1 x | ABS tube 4.0x2.0x1000 mm |
2 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
1 x | ABS tube 7.0x6.0x1000 mm |
1 x | ABS tube 5.0x3.0x1000 mm |
1 x | ABS tube 3.0x2.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | ABS tube 14.0x10.0x1000 mm |
2 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
1 x | ABS tube 6.0x5.0x1000 mm |
1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
2 x | Xplorer3 anemometro |
2 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
1 x | ABS tube 10.0x8.0x1000 mm |
1 x | Xplorer4 anemometro |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | ABS tube 5.0x4.0x156 mm |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | ABS tube 2.0x1.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
1 x | Xplorer1 anemometro |
2 x | Xplorer2 anemometro |
1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
1 x | ABS tube 5.0x4.0x1000 mm |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Cockpit plastic closing |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Steering arm 12 mm Ø 4 mm |
2 x | Hovercraft sailcloth |
1 x | |
1 x | Propeller balancer |
1 x | BALSA triangular 15x15x1000 mm |
3 x | BALSA trip 3.0x5.0x1000 mm |
2 x | Pine wood slat 2.0x2.0x1000 mm |
2 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Truck-trailer for gliders 720 x 239 mm |
2 x | Beech dowels 10 mm x 1000 mm |
2 x | Pine wood slat 2.0x10.0x1000 mm |
2 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Surface Indicator Gauge Small |
2 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | Angle of incidence meter |
1 x | Beech dowels 2.0 x 1000 mm |
2 x | BALSA trip 3.0x3.0x1000 mm |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | BALSA triangular 10x10x1000 mm |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
2 x | BALSA trip 4.0x4.0x1000 mm |
2 x | BALSA triangular 6x6x1000 mm |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Medidor ángulos y/o incidencias |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Beech dowels 4.0 x 1000 mm |
4 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Blue metalic ball link M2/2 azul (2 pcs) |
1 x | Piloto jet 130 mm |
1 x | Glases Flitemaster |
1 x | 6,4x1000 mm 2:1 blue termoretract tube |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
2 x | 3 mm Long Prop Adapter M5 |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
2 x | Adapter 2,3 mm M5 for spinner 30 mm fixed propeller |
2 x | Actuador lineal HLS12-100210-7.4v |
3 x | 2,3 mm Prop Drive Günther M4 |
3 x | 5 mm Prop Adapter M6 |
1 x | Angle support XT60 conector |
1 x | Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
1 x | Birch plywood plate 600x300x4.0 mm |
2 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
2 x | DYNAMOMETER S-1580 |
1 x | TX 250 mW especial GOPRO |
1 x | Carbon plate 350x150x3.0 mm |
1 x | Swashplate metal LAMA |
1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
2 x | Carbon fiber rod 1.0 mm x 1000 mm |
1 x | Carbon fiber rod 14 mmx1000 mm |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
2 x | Carbon fiber rod 4.0 mmx1000 mm |
1 x | Servo NARO Max Std |
3 x | Linden wood slat 2.0x2.0x1000 mm |
2 x | Pine wood slat 10x10x1000 mm |
1 x | 120x60 mm SLH KOVO wheel |
1 x | quality beech plywood BIRCH 600x300x2.0 mm |
2 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | Balsa panel 10x100x1000 mm |
1 x | Allen wheel collar M4x4 |
2 x | Hexagonal Nut M4 (20 pcs) |
2 x | Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6 |
1 x | Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs) |
1 x | Adapter 4,0 mm M8 |
1 x | Pin 2,5 to cable coupler M2,5 ⌀ pin 2,5 (6 pcs) |
1 x | Micro control horn T2 Ø 1 |
1 x | Nylon threaded block M6 (2 uds) |
1 x | Motor holder for AC 28/7 |
1 x | Pan Head Screw M1,6x8 (10 pcs) |
1 x | Nylon Screw M5x30 |
