3 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | Balsa panel 4.0x100x1000 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | Balsa panel 3.0x100x1000 mm |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | Balsa panel 6.0x100x1000 mm |
1 x | A/C quality beech plywood 600x300x1.5 mm |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | BALSA triangular 10x10x1000 mm |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
1 x | Balsa panel 10x100x1000 mm |
1 x | Balsa panel 1.5x100x1000 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Long pinned hinge (12 uds) |
2 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | 18 mm reinforced hinge |
2 x | Gates hinge 30x16 mm (2 pcs) |
1 x | 15 mm reinforced hinge |
2 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
2 x | Gates hinge aluminium (1 pcs) |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
2 x | Large flex hinge (12 uds) |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Miniature brass strap hinge, 1 m |
2 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | SIMtransmitter 6 Mode 2 |
1 x | Simulador RealFlight RF-9.5 S (sin emisora) |
2 x | GameCommander USB Universal |
1 x | EasyFLY Addon |
1 x | RF9 Flight Simulator with Spektrum Controller |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Monokote BLANCO jet (1.8x0.65m) |
1 x | 2,4x1000 mm 2:1 red termoretract tube |
2 x | Tape GFK 38 mm |
3 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
2 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Fiberglass heat shield Ø 4 mm 1000 mm |
1 x | Tape GFK 25 mm |
2 x | Protective Cover for wires Ø 15 mm 1000 mm |
2 x | Protective Cover for wires Ø 6 mm 1000 mm |
1 x | Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC |
1 x | 4,8x1000 mm 2:1 blue termoretract tube |
1 x | 4,8x1000 mm 2:1 red termoretract tube |
1 x | 100m servo "Premium" wire (white/red/blue) |
1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
1 x | Black spiral protective cover for wires Ø 0,5/50 mm - 25 m |
2 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
1 x | Conector JR Servo male (10 pcs) |
1 x | Connectors banna gold 5,5 mm (M/F) |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
2 x | Conector JR Servo male (50 pcs) |
2 x | Conector BEC female (10 pcs) |
1 x | 30 cm MULTIPLEX female connector |
1 x | Conector FUTABA Servo female (10 pcs) |
2 x | Banna gold connector 2,5 mm (M/F) |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | Adapter lead MPX/EC3 |
1 x | 5 LiPo XH>EH adapter |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | DPS Switch JR/JR |
1 x | CC 01 |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | BEC 3A FOXY |
1 x | Connector Sub-D 2+5 Male |
2 x | DPSI Ampere battery backer |
1 x | Connector Sub-D 2+5 Female |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | 30 cm BEC cable (female) |
1 x | Adapter lead MPX/XT60 |
1 x | CC 03 |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | Small Crow DLE-170M |
2 x | Silicone adhesive ELASTOSIL® E4, tube/ 90 ml |
1 x | Big Crow DLE-170M |
1 x | Propeller FALCON 32,5x11 PUSHER Carbono |
1 x | Plasti Dip Liquid Tape 429 ml orange |
1 x | Plasti Dip Liquid Tape 429 ml black |
2 x | 20 g tin paste |
1 x | Universal Colour Paste deep black 250 g |
3 x | Spray EC Red 400ml |
2 x | Silent-blocks DLE 170M |
1 x | Release wax 250ml |
1 x | Spray adhesive INFUTAC (Clear) 500 ml |
2 x | PARTALL® Hi-Temp Wax, 340 g |
2 x | Spray adhesive AEROFIX 2 |
2 x | Spray YELLOW Inca Lexan 150ml |
1 x | Universal Colour Paste deep black 50 g |
2 x | |
2 x | Universal Colour Paste white 50 g |
1 x | 1/6 Pilot "John" |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Pine wood slat 10x10x1000 mm |
1 x | Short ball link M3 (6 uds) |
1 x | M3 Maxi ball link (2 uds) |
1 x | Actuador lineal HLS12-100210-7.4v |
1 x | Small pinned hinge (12 uds) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Flap hinge (6 pcs) |
1 x | Pin hinge 39x20 mm (10 uds) |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | Small flex hinge (12 uds) |
1 x | Pin hinge 34x16 mm (10 uds) |
