Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA85080

16.00EUR

EWC3 40 cm wing connector
[EMCA85080]

EWC3 40 cm wing connector

The ingenious plug system for R/C modelling!
- reverse polarity protected
- high current qualified (up to 12A per contact)
- 100% safe connection because of locking
- small construction form due to 2,54 mm contact spacing
- easy mounting due to packaging
- strong high flexible cable with 0.34mm² (AWG22) cross section
- single connector version for up to two servos

The EWC (EMCOTEC wing connector) is a new plug system for R/C modelling. High value plugs "made in Germany" with a resistance of <20mOhm quarantee best contact safety. The crimp contacts are locked twice and reach best tensile force. The cable plug engages with the multipole connector on the PCB. So it's protected against accidental release for example due to vibrations.

The servo connection cable will be soldered directly to the PCB. Also 2 cables (one above one below) can be soldered, that results a kind of a v-cable. The servo cable can be fixed with a cable tie and a shrinking hose on the PCB if required. The complete PCB with the multipole connector can be fixed in the wing root of the model.

The counterpart (connector socket) is equipped with a strong 0.34mm² servo cable. The cable goes to the receiver or to the servo connector of a dual power supply.

Delivery includes EWC set consisting of EWC PCB with mounted plug, cable ties and shrinking hose, EWC connection cable (JR) 40cm (15.75in) with lockable counterpart connector socket.