2 x | Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
2 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
2 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | 2 mm Prop Adapter M5 |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
1 x | Horn mando small (2 pcs) |
1 x | 2,3 mm Prop Adapter M5 |
1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
1 x | Adapter 4,0 mm M6 |
1 x | Adapter 5,0 mm M8 |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Adapter 3,2 mm M5 for spinner 30 mm fixed propeller |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
2 x | 3 mm Short Prop Adapter M5 |
1 x | Adapter 3,2 mm M6 for spinner 40 mm fixed propeller |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | 4 mm Prop Adapter M6 |
2 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
1 x | Adapter 5,0 mm M6 for spinner 40 mm fixed propeller |
1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
1 x | Adapter 3,0 mm M6 |
2 x | Hexagonal Nut M4 (10 pcs) |
1 x | Adapter 3,0 mm M6 for spinner 40 mm fixed propeller |
1 x | Allen wheel collar M3x5 |
1 x | 12 mm dogdrive props |
1 x | Adapter 3,2 mm M8 |
1 x | Hexagonal Nut M1 (10 pcs) |
2 x | Allen wheel collar M3x3 |
2 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
2 x | Hexagonal Nut M2.5 (10 pcs) |
2 x | Hexagonal Nut M2 (10 pcs) |
1 x | |
1 x | Landing gear axle Ø 4 mm (2 uds) |
1 x | Nylon gear block Ø 6 mm (2 uds) |
1 x | Nut for mounting M2,5 (4 pcs) |
1 x | Pin 3,0 to cable coupler M3,0 ⌀ (6 pcs) |
1 x | Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs) |
1 x | Pin to cable coupler M1,6 ⌀ (6 pcs) |
1 x | Pan head screw M2x16 PH |
2 x | Nylon gear block Ø 5 mm (2 uds) |
1 x | Nylon threaded block M4 (2 uds) |
1 x | Micro flex hinge (12 uds) |
1 x | Pan Head Screw M2x8 PH countersunk head |
2 x | M3/5Diam metal ball link V3 (2 pcs) |
1 x | Nut for mounting M3 (10 pcs) |
1 x | Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs) |
1 x | Nut for mounting M6 (4 pcs) |
1 x | Nylon gear block Ø 3 mm (2 uds) |
1 x | Pan Head Screw M1,6x6 (10 pcs) |
1 x | Ø 2 mm pin for Kwik link MPJ2162/2163 (6 pcs) |
1 x | Nut for mounting M3 (4 pcs) |
1 x | Nut for mounting M2 (4 pcs) |
1 x | BLUE Colored Liquid smoke for turbine 0.75 l |
1 x | Aluminium Hub "Z" for folding Props 30 mm M8 Shaft 5 mm |
2 x | Squared carbon wing joinner 5x5x220 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs |
2 x | Carbon fiber rod 3.0 mm x 1000 mm |
1 x | |
1 x | ABS tube 3.0x2.0x330 mm |
1 x | CA Glue (medium) 20g |
1 x | |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Buy Perforated film 100 cm / 10 m |
1 x | Carbon fiber rod 2.0 mmx1000 mm |
1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
1 x | Buy Perforated film 100 cm / 50 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | Porpeller HUNTER 480 |
1 x | Propeller POWER-PROP 11x8 |
1 x | Propeller POWER-PROP 12x9 |
1 x | Propeller POWER-PROP 13x10 |
1 x | LASER 73" 1.85m (05) PILOT |
1 x | ESC KAVAN R-80SB SBEC 80A |
1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | Battery LiPo GENS 5000 mAh 6S 22.2v 45C (Gens Ace) |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | Axle for AXI 5325/xx motors |
2 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
2 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | GM Propellers Spinner Scale ø 42mm Diameter, Motor shaft ø 6mm C |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | Carbon fiber rod 16 mm x 1000 mm |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Optical RPM Sensor |
1 x | Battery LiPo GENS 5500 mAh 6S 22.2v 45C (Gens Ace) |
1 x | Battery LiPo GENS 5000 mAh 2S 7.4V 60C (Gens Ace) |
1 x | Battery LiPo GENS 4400 mAh 7S 25.9v 35C (Gens Ace) |
1 x | Battery LiPo GENS 160 mAh 2S 7.4V 30C (Gens Ace) |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | BALSA trip 10x10x1000 mm |
