Top » Catalog » Hardware » Power supply system/Data Recordi » Jeti » JETCB320

398.99EUR

DUPLEX 2.4EX Central Box 320
[JETCB320]

JETI Duplex 2.4EX Central Box 320

Product description and features
The Central Box 320 is designed for a complete management of multiple servos and two receiver batteries for a model with high security requirements. The Central Box 320 has an overload protection on each servo output, 8 channels for high-performance servos up to 60 kg / cm and 10 channels for standard servos up to 30 kg / cm. Especially for the use of powerful and power-hungry servos, the Central Box 320 has an aluminum housing for better cooling. The Central Box 320 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.
Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 320 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.

Compatibility with Futaba
The Central Box 320 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.
Switching on and off
The switching on and off process of the Central Box 320 is done with the supplied magnetic switch.
Recommended receivers
As receiver e. g. 2 RSat2 or REX3 receivers can be used. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.

Features
Adjustable powerful BEC for voltage stabilization (connection of standard or HV servos)
DITEX servo telemetry support
Possibility to connect up to 3 receivers with serial communication
built-in Expander function with the possibility of independent connection of up to four JETI EX sensors
Input for magnetic switch or RC switch
Power supply batteries connected via MPX connector
100Hz mode of servo outputs (10ms period)
EX telemetry support (measurement of voltage, current, capacity, temperature, etc.)
Easy settings changes via DC/DS transmitter („Device explorer“)
Robust metal construction with mounting holes

temporarily out of stock

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
    Bavarian Demon
    Dymond
    Eagle Tree
    Emcotec
    Futaba
    Jeti
    PowerBoxSystems
    ROI IMPORT
    SebART
    Setlo
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

