1 x | Silent-blocks DLE 170M |
2 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
1 x | SE Ring 330 mm (4 pcs) |
1 x | SE Ring HACKER 300 mm (2 pcs) |
1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | Motor DLE 200cc Std |
1 x | SE Ring 250 mm (2 pcs) |
1 x | Propeller FALCON 32,5x11 PUSHER Carbono |
2 x | Cinta Goldfix 1m |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | SE Ring 450 mm (2 pcs) |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | |
1 x | Motor DLE 200cc Premium Muffler |
1 x | SE Ring 240 mm (2 pcs) |
1 x | Tape GFK 38 mm |
1 x | SE Ring 350 mm (2 pcs) |
1 x | SE Ring 400 mm (2 pcs) |
1 x | Motor DLE 170 M- Paramotors |
1 x | 20x1000 mm Ring Strap Back To Back |
1 x | Foil for sticking flaps and ailerons |
1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
2 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
3 x | 20x200 mm battery rings |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
2 x | Spikes Band (5 m) |
1 x | SE Ring 200 mm (2 pcs) |
2 x | Ferrita 14x8x5.5 mm |
1 x | Ferrita 17x10x6.5 mm |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | Circlick securite |
1 x | Lock washer 2.2 mm (20 pcs) |
1 x | Round Rod 4,0x1000 mm |
1 x | 30 cm DEANS female connector |
1 x | Conector JR Servo male (50 pcs) |
1 x | Medidor ángulos y/o incidencias |
1 x | Carbon fiber rod 0.8 mmx1000 mm |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | SE Ring 360 mm (2 pcs) |
1 x | Ferrita 27x14x7 mm |
1 x | Big Crow DLE-170M |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Small Crow DLE-170M |
1 x | Quick hose connector 3-3 mm |
1 x | Body for landing gear Ø 3 mm |
1 x | Servo arm with 6 mm hole to FEMA 9800A |
1 x | Tap FESTO 6-6 mm |
2 x | Wheel collar 2 mm Ø (4 uds) |
1 x | 28 mm tailwheel unit |
1 x | Sanyo RX Battery Eneloop 6,0 V Futaba |
2 x | Sanyo Eneloop AA 1,2 V battery 2000 mAh |
1 x | Papel japones 12 grs/m2 760x510 mm JAPICO |
3 x | 28x5 mm wires output (2 pcs) |
3 x | 11 mm Rubber pads (14 pcs) |
1 x | Connectors MPX female |
1 x | Landing gear strap large (4 uds) |
1 x | Tail gear set (60-120 class) |
1 x | Tailwheel for 40/90 size |
1 x | Y-Hose connector 3-3-3 mm |
1 x | Z-shaped servo mount |
1 x | Actuator Electric 25 mm HIGH TORQUE |
1 x | Quick hose connector 3-3 mm |
1 x | Y-Hose connector 2-2-2 mm |
1 x | Wheel cover holder Ø 3 mm (2 uds) |
1 x | Landing gear strap small (4 uds) |
1 x | KIRA 480-34 5,2:1 |
1 x | KIRA 480-38 |
2 x | KIRA 480-31 5,2:1 |
2 x | BEC extension JIVE |
1 x | DRIVE 550 (KIRA 500-26 6,7:1 + KOBY 55 LV) |
1 x | KIRA 480-34 |
1 x | JIVE 100+LV Esc |
2 x | KIRA 600-17 |
1 x | Esc KOSMIK 160 HV |
1 x | JIVE 120+HV Esc |
2 x | KIRA 400-27 |
1 x | Servo holder for retract |
1 x | Restrictor FESTO 3/3 mm |
1 x | RX Battery Eneloop 4,8 V JR 2500 mAh |
1 x | Bateria LRP 2200-7.2v 6 cell NiMH |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Pushrod octagone 3/2 with coupler M2 |
1 x | Landing gear frontal support 25x32x16 |
1 x | Allen wheel collar M3x3 |
2 x | 38x4,5 mm wires output (2 pcs) |
1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
2 x | Allen wheel collar M4x6 |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Wheel collar 4 mm Ø (4 uds) |
1 x | Landing gear frontal support 29x26x13,5 |
2 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
2 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Steering arm 16 mm Ø 4 mm |
2 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Propeller 8x4,3 SlowFlyer |
1 x | FAN KOSMIK |
1 x | Tail wheel for 8-12 kg models |
