1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Rescue 1,8m2 / BackPack
1 x Ballast 700gr OPALE
1 x Paramotor Kit Camo H1.5/ Ben Red
1 x Windsock Ozone L - 700 mm
1 x Parachute PV6 for F3J
1 x Windsock Ozone L -1200 mm
1 x Paramotor BackPack XXS 2
1 x Shirt Hispano Aviación
1 x VPP system propeller for AXI VPP motors (spare)
1 x Connectors banna oro 4 mm (M/F) (ultralight)
1 x Optotronix Aurora Plug
1 x XH male balance (3S) connector (2 pcs)
1 x XH male balance (4S) connector (2 pcs)
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x Aluminium sheet 500x250x0,5mm
1 x Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x Carbon Non-crimp ST 100 g/m² 50 cm x 10 m
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x Starter EM Gear Power 250
1 x Vacuum pump 12 CFM
1 x M2,5 5Diam black ball link V2 (2 pcs)
1 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x Aero-Master Cabine (Aero-naut)
1 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Quicklock washer 2.5 mm (10 pcs)
1 x 19 mm 2:1 black termoretract tube
1 x Short ball link M3 (6 uds)
1 x 1/4 Pilot "Mike"
1 x Stainless steel cable Ø 0.5 mm (20 m)
1 x Flat washer 3.2 mm (20 pcs)
1 x Ball link M1.6 (6 uds)
1 x Crimping tool
1 x Starter 12v (Max 90 and 15ccm)
1 x Blue metalic ball link M3/3 azul (2 pcs)
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x Large flex hinge (12 uds)
1 x 58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x 3,2 mm Prop Adapter M6
1 x Vacuum pump P1-N
1 x 1/12 Pilot "Cougar"
1 x Screwdriver for Torx® TX8
1 x Xplorer2 anemometro
1 x Xoar Electric Beechwood Prop 20x10
1 x 5 mm Prop Adapter M8
1 x SERVO HOLDER
1 x Monokote PLATINO metalizado (1.8x0.65m)
1 x Aluminium cap bolt washer M4 green (8 pcs)
1 x Profile ABS Square 1 x 1000 mm
1 x Short ball link M1.6 (6 uds)
1 x 4,8x1000 mm 2:1 red termoretract tube
1 x Tape GFK 38 mm
1 x M3 black washers (4 pcs)
1 x Indoor hinge with servo arm integraded
1 x 2.3 mm Adapter for 30 mm spinners
1 x Brass hexagonal rod Ø 3 mm x 1000 mm
1 x 2,5x60 mm allen screwdriver
1 x Ball Link Plier
1 x L-Connector 4.0 mm x 1000 mm
1 x Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x 200m servo "Premium" wire (white/red/blue)
1 x Propeller APC 11x4.5 Electric Pusher
1 x White silicone 0,25 qmm wire (100 m)
1 x Propeller APC 11x8.5 Electric
1 x Parachute BACKUP X100
1 x Propeller electric carbon 8.5x5
1 x PT 16x10 E Propeller
1 x 5 LiPo XH>EH adapter
1 x Silicone red 0,25 mm² wire (25 m)
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x Aluminium red ball links M3 V1 (10 pcs)
1 x Z type of cable coupler Ø 2 (2 uds)
1 x Couple M4 for wire (10 pcs)
1 x Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x Reed valve for DA 50-R
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Propeller POWER-PROP 14x9 Izda
1 x XH male balance (5S) connector (2 pcs)
1 x Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x XH female balance (2S) connector (2 pcs)
1 x Conector BEC female (10 pcs)
1 x Banna gold connector 2,5 mm (M/F)
1 x FIALA Propeller 19x12 Electric
1 x Interface Realflight Simulator
1 x Connectors banna oro 6,0 mm (M/F)
1 x Connectors banna gold 5,5 mm (M/F)
1 x 2 mm female connector (2 pcs) with safety connector
5,205.72EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies