Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » Zenoah/ZG » TC7783

159.99EUR

Conversion ignition ZG45/62 CDi
[TC7783]

PCI-HV ignition conversion set with Zenoah rubber plug cap for ZG 45/62

The Falcon PCI-HV 1.3 and PCI-HV 2.3 are microprocessor controlled battery ignition systems, professionally developed to the highest possible standard of quality. These two units are electronically as robust as the legendary Zenoah magneto ignition. If you do not exceed the maximum voltage supply the only possible damage you can possibly experience is mechanical.

A clear advantage with the battery ignition is that the tickover speed is a great deal lower than with a magneto ignition. The engine will start just as easily as with the Easy-Start-System, with the added advantage you do not need to carry the start box and plug it in.

Not including the battery, and comparing the battery ignition engines with the magneto engines with screened ignition cable and Bosch screened plug cap, there is a weight reduction of 220 grams on the ZG 45PCI-HV, the ZG?62PCI-HV and also on the ZG 80PCI-HV twin cylinder.

The conversion set includes special tools and a manual with photo?s giving step by step instructions. The conversion from magneto to electronic battery ignition is very simple and can be carried out with ease. The sensor is only screwed into place and is automatically adjusted. The same propeller hubs as with the magneto ignition are used.

The PCI-HV ignition contains a very efficient voltage converter, which is capable of using the higher voltage instead of converting it to heat, as in the case of the common linear voltage regulators. With the PCI-HV ignition the rule is: the higher the voltage, the lower the current. Therefor it is best to use a 2s LiPo directly, without an external regulator, the flying time will be the longest. Beside the 2s LiPo battery, there are quite a few other options for an suitable ignition battery. This can be a two cell A123 or LiFePO4 battery - a very good choice, if you intent to leave the battery in the model when charging. Also a 5 or 6 cell Sanyo Enerloop 2000 NiMH can be used. Be warned, that if you go for a 4 cell NiCd or NiMH type, this has to be one with a low internal resistance. When the voltage drops below 4.8 V, especially the boxer engine will start to misfire. This will happen quiet soon, when the batteries internal resistance is high, as it is often the case with NiMH batteries. A 2s LiPo is first choice for best capacity to weight ratio.

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

Regulador Hobbywing Platinum 260A HV SBEC V5
520.00EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