P-47 Thunderbird Deco 04
3,990.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Hot Glue Stick BLACK
1 x	Vacuum pump 12 CFM
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x	Spray adhesive INFUTAC (Clear) 500 ml
1 x	Receptor GRAUPNER GR-24 HoTT
1 x	DUPLEX USB Adapter
1 x	Suport PITOT
1 x	DUPLEX TGs 2,4 GHz (transmitter module)
1 x	DUPLEX 2.4EX MSpeed PITOT <300 Km/h
1 x	DUPLEX 2,4GHz MRPM EX
1 x	Anodized aluminium servo M4x5/8 screw (4 blue pcs)
1 x	White smoke bombs AX-18 (5 pcs)
1 x	Conector FUTABA Servo female BLUE silicon (10 pcs)
1 x	Conector JR/Uni Servo male BLUE silicon (10 pcs)
1 x	Recessed MPX connector support (6 pcs)
1 x	Aluminium cap bolt washer M3 green (8 pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 silver pcs)
1 x	Blue smoke canister 100 g
1 x	4 mm M3 red control terminal (4 pcs)
1 x	Cable coupler M2 (10 uds)
1 x	DEMON CORTEXpro
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	12 mm floating pad (49 pcs)
1 x	Conector JR Servo female (10 pcs)
1 x	Anodized aluminium M4x0,7x20 mm screw (4 blue pcs)
1 x	Cable control set
1 x	Silicone 0,25 qmm servos wire Graupner (100 m)
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Small aluminium horn gold (2pcs)
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Short ball link M3 (6 uds)
1 x	Short ball link M2 (6 uds)
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	6 mm blue aluminium threaded horn with patella
1 x	Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x	200m servo "Premium" wire (white/red/blue)
1 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x	Horn with ball 55x40
1 x	100m servo "Premium" wire (white/red/blue)
1 x	M2 5Diam black ball link V2 (2 pcs)
1 x	Joint with bearing M2,5 22x5,5
1 x	Carbon fiber rod 20 mmx1000 mm
1 x	M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x	M2,5 Diam metal short ball link V3 (2 pcs)
1 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x	Propeller Pleg CAM Carbon 13x11
1 x	Profile ABS Square 2 x 1000 mm
1 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x	L-Connector 1.0 mm x 1000 mm
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	160 mm carbon undercarriage (2pcs)
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	DPS Switch JR/JR
1 x	ABS angle 10,0x10,0x1000 mm
1 x	Propeller Pleg CAM Carbon 16x13
1 x	DPSI RV Mini 5 Magic
1 x	Presto SF Light Filler styrene-free (420 g)
1 x	Vasa model Catapult
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	Bungee HLG Premium
1 x	1000 ml sealer (DOPE)
1 x	ABS Strip 1.5x8.0x1000 mm
1 x	Z Bender - S Type Tool
1 x	DUPLEX 2.4EX MULi 6s M
1 x	DUPLEX 2.4EX MT 300 EX
1 x	Duplex 2.4 EX TopFuel MTAG Battery Reader
1 x	Pitot tube JETI MSpeed DUPLEX
1 x	Sensor DUPLEX 2.4EX MUI 200 MULi 6S for measuring voltage on LiX
1 x	Sensor DUPLEX 2.4EX MUI 200
1 x	Tube support Ø 6mm (10 pcs)
1 x	Cable coupler M3 (10 uds)
1 x	Red smoke canister 140 g
1 x	Blind nut M2 (10 pcs)
1 x	Aluminium cap bolt washer M4 green (8 pcs)
1 x	Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs)
1 x	White smoke canister 100 g
1 x	Blind nut M5 (4 pcs)
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	15 mm floating pad (30 pcs)
1 x	Cable coupler M2x66 (2 uds)
1 x	Red smoke canister 100 g
1 x	Banna gold connector 2,5 mm (M/F)
1 x	Parachutist
1 x	10 mm floating pad (72 pcs)
1 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x	Mixers smoke bombs AX-60 (5 pcs)
1 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Conector JR Servo female (10 pcs)
1 x	Propeller Pleg CAM-Prop 8x6
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Horn 5/20 with M2 Bearing
1 x	PVC 0,14 qmm servos wire Graupner (100 m)
1 x	Joint with bearing M3 22x5,5
1 x	3 LiPo XH>EH adapter
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	ABS tube 8.0x6.0x1000 mm
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Dean "T" - Futaba Adapter
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Actuador lineal HLS12-100210-7.4v
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	ABS tube 16.0x14.0x1000 mm
1 x	ABS tube 6.0x4.0x1000 mm
1 x	Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x	Carbon fiber rod 16 mm x 1000 mm
1 x	Propeller Pleg CAM Carbon 15x13
1 x	Prop Shaft Adapter 5 mm/M8 "long"
1 x
1 x	Dumper propeller 6/8 mm
1 x	1/10 Pilot "Jimmy"
1 x	1/12 Pilot "Tom"
1 x	Propeller Pleg CAM Carbon 10x12
1 x	Piloto JET 1:3,5
