130.00EUR

Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor
[ROIEV800D]


Gafas FPV Eachine EV800D

Dimension: 180*145*82mm
Weight: 362g without antenna
Belt : three-way adjustable belt

Specification
Build in DVR
Record up to 720*576px full frame rate video, no frame lost (C10 card required)
Replay in MENU
Require C10 card to record full frame rate
Diversity Super sensitiveness in 2pcs RX5808 PRO modules
Great performance when two types (Linear and Omni) antennas are used
Display Screen size: 5.0 inch
Screen resolution: 800*480(No blur after enlarge by the lens)
Screen brightness: 600cd/m2 with special high brightness backlight LED for outdoor FPV
View Angle: 140/120 degree(Horizontal/Vertical)
Lens 3x boost of the video to acquire intense feel-in-there video; 92% transparent rate distort if light;
Battery Built-in 7.4V/1200mAh battery;
Each battery circle offer around 2hr working time;
11-20V wide range recharging voltage range, typical recharging voltage is 12V 2S (7.4 V) /3S(11.1V) battery as back-up power t to have long working time.
Frequencies (5.8GHz, with RaceBand)
CH CH 1 CH 2 CH 3 CH 4 CH 5 CH 6 CH 7 CH 8
GROUP A or FR1 5865 MHZ 5845 MHZ 5825 MHZ 5805 MHZ 5785 MHZ 5765 MHZ 5745 MHZ 5725 MHZ
B or FR2 5733 MHZ 5752 MHZ 5771 MHZ 5790 MHZ 5809 MHZ 5828 MHZ 5847 MHZ 5866 MHZ
C or FR3 5705 MHZ 5685 MHZ 5665 MHZ 5645 MHZ 5885 MHZ 5905 MHZ 5925 MHZ 5945 MHZ
D or FR4 5740 MHZ 5760 MHZ 5780 MHZ 5800 MHZ 5820 MHZ 5840 MHZ 5860 MHZ 5880 MHZ
R or FR5 5658 MHZ 5695 MHZ 5732 MHZ 5769 MHZ 5806 MHZ 5843 MHZ 5880 MHZ 5917 MHZ

Features:
Built-in with super HD DVR record up to 720*576px resolution
Diversity RaceBand 40ch Auto-Searching
Two system (Display/Record duo core separated chipsets ) ensure no delay in displaying and no frame lost in recording(please use C10 super speed card to ensure the full frame recording)
Work friendly with pilot-OSD, no block on the important flying OSD information; Separable design, 5 inch screen can be used as small monitor on radio controller or with tripod;
HD high brightness 5 inch LCD specially tuned for FPV racing;
Diversity function, Built-in super sensitive 5.8GHz 40ch receiver module, with RaceRand;
Advanced auto-searching function and the working frequency show on screen;
Built-in 7.4V 1200mAh battery, each full charge offer 2 hours working time;
Wide range re-charge voltage 11-20V;
Accept 2S or 3S batteries as back-up power source, to prolong the working time; Nice ergonomic design and fit different faces;
Super-wide visible angle up to 82 degree;
92% transparent lens adopted, no distort, no blur on the edge of screen;
Light weight 375g with 3.5 hr 2000mAh battery, RTF for any scale racing game;
5 Inch 800*480px HD high brightness LCD

Package Included :
+ 1 x Eachine EV800D
+ 1 x Charger
+ 1 x 5.8G halfplanner antenna with RP-SMA connector
+ 1 x 5.8G RHCP cloverleaf antenna with RP-SMA connector
+ 1 x AVin cable
+ 1 x DCpower cabler to 3S balancer plug cable
+ 1 x Fresnel lens clearning kit
+ 1 x Instruction manual (English)