1 x | 3.2 mm Prop Adapter M6 |
1 x | Pinion 15 teeth (3:1) 2,3 mm axi diameter |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | Spinner Alumin. propeller pleg. 40 mm / 4,0 mm |
2 x | Lock washer 3.2 mm (20 pcs) |
1 x | Excentric gearbox for 2,3mm axis (2,33:1) |
1 x | Excentric gearbox for 2,0mm axis (4,5:1) |
2 x | Locking cable tie 3.2x142 (uds) |
1 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
2 x | Couple M4 for wire (10 pcs) |
1 x | M2,5 5Diam black ball link V2 (2 pcs) |
1 x | Plastic wheels 30 mm (2 pcs) |
1 x | Screw M3x30 (10 pcs) |
3 x | Fuel line plug Small 2 pcs |
1 x | Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6 |
1 x | Cable tie mounts 4.3 (4 uds) |
1 x | Axle for AXI 28269/xx motors |
1 x | Bearing ZZ 6x16x5 for AXI 5330/xx |
1 x | Combo FOXY C3530-700 + FOXY 80 amp |
1 x | Bearing MR63 ZZ for AXI 2203/40 VVP |
1 x | Combo FOXY C3530-570 + FOXY 80 amp |
1 x | Split pin 1.6x16 mm (10 uds) |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | Black large kwik link (10 pcs) |
3 x | COMPACT drive 26/45-20 DL=175 motor |
2 x | Lock nut M5 (20 pcs) |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Control horn long w/ball |
2 x | M2,5 5Diam short black ball link V2 (2 pcs) |
1 x | M2,5 Diam metal ball link V3 (2 pcs) |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Ball link M1.6 (6 uds) |
1 x | M3/5 Diam metal short ball link V3 (2 pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
1 x | Turnbuckle M2,5x27/43 (2pcs) |
1 x | Turnbuckle M1,6x20/30 (2pcs) |
1 x | Socket Head Screw M2,5x12 |
1 x | Socket Head Screw M2x10 |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
1 x | Kwik link aluminio M3 L:30mm (6 uds) pinØ1.6mm Left |
1 x | Split pin 1x8 mm (10 uds) |
1 x | Pinion 11 - 3,2 mm |
1 x | Lock nut M2.5 (10 pcs) |
1 x | Spinner propeller pleg. 40 mm / 4,0 mm |
2 x | Excentric gearbox for 2,3mm axis (3,5:1) |
1 x | Lock nut M2 (20 pcs) |
1 x | Spinner propeller pleg. 30 mm / 3,2 mm |
1 x | Spinner negro 40 mm |
1 x | Excentric gearbox for 3,2mm axis (3,5:1) |
1 x | 6 mm Prop Adapter M8 |
1 x | Spinner propeller pleg. 30 mm / 2,3 mm |
2 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
2 x | Lock nut M2 (10 pcs) |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | Long pinned hinge (12 uds) |
1 x | Landing gear axle Ø 5 mm (2 uds) |
1 x | Lock washer 2.7 mm (20 pcs) |
1 x | Spinner propeller pleg. 40 mm / 3,2 mm |
1 x | Landing gear strap large (4 uds) |
2 x | Flat washer 2.2 mm (20 pcs) |
1 x | Adapter 3,0 mm M5 for spinner 30 mm fixed propeller |
1 x | Flat washer 1.7 mm (20 pcs) |
1 x | Large flex hinge (12 uds) |
1 x | Spinner Alumin. fixed propeller 30 mm / 3,0 mm |
1 x | Hexagonal Nut M1,6 (10 pcs) |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Long ball link M2 (6 uds) |
1 x | Long ball link M1.6 (6 uds) |
1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | M2 5Diam short black ball link V2 (2 pcs) |
1 x | Cockpit latch closing I=10 mm |
1 x | Horn mando long (2 pcs) |
1 x | Flat washer 2.7 mm (20 uds)pcs) |
1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | 3,2 mm Prop Adapter M5 |
1 x | Excentric gearbox for 2,0mm axis (5,0:1) |
1 x | Spinner propeller pleg. 30mm axle 3,0 mm |
1 x | Lock washer 2.2 mm (20 pcs) |
1 x | Flat washer 4.3 mm (20 pcs) |
1 x | Spinner propeller pleg. 40 mm / 3,2 mm |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
1 x | Fuel line plug Large 2 pcs |
1 x | Spinner propeller pleg. 40 mm / 3,2 mm |
2 x | M2 5Diam black ball link V2 (2 pcs) |
1 x | Pushrod octagone 3/2 with coupler M2 |
1 x | Screw M3x5 (10 pcs) |
1 x | Screw M2.5x20 (10 pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
1 x | Quicklock washer 3.5 mm (10 pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
1 x | Pushrod octagone 3/2 |
|
7,814.67EUR |