1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Comentarios
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
1 x Motor DLE 200cc Std
1 x Motor DLE 430 cc - Paramotores
1 x Motor DLE 170 M - Paramotores
1 x Corona grade autoarranque DLE-170M
1 x Motor DLE 200cc Premium Muffler
1 x Bayoneta ULTIMATUM 2.0 m
1 x Prolongador Futaba macho 40 cm de silicona
1 x Prolongador JR/Graupner hembra 40 cm de silicona
1 x Terminales riostras M2,5 (2 pcs)
1 x Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x Cable carga emisora GRAUPNER
1 x Piloto JAN 1/4 Veleros
1 x Prolongador cable servo 0,14 PVC, conector ZH micro
1 x Terminales riostras M3 (10 uds)
1 x Soporte WingFix ULTRA BE
1 x Soporte para aviones
1 x Medidor angulos tamaño pequeño
2 x Cable BEC 30 cm (macho)
1 x Equilibrador hélices
1 x Ball Link ALU M3 - RH (1 pcs)
1 x CC 05
1 x Adaptador MPX-XT60 10cm
1 x Piloto civil "G-Man" tamaño 9cm (Slimline)
1 x Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Ball link ALU M3/2 con rodamiento (1 pcs)
1 x Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x Soporte Pitot JETI
1 x Ball link ALU M2,5/2 con rodamiento (1 pcs)
1 x Cargador LiPo Charger4
1 x Cable "Y" equilibrador 7S, 2x JST-XH / 1x JST-EH
1 x Adaptador (GP/KO hasta 4S) para CellPRO 4S
1 x Cargador Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x Cristal Universal RX 35.150 Ch 75
1 x Cristal Universal RX 35.070 Ch 67
1 x Cristal TX 35.050 Ch 65
1 x Cristal de Emisora 35 Mc/s Ch 62
1 x Cargador para AA/AAA Ni-MH & Ni-Cd
1 x Cristal Universal RX 35.090 Ch 69
1 x Soporte ECU Xicoy X-45
2 x Piloto jet 130 mm
1 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x Hélice POWER-PROP 7x7
1 x Prolongador servo 15cm MULTIPLEX
1 x Cable silicona macho batt. receptor 30 cm (Graupner)
1 x Soporte bomba Xicoy X45
1 x Piloto Jet "Green" 1/6 Scale
1 x Terminales de mando o arriostrado aluminio rojo M3, 4 mm (4 pcs)
1 x Terminales riostras M3 (10 uds)
1 x Prolongador silicona 10 cm (Futaba)
1 x Alambre cobre esmaltado 3 hilos trenzados rojo/negro/cobre Ø0,2
1 x Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Cable carga bateria transmisor Graupner 2x0,5 qmm (50 cm)
1 x SIMtransmitter 6 Modo 2
1 x Gancho remolque inferior plano
1 x Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm
1 x Prolongador silicona 100 cm (Graupner)
1 x Piloto 1/10 "Jack"
3 x Soporte conector MPX enrasado (6 pcs)
1 x Cable "Y" equilibrador 6S, 2x JST-XH / 1x JST-EH
1 x Piloto 1/6 "John"
1 x Adaptador 3 LiPos XH>EH
1 x Acoplador para cable M4 (10 pcs)
1 x APM2,6 Power module con BEC 5,3 V DC
1 x PIX Hawk con accesorios
1 x Prolongador Futaba 100 cm Ø 0,35 mm
1 x Tapa estado carga XT-60 (6 pcs)
1 x Prolongador servo 20 cm HITEC/JR
1 x CM-3
1 x Cable "Y" 15 cm
1 x Extractor piñones 2.3/3.2 mm
1 x Cable carga bateria transmisor Futaba 2x0,5 qmm (50 cm)
1 x Extension silicona 30 cm hembra (Futaba)
1 x Cable "Y" equilibrador 5S, 2x JST-XH / 1x JST-EH
2 x Bidule 55 V3 2460 mm
1 x Bidule 111 3000 mm
1 x SkyMaxx 1.550 mm (kit)
1 x Bidule 111 3000 mm, Cabina
1 x Carbon CUB FX-3 100-200 ARF, 4200 mm
1 x Bidule 55 2460 mm, Cabina
1 x EXTRA NG 74" white/red/blue (Skywing RC)
1 x Palas de autogiro de 330 mm