1 x	DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Propeller Pleg CAM Carbon 12x5
1 x	Round Rod 1,0x1000 mm
1 x	Round Rod 1,5x1000 mm
1 x	Strip ABS 2.0x10.0x1000 mm
1 x	Strip ABS 2.0x5.0x1000 mm
1 x	Hot Glue Stick GREEN
1 x	VPP system propeller for AXI VPP motors (spare)
1 x	Starter Sullivan-STAR 603 DINATRON
1 x	Round Rod 2,5x1000 mm
1 x	Z Bender - S Type Tool
1 x	Strip 2,5x1,25x330 mm
1 x	DUPLEX 2.4EX Central Box 320
1 x	Round Rod 3,0x1000 mm
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	Strip 3,5x1,75x330 mm
1 x	Universal Colour Paste deep black 50 g
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	Plasti Dip Liquid Tape 429 ml orange
1 x	ABS Strip 1.5x4.0x1000 mm
1 x	DUPLEX 2.4EX Central Box 220 + 2x Rsat2
1 x	ABS I Strip 10x5x1000 mm
1 x	Spray EC Red 400ml
1 x	Partall paste 650 g
1 x	ABS Strip 1.5x3.0x1000 mm
1 x	Starter 12v (Max 90 and 15ccm)
1 x	ABS I Strip 20x10x1000 mm
1 x	Spray adhesive AEROFIX 2
1 x	DUPLEX 2.4EX Central Box 220
1 x	Ball Link Plier
1 x	Universal Colour Paste deep black 250 g
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	Round Rod 2,0x1000 mm
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	DUPLEX 2.4 EX MVario2
1 x	DUPLEX 2.4GHz GPS
1 x	DUPLEX 2.4EX Expander E2
1 x	DUPLEX 2.4EX RC Switch
1 x	DUPLEX MRMP Hall EX
1 x	DUPLEX 2.4EX RC Power Switch 10
1 x	DUPLEX 2.4EX Expander E4
1 x	Receiver GRAUPNER GR-16 HoTT
1 x	MT 125 temperature sensor
1 x	Receiver GRAUPNER GR-12 HoTT
1 x	DUPLEX MUI 30 Sensor
1 x	DUPLEX 2.4 EX MBar
1 x	DUPLEX 2.4EX MAlti (Rev.2)
1 x	DUPLEX 2,4GHz MRPM-AC EX
1 x	White smoke canister 140 g
1 x	Angle support XT60 conector
1 x	Connectors banna oro 2 mm (M/F)
1 x	Couple M4 for wire (10 pcs)
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	Connectors banna oro 3,5 mm (M/F)
1 x	Cable coupler M2 (10 uds)
1 x	Initior Receiver FRX2 Wireless
1 x	Conector MR-60 (pareja)
1 x	Angled clevis with threaded rod M3
1 x	Ball link duraluminium M3 V1 (10 pcs)
1 x	Cable coupler M3 (10 uds)
1 x	Wing tips support for AX-18/AX-60 (2 pcs)
1 x	Conector FUTABA Servo male (10 pcs)
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Parachute expulsion foam
1 x	Aluminium wide washer M3 gold (4 pcs)
1 x	Support conector MPX (6 pcs)
1 x	Aluminium wide washer M4 Red (4 pcs)
1 x	Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	Initior Transmitter FTX2 Wireless
1 x	Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x	Conector Servo female 4 pines
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	"M" set
1 x	Support Flush MPX Conector (6 pcs)
1 x	Support ECU Xicoy X-45
1 x	Ball link Aluminio M3 (2 pcs)
1 x	Cable coupler M2,5 (2 pcs)
1 x	Aluminium wide washer M4 Blue (4 pcs)
1 x	Conector XT-30 (hembra)
1 x	Green smoke canister 65 g
1 x	Conector XT-30 (macho)
1 x	Smoke set "M"
1 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	30 cm MULTIPLEX female connector
1 x	Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs)
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs)
1 x	Bag connector 2 mm
1 x	3l Smoke oil
1 x	Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs)
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Black large kwik link (10 pcs)
1 x	Support FUEL DOT V3
1 x	Blind nut M4 (4 pcs)
1 x	Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs)
1 x	Kwik link AL M3 con Clip (2 pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 lilac pcs)
1 x	Conector FUTABA Servo female (10 pcs)
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
1 x	AX-60 starters (5 pcs)
1 x	Banna gold connector 2,5 mm (100 M/F pairs)
1 x	Conector XT-150 6mm (Set: 5 pares)
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Conector FUTABA Servo male BLUE silicon (10 pcs)
1 x	Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	PCARD Wireless System
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Blind nut M3 (4 pcs)
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Blue smoke canister 140 g
1 x	Conector JR Servo male (10 pcs)
1 x	Red smoke bombs AX-60 (5 pcs)
1 x	Aluminium M2x12 mm screw (4 pcs)
1 x	White smoke bombs AX-9 (10 pcs)
1 x	BRASS CONTROL HORN M3x16 mm 2pcs
1 x	Yellow smoke canister 100 g
1 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x	Aluminium cap bolt washer M3 red (8 pcs)
1 x	Aluminium red ball links M3 V1 (10 pcs)
1 x	"S" set for planes
1 x	Brass ball links BS M3 V1 (10 pcs)
1 x	Green smoke canister 100 g
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	Silicone 0,35 qmm servos wire Futaba (100 m)