few units
few units

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x TP/TopFuel - XH 2/3S Adapter
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x 2 LiPo XH>EH adapter
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x MPX-Dean "T" Adapter
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x CC 05
1 x 30 cm BEC cable (female)
1 x Dean "T" - Futaba Adapter
1 x Cabel charger transmitter GRAUPNER
2 x TrainerCord (master-learner)
1 x 30 cm BEC cable (male)
1 x BEC 3A FOXY
1 x USB HLS prog. interface
1 x Adapter lead MPX/EC3
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x CM-3
1 x CC 03
1 x 5 LiPo XH>EH adapter
1 x Circlick securite
1 x Ball link Aluminio M3 (2 pcs)
1 x Threaded coupler M3 (10 uds)
1 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x Brass ball links BS M3 V1 (10 pcs)
1 x Aluminium blue ball links M3 V1 (10 pcs)
1 x Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Aluminium coupler M3/2 with ball bearing (1 pcs)
2 x Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Aluminium coupler M2/2 with ball bearing (1 pcs)
2 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Ball link V1 Ø7 M4/3 (6 uds)
1 x Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x Kwik link AL M3 con Clip (2 pcs)
1 x Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x Z type of cable coupler Ø 2 (2 uds)
2 x Couple M4 for wire (10 pcs)
2 x Opale Rucksack
1 x Set cintas unión paracaídas 145 cm
2 x Rescue 1,8m2 / BackPack
2 x Surface Indicator Gauge Small
1 x Medidor ángulos y/o incidencias
1 x Propeller balancer
1 x Tube Pitot to PIXHAWK
1 x PPM Encoder Module
1 x Civilian pilot "G-Man" size 9cm (Slimline)
1 x Oracover GREY Seafire Sea 2m
1 x 10m servo "Premium" wire (white/red/blue)
1 x Silicone red 0,25 mm² wire (25 m)
1 x 2 mm female connector (2 pcs) with safety connector
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x Digital weight, angle and balance meter BASIC
2 x 3 LiPo XH>EH adapter
1 x 4 LiPo XH>EH adapter
3 x Long Switch On/Off micro
2 x DPSI magnetic switch actuator (housing)
1 x Micro Switch button
2 x MAX BEC 2
2 x Electronic switch JETI SP6 0-15v/6A
1 x Hacker X-Pro USB interface V2
1 x SPARK Switch 5.9v
2 x MAX BEC 2D plus EX
1 x Prolonguer for Balancer Thunder Power 6S
1 x Interruptor SPS 70v 60/120A
2 x Support ECU Xicoy X-45
2 x Support conector MPX (6 pcs)
2 x Recessed MPX connector support (6 pcs)
1 x Support pumb/filter Xicoy X45
2 x Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
2 x APM2.6 Power module with 5.3V DC BEC
1 x Blades 330mm
2 x RX cabel
1 x Para-RC Trike "RC-Bullix"
1 x Pulley brass 2,5/1 (2 pcs)
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Parachute BACKUP X100
1 x Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs)
1 x Wing OXY 0,5 pulgadas2
1 x Paramotor BackPack XXS (without accessories)
1 x Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs)
1 x SD HC 8 GB
1 x Landing gear Rocket 400
1 x BRASS CONTROL HORN M3x16 mm 2pcs
1 x Crimping sleeves for 1.1 mm cable (10 pcs)
1 x Pulley brass 5/1,5 (2 pcs)
1 x Propeller set 400 (2R+2L)
1 x CC 02
1 x Pulley brass 6/1,5 (2 pcs)
1 x MAX pilot ARTF
1 x Pulley brass 2,5/1 (2 pcs)
1 x Adapter lead MPX/XT60
2 x Propeller balancer
2 x Angle of incidence meter
2 x Truck-trailer for gliders 720 x 239 mm
1 x Field folding model stand
1 x Truck-trailer for gliders 720 x 285 mm
1 x Servo FUTABA BLS172 SV
1 x Servo FUTABA SBL 471 SV
1 x Servo FUTABA S 9670 SV
1 x SERVO DES 568 MG
2 x Multi-adapter balancer JST/C - TP
1 x Selfstart electronic switch
2 x Servo slow down unit (0,7-14,7 sec )
1 x Field folding model stand SebArt
1 x Xplorer4 anemometro
2 x Aro pasacable Ø25 mm (4 pcs)
2 x Female connector for 16 pines AWG
1 x MPS Gas-Cap-Powerswitch
1 x Male connector for 20 pines AWG
2 x Extension 6 lipos XH > EH
2 x Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x EWC3 40 cm wing connector
1 x Switching module high voltage SXH
1 x Extension 5 lipos JST/C
1 x JETImodel SINGLE BEC
1 x SWTU2 switch
1 x SBEC Jeti
1 x Female connector JST SH 1.0mm with 10 cm wire
1 x Tapa estado carga XT-60 (6 pcs)