1 x	Perfil de ABS de media caña 3x1000 mm
2 x	Perfil de ABS "T" 8.0x8.0x1000 mm
2 x	Perfil de ABS de media caña 5,0x1000 mm
1 x	Conector ABS "CRUZ" 4.0 mm x 1000 mm
2 x	Perfil de ABS cuadrado 3 x 1000 mm
2 x	Perfil de ABS rectangular 10x5,0x1000 mm
1 x	Perfil goma 10-2 mm 2M
2 x	Conector ABS "L" 1.5 mm x 1000 mm
2 x	Perfil de ABS cuadrado 4 x 1000 mm
3 x	Perfil de ABS "L" 1.5x1.5x1000 mm
1 x	Perfil de ABS triangular 6.0x1000 mm 90º
3 x	Perfil de ABS "T" 2.0x2.0x1000 mm
2 x	Conector ABS "L" 1.0 mm x 1000 mm
3 x	Perfil de ABS cuadrado 2 x 1000 mm
2 x	Perfil de ABS de media caña 6,0x1000 mm
3 x	Perfil de ABS cuadrado 1 x 1000 mm
1 x	Conector ABS "L" 4.0 mm x 1000 mm
3 x	Perfil de ABS "T" 6.0x6.0x1000 mm
1 x	Perfil de ABS triangular 2.0x1000 mm 90º
2 x	Perfil de ABS de media caña 2,5x1000 mm
3 x	Perfil de ABS "L" 5,0x5,0x1000 mm
3 x	Perfil de ABS "T" 10.0x10.0x1000 mm
2 x	Conector ABS "H" 4.0 mm x 1000 mm
1 x	Perfil de ABS de media caña 7,0x1000 mm
1 x	Perfil de ABS de media caña 4x1000 mm
1 x	Perfil de ABS triangular 4.0x1000 mm 60º
1 x	Perfil de ABS triangular 4.0x1000 mm 90º
1 x	Perfil goma 8-2 mm 2M
3 x	Perfil de ABS "L" 3,0x3,0x1000 mm
2 x	Perfil de ABS "T" 4.0x4.0x1000 mm
2 x	Perfil de ABS de media caña 4x2.5x1000 mm
1 x	Perfil de ABS "L" 10,0x10,0x1000 mm
1 x	Arandela conica ancha alumino M3 azul (4 pcs)
1 x	Arandela conica alumino M4 rojo (8 pcs)
2 x	Arandela dentada 3.2 mm (20 pcs)
1 x	Arandela de bloqueo 2 mm (10 pcs)
1 x	Arandela conica alumino M3 negro (8 pcs)
1 x	Arandela dentada 2.2 mm (20 pcs)
1 x	Arandela abierta 4.1 mm (20 pcs)
1 x	Arandela de bloqueo 2.5 mm (10 pcs)
1 x	Arandela 1.7 mm (20 pcs)
1 x	Arandela abierta 2.1 mm (20 pcs)
1 x	Arandela conica alumino M4 azul (8 pcs)
2 x	Arandela conica ancha alumino M4 Negro (4 pcs)
1 x	Arandela de bloqueo 4 mm (10 pcs)
1 x	Arandela 2.2 mm (20 pcs)
1 x	Arandela 2.7 mm (20 pcs)
1 x	Arandela dentada 4.3 mm (20 pcs)
1 x	Circlick para eje 1.5 mm (10 pcs)
1 x	Arandela M3 negra (4 pcs)
2 x	Arandela conica alumino M3 azul (8 pcs)
3 x	Circlick para eje 1.2 mm (10 pcs)
1 x	Arandela 4.3 mm (20 pcs)
2 x	Arandela conica ancha alumino M4 Oro (4 pcs)
2 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	Varilla latón Ø 1,0 mm x 1000 mm
1 x	Cinta carbono TeXtreme 38 g/m2 IM UD 20mm x 100 m
2 x	Varilla acero Ø 2,0 mm x 1000 mm
1 x	Cinta Roving carbono 20m
1 x	Varilla acero Ø 0,8 mm x 1000 mm
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Fibra carbono tela 160g/m2 100 cm x 3 m
1 x	Varilla latón Ø 0,8 mm x 1000 mm
1 x	Cinta de sellado al vacío, 2,5 x 12 mm (hasta 140 ° C) 15 m
1 x	AIREX® M060 lámina (amarilla) 1200x550x2,0 mm (20 pcs)
1 x	Cinta de sellado al vacío, 2,5 x 12 mm (hasta 140 ° C) 22 rollos
1 x	Varilla acero Ø 1,0 mm x 1000 mm
1 x	Varilla acero Ø 8,0 mm x 1000 mm
2 x	AIREX® M060 lámina (amarilla) 1200x550x6,0 mm (5 pcs)
1 x	Cinta fibra carbono 25 mm 3k 125 g/m2 x 50m
2 x	AIREX® M060 lámina (amarilla) 1200x550x2,0 mm (10 pcs)
