abedul 600x300x3,0 mm
1 x	Plancha contrachapado Abedul 600x300x1,2 mm
1 x	Listón de CAOBA 2,0x2,0x1000 mm
1 x	Listón de HAYA redondo 3,0 x 1000 mm
1 x	Listón de CAOBA 1,5x1,5x1000 mm
1 x	Plancha contrachapado Abedul 600x300x2,0 mm
1 x	Listón de HAYA redondo 2,0 x 1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Plancha contrachapado Abedul 600x300x4,0 mm
1 x	Plancha contrachapado Abedul 600x300x1,5 mm
1 x	Plancha de limoncillo 600x300x2.0 mm
1 x	Listón de PINO 3,0x10,0x1000 mm
1 x	Listón de PINO 1,5x3,0x1000 mm
1 x	Plancha contrachapado Abedul 600x300x3,0 mm
1 x	Plancha contrachapado Abedul 600x300x2,0 mm
1 x	Listón de TILO 3,0x3,0x1000 mm
1 x	Listón de HAYA redondo 4,0 x 1000 mm
1 x	Listón de NOGAL 1,5x1,5x1000 mm
1 x	Borde Salida BALSA 35x8x1000 mm
1 x	Hélice BIELA 19x10 3Bl (Tripala)
1 x	Hélice BIELA 17x10 3Bl SCALE (Tripala)
1 x	Hélice BIELA 22x12 3Bl (Tripala)
2 x	Hélice MENZ-S 19x8 Tripala
2 x	Hélice MENZ-S 20x8
1 x	Hélice MENZ-S 20x10 Tripala
1 x	Hélice MENZ-S 18x10
1 x	Cono Aluminio hélice fija 50 mm diámetro / eje 5,0 mm
1 x	Round Rod 1,0x3,5 cm
1 x	Kwik link micro (10 uds)
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Regulador KOSMIK 200+ HV
1 x	Hélice BIELA 23x10 (4 Palas) Escala
1 x	Hélice BIELA 23x8
1 x	Hélice BIELA 24x8
1 x	Hélice BIELA 18x10
1 x	Hélice MENZ-S 16x10
1 x	Hélice MENZ-S 17x10
1 x	Hélice MENZ-S 16x10 Tripala
1 x	Hélice MENZ-S 16x12
1 x	Hélice MENZ-S 15x6
1 x	Hélice MENZ-S 17x6
1 x	Hélice MENZ-S 16x8 Tripala
1 x	Hélice MENZ-S 16x6 Tripala
1 x	Hélice MENZ-S 17x8
1 x	Hélice MENZ-S 20x9
1 x	Hélice MENZ-S 19x8
1 x	Hélice MENZ-S 21x10 Tripala
1 x	Hélice MENZ-S 18x12

3,875.31EUR