1 x Cabling for Fox MDM1 wings
1 x PWC4 wing/fuselage connector for 4 servos
1 x Three-position switched channel, short
1 x Connector CAN 15
1 x Female connector for 12 pines AWG
1 x Extension 5 lipos JST/C - JST
1 x SBEC 40
1 x PSC 6
1 x PowerBox SparkSwitch RS
1 x Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x Male connector for 12 pines AWG
2 x Extension 2/3 lipos JST/C
2 x Interruptor RX/Batterie
1 x Male connector for 6 pines AWG
1 x USB interface ALTIS
1 x Female connector for 6 pines AWG
1 x JETImodel DPS 40
1 x Female connector for 10 pines AWG
1 x MAX BEC
1 x Opto Gas Engine Kill Switch
1 x JETImodel Addcap 1640
1 x SPS 70V 140/280 A
1 x Electronic switch JETI SP06 Opto
1 x Opto Gas Engine Kill Switch
1 x Male connector for 16 pines AWG
1 x Extension 2/3 lipos JST - JST/C
1 x Futaba External voltage input cable Futaba CA-RVIN-700
1 x FX three-position switched channel, long
1 x SPS Remote switch actuator
1 x EWC6 40 cm wing connector
1 x ABS angle 2,0x2,0x1000 mm
1 x Support Antena 2.4 Ghz (2 pcs)
2 x Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re
1 x Electric Landing Gear ODYSSEY +GS200 (Elektron Retracts)
1 x Electric Landing Gear GS-200 ULTIMATUM 2.0 (Elektron Retracts)
1 x Set Stickers Ultimatum 2.0 - Andy Folienwelt
1 x resin-hardener L-385 H-385 (5000 g)
1 x Motor OS 3820-1200 electric
1 x 1804 2400KV Brushless Motor Qav 250 mini
1 x Motor Mega AC 22/20/03
1 x Motor Mega AC 16/30/01
1 x Motor Mega AC 16/15/07 COMBAT
1 x Motor Mega AC 16/07/12
1 x Motor Mega AC 22/45/03 E
1 x Motor Mega AC 16/25/06
1 x Motor Mega AC 16/25/02
1 x Electric Landing Gear ASPIRE (Elektron Retracts)
1 x 20-25mm Servo Arm
1 x Brake disc Electron Retracts
1 x Electric Landing Gear AVANTI XS (Elektron Retracts)
1 x Nose wheel 62 mm
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x SPARK Switch 7.4v
1 x Switc electronic 30 Amp
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x Propeller RABOESCH M3 50 mm (3 Blades pr) (Right hydropropeller)
1 x L-Connector 1.5 mm x 1000 mm
1 x Flat Connector 4.0 mm x 1000 mm
1 x Rigid coupling brass Ø 5.0 / 4.0 mm L: 25 mm
1 x U Profile ABS 8,0x4,0x1000 mm
1 x Cross Connector 4.0 mm x 1000 mm
1 x SPARK Switch 12v
1 x Propeller APC 11x8.5 Electric
1 x Propeller APC 13x6.5 Electric Pusher
1 x Electric Landing Gear "Black Edition" ULTIMATUM 2.0 (Elektron Re
1 x Electric Landing Gear RS-200 w/o programmer ULTIMATUM 2.0 (Elekt
1 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x Set transmisions ULTIMATUM 2.0 (dura/aluminium)
1 x Bags de Luxe ULTIMATUM 2.0
1 x Tank ULTIMATUM 2.0 (3.2 L) PRO
1 x Wing Joiner ULTIMATUM 2.0 m
1 x Set transmisions ULTIMATUM 2.0 (stainless/aluminium)
1 x Jet Pipe for ULTIMATUM 2m
1 x PIX Hawk with accesories
1 x FA27.2×8.9 Prop-2PCS/PAIR
1 x 29,0 mm propeller (left propeller)
1 x Ball link duraluminium M3 V1 (10 pcs)
1 x 3 mm Prop Adapter M6
1 x 25 mm fenders (10 pcs)
1 x Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x 290 mm 8x4 M4 shaft ship
1 x 2 mm Prop Adapter M6
1 x 12 mm mast holder
1 x 11x7 tree blades propeller
1 x 3.2 mm Prop Adapter M8
1 x 3.17 mm Prop Adapter CN-Spinner
1 x 14 mm portholes (10 pcs)
1 x 15x7 tree blades propeller
1 x EVP Unit for AXI2208/xx and 2212/xx
1 x Anntena Panel 5,8 GHz - 14 dBi
1 x ER-40eVo Set A [2x ER40 + RB-45]
1 x 270 mm 3/3 mm shaft ship
1 x Rigid coupling brass Ø 2 mm L: 15 mm
1 x U Profile ABS 1,0x2,0x1000 mm
1 x 290 mm M4/M4 6.0x4.0 mm shaft ship
1 x L-Connector 4.0 mm x 1000 mm
1 x Propeller RABOESCH M4 40 mm (3 Blades) (Left hydropropeller)
1 x T-Connector 4.0 mm x 1000 mm
1 x Propeller RABOESCH M4 45 mm (3 Blades pr) (Right hydropropeller)
1 x 290x4 mm M4 shaft ship
1 x Rigid coupling brass Ø 3 mm L: 20 mm
1 x Propeller RABOESCH M3 50 mm (3 Blades pr) (Left hydropropeller)
1 x Rigid coupling brass Ø 4.0 / 3.2 mm L: 25 mm
1 x 290 mm M4 7/8x212 mm shaft ship
1 x ABS tube 5.0x4.0x156 mm
1 x U Profile ABS 2,0x4,0x1000 mm
1 x U Profile ABS 5,0x10,0x1000 mm
18,986.13EUR
Manufacturers
Manufacturer Info
Roi-Import
Roi-Import Homepage
Other products
Languages
Español English
Currencies