temporarily out of stock

Reviews

Customers who bought this product also purchased

Spinner 159x200 mm GFK temporarily out of stock	DUPLEX 2.4EX MU 3 Sensor temporarily out of stock	Quick hose connector 4-4 mm temporarily out of stock
Cockpit aluminium closing temporarily out of stock	Conector JR/Uni Servo male BLUE silicon (10 pcs) temporarily out of stock	Blue aluminium servo arm V2-Hitec 1,0 inch M3 temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Combo KAVAN C3536-1250 + KAVANA R50SB +
59.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	140 mm rods set for direction control
1 x	80 mm rods set for direction control
1 x	Clip mini fixing for wing (2 pcs)
3 x	Cable grommet Ø 4 mm (4 uds)
1 x	45 mm rods set for direction control
1 x	Cable grommet 9.5 mm (4 uds)
1 x	Allen wheel collar M4x6
3 x	Cabin latch Fox MDM1 4m (pair)
1 x	100 mm rods + T patellas set for direction control
1 x	100 mm rods set for direction control
1 x	28x5 mm wires output (2 pcs)
1 x	11 mm Rubber pads (14 pcs)
1 x	38x4,5 mm wires output (2 pcs)
2 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
2 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	90 mm rods + T patellas set for direction control
1 x	Aluminun wheel collar 4 mm Ø (4 uds)
1 x	250 mm / 16 mm Airbrakes
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Clip fixing for wing (2 pcs)
2 x	41x5,5 mm wires output (2 pcs)
1 x	140 mm rods + T patellas set for direction control
3 x	Allen wheel collar M3x5
1 x	Aluminun wheel collar 2.5 mm Ø (4 uds)
3 x	Canopy Latch
2 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	Adapter lead MPX/XT60
1 x	JETImodel SINGLE BEC
1 x	CC 05
1 x	Cockpit plastic closing
2 x	30 cm BEC cable (female)
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
2 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Screw-lock connector Ø 2 mm (2 uds)
2 x	CC 03
2 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
2 x	CC 01
2 x	30 cm BEC cable (male)
1 x	5 LiPo XH>EH adapter
2 x	Dean "T" - Futaba Adapter
1 x	Adapter lead MPX/EC3
1 x	USB HLS prog. interface
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
2 x	2 LiPo XH>EH adapter
3 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
2 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	Cabel charger transmitter GRAUPNER
2 x	3 LiPo XH>EH adapter
1 x	Aluminium alloy coupler for carbon tube 6/M4
2 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	Screw-lock connector M2 (2 uds)
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	SUS wire 3m (nylon coated)
2 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Covered closure or fairings
1 x	TrainerCord (master-learner)
2 x	Steering arm 16 mm Ø 3 mm
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
3 x	Steering arm 12 mm Ø 4 mm
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Steering arm 16 mm Ø 4 mm
2 x	Stainless steel cable Ø 0.5 mm (2 m)
1 x	Locking cable tie 3.2x142 (uds)
2 x	TP/TopFuel - XH 2/3S Adapter
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	4 LiPo XH>EH adapter
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Locking cable tie 2.5x100 (uds)
1 x	Snap pin for micro clevis (10 uds)
1 x	Snap long M2 (10 uds)
3 x	Tip wing protector 30x10 (2 pcs)
1 x	Lead with adhesive (2 pcs)
1 x	Control for forward wheel (MINI)
1 x	Tip wing protector 40x14 (2 pcs)
1 x	Cable grommet Ø 5 mm (4 uds)
2 x	Mahogany wood slat 1.5x1.5x1000 mm
2 x	Beech dowels 2.0 x 1000 mm
3 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Pine wood slat 3.0x7.0x1000 mm
2 x	Liston HAYA 10 x 10 x 1000 mm
1 x	BALSA trip 8.0x8.0x1000 mm
3 x	Pine wood slat 3.0x5.0x1000 mm
1 x	Walnut wood slat 3.0x3.0x1000 mm
3 x	Linden wood slat 2.0x2.0x1000 mm
3 x	BALSA trip 5.0x5.0x1000 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
2 x	Pine wood slat 5.0x5.0x1000 mm
2 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
3 x	BALSA trip 10x10x1000 mm
2 x	Pine wood slat 10x10x1000 mm
1 x	Beech dowels 3.0 x 1000 mm
3 x	Beech dowels 10 mm x 1000 mm
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Horn with ball 40x30
2 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Horn 5/10 with M2 Bearing
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	6 mm blue aluminium threaded horn with patella
1 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	RH long aluminium horn (2pcs)
1 x	6 mm red aluminium threaded horn with patella
1 x	Horn for flap control (1 pcs)
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Horn 20x28,5 mm (2 pcs)
1 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	Cable control set
1 x	Horn 6/35 with M3 Bearing
1 x	Horn with ball 55x40
1 x	Small aluminium horn gold (2pcs)
1 x	Brass control horn M3 short for wire (2 pcs)
1 x	Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
1 x	Straightened rod Ø 1.5 mm x 1500 mm
2 x	Landing gear frontal support 25x32x16
1 x	1/10 Pilot "Jimmy"
1 x	1/6 Pilot "Cindy"
1 x	Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs)
1 x	Profile ABS Square 4 x 1000 mm
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
1 x	Selfstart electronic switch
1 x	JETImodel Addcap 1640
1 x	Cockpit aluminium closing
1 x	DPSI Ampere battery backer
1 x	PSC 6
1 x	Connector CAN 15
1 x	Support Flush MPX Conector (6 pcs)
2 x	Connector Sub-D 2+5 Female
1 x	Support pump Xicoy X45
1 x	Soporte grifo FESTO (2 pcs)
1 x	DPS Switch JR/JR
1 x	Wheel collar 4 mm Ø (4 uds)
1 x	Wheel collar 5 mm Ø (4 uds)
1 x	STEERING FRONT WHEEL SYSTEM BIDULE 111
1 x	Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod M2,0 (2 uds) 250mm
1 x	Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled
1 x	Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled
1 x	BALSA triangular 6x6x1000 mm
1 x	BALSA triangular 15x15x1000 mm
1 x	Adapter 3,0 mm M8
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
2 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	One touch canopy lock
1 x	Snap for floding prop for 2 mm axi
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Pushrod octagone 4/3 with coupler M3
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	Aluminun wheel collar 6 mm Ø (4 uds)
2 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Carbon plate 350x150x3.0 mm
1 x	Split pin 1x8 mm (10 uds)
1 x	quality beech plywood BIRCH 600x300x2.0 mm
1 x	Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs)
2 x	Cable grommet Ø 3.2 mm (4 uds)
1 x	Pushrod octagone 3/2
2 x	BALSA triangular 8x8x1000 mm
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	Pushrod greyline 3/2 with coupler M2
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Lite Plywood panel 600x300x2.0 mm
2 x	BALSA triangular 10x10x1000 mm
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	Allen wheel collar M3x3
1 x	Wheel collar 3.5 mm Ø (4 uds)
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	BALSA leading edge 8x10x1000 mm
1 x	Lite Plywood panel 600x300x3.0 mm
1 x	Plywood sheet BEECH 600 x 300 x 2,0 mm
1 x	Birch plywood plate 600x300x3.0 mm
1 x	Extra long horn 60x30
1 x	Brass control horn M4 long for wire (4 pcs)
1 x	Horn micro type4 Ø 0,5 (2 pcs)
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch
1 x	Rudder forward 80x28 "type Kato"
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm
1 x	Horn mando long (2 pcs)
1 x	Long horn 50x26
1 x	Propeller POWER-PROP 10x6
1 x	Porpeller HUNTER 400
1 x	Extension 2/3 lipos JST/C
1 x	TURBINATOR 2 BLUE AND YELLOW 1778 mm Combo
1 x	F9F COUGAR Grey ARF 1.562 mm
1 x	Propeller POWER-PROP 14x12
1 x	Porpeller HUNTER 480
1 x	Propeller POWER-PROP 13x10
1 x	Propeller electric carbon 7x7
1 x	Propeller POWER-PROP 13x9
1 x	Male connector for 6 pines AWG
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	CC 02
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	USB interface ALTIS
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	Male/Female prolonguer for Balancer Thunder Power 6S
1 x	Circlick securite
1 x	PSC 5
1 x	Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	Extension 5 lipos JST - JST/C
1 x	Prolonguer for Balancer Thunder Power 6S
1 x	Male connector JST SH 1.0mm with 10 cm wire
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)

4,289.72EUR