1 x | Suncover 100cc Red |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
1 x | Cinta Goldfix 1m |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | SE Ring 350 mm (2 pcs) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Green silicone 0,25 qmm wire (50 m) |
1 x | Fiberglass heat shield Ø 8 mm 1000 mm |
2 x | Jeemo Dolly |
1 x | JEEMO Kit ARF Basic (2 color) - XTRALIGHT |
1 x | Protective open Cover for wires Ø 13 mm 1000 mm |
1 x | Protective Cover for wires Ø 10 mm 1000 mm |
1 x | Cable Cargador FUTABA |
1 x | 50m servo "Premium" wire (white/red/blue) |
1 x | 20x1000 mm Ring Strap Back To Back |
1 x | SE Ring 360 mm (2 pcs) |
1 x | 10m servo "Premium" wire (white/red/blue) |
2 x | JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT |
1 x | SE Ring 330 mm (4 pcs) |
1 x | 6 mm Quick clamp_S (10 pcs) |
1 x | Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC |
1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
1 x | 1 m servo "Premium" wire (white/red/blue) |
1 x | EVP Unit for AXI2208/xx and 2212/xx |
1 x | Extension MPX-MPX 20 cm |
2 x | XH male balance (9S) connector (2 pcs) |
2 x | Bag connector 2 mm |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell |
1 x | AXI 2204 Multicopter |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
2 x | MR30 connector female |
1 x | Conector JR Servo female (50 pcs) |
2 x | XH male balance (6S) connector (2 pcs) |
1 x | Silicone red 2,5 qmm wire ( 1 m) |
1 x | Wing conexion 2 servos Futaba 50 cm |
1 x | PVC 0,08 qmm Graupner servos wire (5 m) |
1 x | XH female balance (8S) connector (2 pcs) |
1 x | MR30 connector male |
1 x | Soporte carbono MR30 (2 pcs) |
1 x | Conector FUTABA Servo male (10 pcs) |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
2 x | Split M1,2x10 (10 pcs) |
2 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
2 x | Giant Scale Muffler D.A. 70 |
3 x | Junta humo metalica G20 (DLE20/DLE20RA/DLE40) |
3 x | Compact Pitts Muffler OS MAX.35.40 FP |
1 x | ZEUS F3A 2m |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 3 cell |
3 x | Connectors MPX male (PIN double) |
1 x | Silicone black 2,5 qmm wire ( 1 m) |
1 x | Conector JR/Uni Servo male BLUE silicon (10 pcs) |
3 x | Connectors banna oro 3,5 mm (M/F) |
2 x | XH male balance (5S) connector (2 pcs) |
1 x | Motor 2212 (1000KV) Quadcopter F450 |
1 x | XH male balance (4S) connector (2 pcs) |
1 x | XH female balance (7S) connector (2 pcs) |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 2 cell |
1 x | XH female balance (3S) connector (2 pcs) |
1 x | XH male balance (3S) connector (2 pcs) |
1 x | Protector Connector Dean-T (1 pair) |
1 x | XH female balance (2S) connector (2 pcs) |
3 x | XH female balance (4S) connector (2 pcs) |
1 x | Conector FUTABA Servo female BLUE silicon (10 pcs) |
1 x | Conector FUTABA Servo male BLUE silicon (10 pcs) |
2 x | Wing connector 8pin with pin strip, plug & socket |
2 x | Conector JR Servo female (10 pcs) |
2 x | Connectors MPX black male |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
1 x | Extension 6 lipos XH > EH |
2 x | Male connector for 10 pines AWG |
1 x | CC 02 |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
2 x | Motor DLE 170 M- Paramotors |
2 x | Spray Graphit 33 |
1 x | Spannlack 1000 ml |
2 x | Lead with adhesive (2 pcs) |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Landing gear frontal support 25x32x16 |
1 x | Tip wing protector 30x10 (2 pcs) |
3 x | Turbina KINGTECH K70G4 |
3 x | Exhaust K45TP |
5 x | Turbina KINGTECH K320 G5 |
1 x | Scale exhaust K45TP |
4 x | Turbina KINGTECH K55G4 |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 20m |
4 x | FOD Screen K45/60/70/85 |
3 x | Battery LiFe -3000/25C-3S 9.9V |
1 x | Turbine KingTech K30G Restart |
2 x | KingTech K45TP G4 Turboprop |
2 x | FOD Screen K140G/K180G/K210G |
1 x | KingTech K100TP G4+ Turboprop |
2 x | Turbine KingTech K45G4+ |
2 x | Turbina KINGTECH K120 G4 |
1 x | Clamp K30 G3 |
2 x | Battery LiFe -2100/25C-3S 9.9V |
3 x | Bomba KP500V Kingtech |
2 x | Turbina KINGTECH K180 G4+ |