1 x | Surprise XII Horizontal Estabilizer (Freudenthaler) |
1 x | Wheel FEMA 165 mm / 8 mm |
1 x | Landing gear clamp for Ø 4 mm (4 uds) |
1 x | Compact on-board starting system (9525) |
1 x | Nylon threaded block M5 (2 uds) |
1 x | Landing gear axle Ø 8 mm (2 uds) |
1 x | Wheel FEMA 152 mm / 8 mm |
3 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Sanyo RX Battery Eneloop 4,8 V JR |
1 x | Sanyo RX Battery Eneloop RX 4,8 V Futaba |
1 x | Sanyo RX Battery Eneloop 4,0 V AAA JR |
1 x | Sanyo TX Battery Eneloop 7,2 V MPX |
1 x | Sanyo RX Battery Eneloop 4,8 V JR |
1 x | Sanyo Eneloop AAA 1,2 V battery 800 mAh |
1 x | Sanyo TX Battery Eneloop 9,6 V Futaba |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | 90 mm rods + T patellas set for direction control |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | 100 mm rods set for direction control |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
1 x | Pushrod octagone 3/2 |
1 x | 250 mm / 16 mm Airbrakes |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | 140 mm rods + T patellas set for direction control |
2 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | One touch canopy lock |
2 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Cable tie mounts 4.3 (4 uds) |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | SUS wire 3m (nylon coated) |
1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
2 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
1 x | Cockpit plastic closing |
1 x | Pushrod greyline 3/2 with coupler M2 |
1 x | Wheel collar 6 mm Ø (4 uds) |
2 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Wheel collar 5 mm Ø (4 uds) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | Cable grommet Ø 4 mm (4 uds) |
1 x | 45 mm rods + T patellas set for direction control |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Tip wing protector 30x10 (2 pcs) |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Covered closure or fairings |
2 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
1 x | Wheel collar 3.5 mm Ø (4 uds) |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
2 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Clip mini fixing for wing (2 pcs) |
1 x | Canopy Latch |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Pushrod greyline 3/2 with coupler M3 L: 1000 mm |
1 x | Screw-lock connector M2 (2 uds) |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Pushrod octagone 4/3 |
1 x | 100 mm rods + T patellas set for direction control |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | 80 mm rods set for direction control |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | Clip fixing for wing (2 pcs) |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
2 x | Allen wheel collar M4x4 |
2 x | Allen wheel collar M3x5 |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Electromagnets brake |
1 x | E_brakes electronics |
1 x | PYRO 600-11 |
1 x | KIRA 400-34 |
1 x | KIRA 400-39 5,2:1 |
1 x | KIRA 480-38 5,2:1 |
1 x | Adapter SPEED 480 whit axle short |
1 x | Kontronik Kosmik 30 cm Cable Kit |
1 x | MAMBO 17 |
1 x | KIRA 600-22 6,7:1 |
1 x | Adapter SPEED 500/600 |
1 x | Adapter FUN 400/480 |
1 x | KIRA 600-38 6,7:1 |
1 x | KIRA 600-20 |
1 x | DRIVE 510 (KIRA 480-34 5,2:1 + Koby 55 LV) |
1 x | Kontronik connector (10 connectors, 5 pairs) |
1 x | KIRA 500-36 6,7:1 |
1 x | PYRO 600-12 |
1 x | Adapter SPEED 480 |
1 x | KIRA 500-30 6,7:1 |
1 x | KIRA 600-30 6,7:1 |
1 x | Grasa 2 ml |
1 x | KIRA 480-43 |
1 x | KIRA 480-26 5,2:1 |
1 x | KONDOR 15-92 |
1 x | KIRA 600-16 |
1 x | KIRA 480-43 5,2:1 |
|
17,717.68EUR |