1 x Ball link Aluminio M3 (2 pcs)
1 x Bascula precision 0.1-2000 g
1 x Epoxy 5 min. 500 g (Acelerador)
1 x Epoxy 40 min (Resina). 5 Kg
1 x Conector FESTO "Y" 6-6-6 mm
1 x Escape Pitts en kit para CAP 21
1 x Abrazadera para escape de 50 mm
1 x Junta humo metalica G35 DLE35
1 x Abrazadera para tubo de teflón Ø29 mm ext (1 pcs)
1 x Junta humo metalica G85 (DLE85/DLE170)
1 x Resina Epoxy L-385 con catalizador H385 (7 kg total)
1 x Barra pegamento caliente Negro
1 x Arrancador 12v (Max 180 and 30ccm)
1 x Bisagra cilíndrica 48 mm Ø 2,5 mm (5 pcs)
1 x Batería Panasonic Eneloop AA 1,2 V 1900 mAh
1 x Anemometro Xplorer4
1 x Aro pasacable Ø20 mm (4 pcs)
1 x Base para servo
1 x Bisagra cilíndrica 33 mm Ø 2 mm (5 pcs)
1 x Epoxy 40 min (Acelerador). 1 Kg
1 x Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
1 x Conector FESTO "T" 6-6-6 mm
1 x Pasa muros FESTO 4-4 mm
1 x Filtro FESTO 4 mm
1 x Conector FESTO M3 Quick 3mm 90º
1 x Conector FESTO 3-3mm
1 x Grifo FESTO 4-4 mm
1 x Conector FESTO "T" 4-4-4 mm
1 x Racor 3/3 mm
1 x Conector FESTO M7 racor XL Tygon
1 x Conector FESTO "Y" 2 mm
1 x Cigüeñal DLE 40
1 x Rueda FEMA 82 mm / 5 mm
1 x Rueda de cola 22 mm
1 x Rueda FEMA 140 mm / 6 mm
1 x Servo MKS HV6150 "anclaje horizontal"
2 x Hacker X-Pro USB interface V2
1 x Conector alas/fuselaje PWC4 para 4 servos
1 x Kwik link micro (10 uds)
1 x Piloto civil "Pamela" tamaño 9cm (Slimline)
1 x Pin 2,5 terminales riostras M2,5 ⌀ (6 pcs)
1 x Interface Jack Adapter IKARUS
1 x DPSI Ampere & Voltage bundle
1 x DPSI Micro-DualBat 5.9V / 7.2V MPX-JR (Alimentación doble)
1 x Pasa muros FESTO 6-6 mm
1 x Junta humo metalica G30 (DLE30/DLE60)
1 x Escape O-ring Saito FG-73 5cyl
1 x Escape Pitts OS MAX.35.40 FP
1 x Extensión escape motor OS 120 AX
1 x Junta humo metalica G55 (DLE55/DLE111/DLE222)
1 x Escape Pitts D.A. 70
1 x Rueda FEMA 127 mm / 6 mm
1 x Conector AWG Macho 16 pines
1 x Condensador 1640 Addcap
1 x Interruptor canal todo/nada 3 posiciones Largo FX
1 x Interface REVOLECTRIX USB para CellPRO 10s
1 x Helice PT 20x13 EL Tripala
1 x Helice PT 21x13 EL
1 x Soporte Angular conector XT-60 (2 pcs)
1 x Pin Ø 1,6 mm para Kwik link MPJ2160/2161 (6 pcs)
1 x Polea de bronce 14/2 (2 pcs)
1 x Brazo servo doble alu. RHINO
1 x Hélice PT 16x10 E
1 x Aro pasacable Ø25 mm (4 pcs)
1 x Porta Kwik link M4 3 mm (2 pcs)
1 x Modulo PPM Encoder
1 x EasyFLY Addon
1 x Cable BEC 30 cm (hembra)
1 x Servo-V-Limiter 5.2V
1 x Tensor de riostras M2x29/43 (2pcs)
1 x Sistema para cables con tensor (negro)
1 x Acople ALU M2,5 Ø 6 (2 uds)
1 x Prolongador macho/hembra equilibrador Thunder Power 6S
1 x Tensor de riostras M1,6x17/27 (2pcs)
1 x Sistema para cables (plata)
1 x Piloto 1/10 "Jimmy"
1 x Soporte bomba/flitro Xicoy X45
1 x Soporte conector XT-60 (2 pcs)
1 x Piloto 1/12 "Cougar"
1 x Gancho de remolcador
1 x Brazo de servo 40 mm con rodamiento (2 pcs)
1 x Adaptador 2 LiPos XH>EH
1 x Gancho de remolque hasta 4,5 m
1 x Interface Realflight Simulator
1 x DEMON CORTEXpro
1 x Cable de entrenamiento para GWS T4A II (maestro-alumno)
1 x Jodel D.9 BeBe 2.400 mm Kit
2 x METEOR 1.000 mm kit
23,836.57EUR
Fabricantes
Información del Fabricante
Saito
Otros productos
Idiomas
Español English
Monedas