3 x | KingTech T-Modul 5 in 1 Telemetry |
2 x | Kerostarter K30G |
5 x | Turbine KINGTECH K160 G4 |
4 x | GSU Kingtech |
1 x | KingTech Turbineoil 1L |
2 x | Battery LiFe -3800/25C-3S 9.9V |
2 x | Burner Plug K30/ K45 |
2 x | KingTech Turbineoil 10L |
2 x | KingTech Turbineoil 5L |
3 x | Turbina KINGTECH K142 G4M |
1 x | VITAPROP CARBON FOLDING PROP 15x9.5" |
1 x | Fibra de vidrio 80 g/m² (5 m x 100 cm) |
1 x | Glass fabric 25 g (2 m²) |
1 x | Glass fabric 390 g/m² aero,10x1m |
3 x | Junta humo metalica G35 DLE35 |
2 x | Junta humo metalica G55 (DLE55/DLE111/DLE222) |
1 x | Glass fabric 280 g/m² (twill weave) 100 cm, roll 50 m |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 500mm |
1 x | Servo Connector Brackets (10 pcs) |
1 x | Conector XT-150 6mm (Set: 5 pares) |
1 x | Silicone red 0,25 mm² wire (25 m) |
2 x | 28x5 mm wires output (2 pcs) |
1 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | 290 mm 290 mm M5x18 mm shaft ship |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | White smoke bombs AX-60 (5 pcs) |
2 x | Junta humo metalica G30 (DLE30/DLE60) |
2 x | Junta humo metalica G61 (DLE55RA/DLE61/DLE120) |
2 x | O-ring Saito FG-73 5cyl |
1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
1 x | VBar Control Touch, midnight black |
1 x | Oracover light Grey 2m |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
1 x | MPX PCB "4 Pins", 5 pieces |
1 x | Kontronik connector (10 connectors, 5 pairs) |
1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
1 x | Three-position switched channel, short |
2 x | EWC3 40 cm wing connector |
1 x | wing/fuselage connector for 3 pines AWG 20-24 |
1 x | Combo lighting module with covering drop shape |
1 x | Propeller set 400 (2R+2L) |
1 x | Connectors banna oro 3 mm (M/F) |
1 x | XH male balance (7S) connector (2 pcs) |
1 x | ABS Strip 1.0x4.0x1000 mm |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | Tip wing protector 40x14 (2 pcs) |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | 261 mm M4/M4 6.0x4.0 mm shaft ship |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Split pin 1x8 mm (10 uds) |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | 290x4 mm M4 shaft ship |
1 x | Snap long M2 (10 uds) |
1 x | Kwik link unmount tool |
1 x | Pitts Muffler kit for CAP 21 |
2 x | Junta humo metalica G85 (DLE85/DLE170) |
1 x | Exhaust elbow for SAITO FA65/72/80/82a/91S/100/ |
1 x | Distanzstück motor OS 120 AX |
1 x | Spring clamp for tube Ø29 mm ext 1pc |
1 x | Spring Clip Ø25 mm |
1 x | VBar NEO VLink 6.x Express, neon-yellow |
1 x | Motor Scorpion HKIII 4035-560 Kv |
1 x | VTX 477 Carbon Rotorblade |
1 x | Logo 400 SE VBar |
1 x | VBar Control RX-Satellite |
1 x | Tail boom brace LOGO 480 |
1 x | Wings Bags JEEMO |
1 x | Oracover Black 10 m |
1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
1 x | Oracover GREY Seafire Sea 2m |
1 x | Propeller POWER-PROP 14x9 |
1 x | XT-30 connector (pair) |
1 x | Connectors MPX female (PIN double) |
1 x | Motor brushless 1806 - 2300 Kv Cuadracopter |
2 x | MPX Support (2 pcs) |
1 x | XH male balance (2S) connector (2 pcs) |
1 x | PIN Connector female (100 pcs) |
1 x | Connectors banna oro 8,0 mm (M/F) |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | Wing conexion 2 servos JR/Graupner 50 cm |
1 x | Conector Servo female 4 pines |
1 x | Gold antispark 4 mm plug |
1 x | Red 3m5 mm connector holder |
1 x | Connectors DEANS 4 pins (1 pair) |
1 x | Male connector for 20 pines AWG |
1 x | Male connector JST SH 1.0mm with 10 cm wire |
1 x | SPARK Switch 12v |
1 x | Female connector for 16 pines AWG |
1 x | Female connector JST SH 1.0mm with 10 cm wire |
1 x | Female connector for 20 pines AWG |
1 x | ABS tube 3.0x1.0x1000 mm |
2 x | Scale exhaust K100TP |
1 x | Allen wheel collar M4x6 |
1 x | 2 mm Prop Adapter M5 |
1 x | Plasti Dip Liquid Tape 429 ml black |
3 x | Turbina KINGTECH K65 G4+ |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
1 x | Battery LiFe -1450/25C-3S 9.9V |
1 x | Filter KingTech |
1 x | Turbine KINGTECH K85 G4 |
1 x | Turbine KINGTECH K100 G4 |
|
118,731.58EUR |