1 x	Canopy Latch
1 x	4 LiPo XH>EH adapter
1 x	CC 01
1 x	6 mm ball link M3 (10 pcs)
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x	ABS tube 7.0x6.0x1000 mm
1 x	SERVO HOLDER
1 x	TrainerCord (master-learner)
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	CC 02
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	Adjustable launching hook
1 x	MPX-Dean "T" Adapter
1 x	M3 Maxi ball link (2 uds)
1 x	800TVL CMOS camera for FPV
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	ABS tube 8.0x7.0x1000 mm
1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Steering arm 16 mm Ø 3 mm
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	M3 Maxi ball link (2 uds)
1 x	Black silicone 0,25 mm² wire (25 m)
1 x	ABS tube 14.0x10.0x1000 mm
1 x	Horn with ball 40x30
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	SlowFlyer control horn (3 pcs)
1 x	Cable with accesories
1 x	Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x	30 cm BEC cable (male)
1 x	Tube Pitot to PIXHAWK
1 x	M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x	Joint with bearing M2 22x5,5
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Brass control horn M4 short for wire (10pcs)
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Socket head long ball link M3 (2 uds)
1 x	PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x	GPS Logger Dymond
1 x	Carbon fiber rod 8.0 mmx1000 mm
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
1 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	PVC 0,35 qmm servos wire Graupner (100 m)
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Horn 5/10 with M2 Bearing
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	Extinguisher CO2 - 2 Kg
1 x	Carbon fiber rod 7.0 mmx1000 mm
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	RH long aluminium horn (2pcs)
1 x	6 mm hexagonal ball link M3 (10 pcs)
1 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x	ABS tube 20.0x18.0x1000 mm
1 x	Carbon fiber rod 12 mm x 1000 mm
1 x	50m servo "Premium" wire (white/red/blue)
1 x	TP/TopFuel - XH 2/3S Adapter
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x	ABS tube 18.0x16.0x1000 mm
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Straightened threaded rod M2-1m
1 x	ABS tube 3.0x2.0x1000 mm
1 x	Covered closure or fairings
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	ABS tube 3.0x2.0x330 mm
1 x	Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x	10m servo "Premium" wire (white/red/blue)
1 x	Adapter lead MPX/XT60
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Silicone 0,14 qmm servos wire Graupner (5 m)
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x	LH long aluminium horn L31xH30 (2pcs)
1 x	Carbon fiber rod 10 mm x 1000 mm
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Straightened rod Ø 6.0 mm x 1000 mm
1 x	Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	Horn 16,5x20 mm (2 pcs)
1 x	Socket head ball link M3 (2 uds)
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Straightened rod Ø 7.0 mm x 1000 mm
1 x	ABS tube 10.0x8.0x1000 mm
1 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	30 cm BEC cable (female)
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Locking cable tie 2.5x100 (uds)
1 x	ABS tube 5.0x4.0x156 mm
1 x	ABS tube 9.0x7.0x1000 mm
1 x	Silicone 0,35 qmm servos cable Futaba (5 m)
1 x	CF tube set (Ø 38 mm y Ø 14 mm)
1 x	PVC 0,25 qmm servos wire Graupner (5 m)
1 x	Carbon fiber flat 1000x3.0x0.5 mm
1 x	Straightened rod Ø 1.5 mm x 1500 mm
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	JETImodel SINGLE BEC
1 x	M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x	Ball link M3 (6 uds)
1 x	20 mm carbon horn
1 x	Carbon fiber rod 2.5 mmx1000 mm
1 x	PVC 0,08 qmm Graupner servos wire (5 m)
1 x	Locking cable tie 4.6x203 (uds)
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Silicone 0,50 qmm servos wire Futaba (100 m)
1 x	M3 Maxi ball link (2 uds)
1 x	PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
1 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	PVC 0,08 qmm Futaba servos wire (5 m)
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	Straightened rod Ø 2.0 mm x 1000 mm
1 x	Cockpit plastic closing
1 x	Horn for flap control (1 pcs)
1 x	M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x	ABS tube 3.0x1.0x1000 mm
1 x	Green silicone 0,25 qmm wire (50 m)

11,732.70EUR