1 x	Fibra carbono tela 160g/m2 100 cm x 25 m
1 x	Varilla latón Ø 0,5 mm x 1000 mm
1 x	Varilla acero Ø 1,5 mm x 1500 mm
1 x	Varilla acero roscada M2 - 1m
1 x	Cinta fibra de vidrio 225g / m² (Silane, liso) 40 mm, 50m
1 x	Cuña desmoldeo roja (5 pcs) [40x20mm]
3 x	Varilla latón hexagonal Ø 4 mm x 1000 mm
1 x	AIREX® M060 lámina (amarilla) 1200x550x4,0 mm (5 pcs)
1 x	ARAMID panel nido de abeja 1300x2600x2 mm
2 x	Cinta fibra de vidrio 225g / m² (Silane, liso) 40 mm, 100m
1 x	Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x	Varilla acero Ø 3,0 mm x 1000 mm
1 x	Motor DLE 200cc Premium Muffler
2 x	Cinta autoadhesiva 10 mm x 12m; Diente 0.5 mm
1 x	Cinta SURFACE 21mm x 5m
3 x	Sistema cierre 480 mm con abrazadera (2 pcs)
1 x	Sistema cierre 350 mm con abrazadera (2 pcs)
1 x	Cinta fibra vidrio 50 mm
1 x	Perfil de ABS "L" 6,0x6,0x1000 mm
1 x	Cinta autoadhesiva 26 mm x 16.80m; Diente 1.0 mm
2 x	Sistema cierre baterías 20x200 mm
1 x	Sistema cierre 240 mm con abrazadera (2 pcs)
1 x	Cinta autoadhesiva 5 mm x 16.80m; Diente 0.5 mm
3 x	Soporte para bridas de hasta 3 mm (10 pcs)
1 x	Cinta autoadhesiva 20 mm x 12m; Diente 1.0 mm
1 x	Cinta tubuladora (5 m)
1 x	Canal de ABS de 8,0x4,0x1000 mm
1 x	Sistema cierre 450 mm con abrazadera (2 pcs)
1 x	Sistema cierre Mini 14x60 mm (4 pcs)
1 x	Cinta autoadhesiva 13 mm x 16.80m; Diente 1.0 mm
2 x	Sistema cierre HACKER 300 mm con abrazadera (2 pcs)
1 x	Canal de ABS de 1,0x2,0x1000 mm
1 x	Sistema cierre 360 mm con abrazadera (2 pcs)
1 x	Perfil Acero Inox. 14.5x9.6x1000 mm
2 x	Cinta fibra vidrio 25 mm
1 x	Perfil Acero Inox. 19.5x9.8x1000 mm
1 x	Perfil de ABS "L" 2,0x2,0x1000 mm
2 x	Cinta alerones 1m x 10mm
2 x	Sistema cierre negro doble cara 20x1000 mm
2 x	Sistema cierre 320 mm largo (5 pcs)
1 x	Conector ABS "T" 4.0 mm x 1000 mm
1 x	Sistema cierre 300 mm con abrazadera (2 pcs)
1 x	Canal de ABS de 5,0x10,0x1000 mm
1 x	Sistema cierre 250 mm con abrazadera (2 pcs)
2 x	Perfil Acero Inox. 7.5x4.5x1000 mm
1 x	Sistema cierre 400 mm con abrazadera (2 pcs)
1 x	Gafas Nimbus
1 x	Gafas Zurich Sport Sunglasse Dark Sensity BROWN
1 x	Gafas Moritz
2 x	Gafas Stratus
1 x	Gafas Ace
2 x	Gafas Nimbus "Black"
2 x	Gafas Aspen
1 x	Bayoneta aluminio ø30×1 mm x 1m
2 x	Perfil de ABS "L" 4,0x4,0x1000 mm
1 x	Pasta universal color Jet Black 50 g
1 x	Perfil goma 6-2 mm 2M
2 x	Tornillo M2x16 PH
2 x	Arandela de bloqueo 1 mm (10 pcs)
1 x	Arandela conica alumino M3 rojo (8 pcs)
1 x	Tuerca para insertar hexagonal M4 Br (4 pcs)
1 x	Tuerca para montaje M2 (4 pcs)
1 x	Tuerca autoempotrable M6 (4 pcs)
1 x	Tornillo allen M2,5x12
1 x	Reductora ZG38 2.8:1 en Linea
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Tuerca hexagonal M1,6 (10 pcs)
1 x	ZENOAH ZG 62 SL
1 x	Tornillo M2x6 PH
1 x	Arandela abierta 3.1 mm (20 pcs)
1 x	Tuerca hexagonal M2 (10 pcs)
1 x	Tuerca autoempotrable M8 (10 pcs)
1 x	Conversion ignition ZG45/62 CDi
2 x	Tornillo allen M2.5x5 (10 pcs)
1 x	Tornillo Servos M4x5/8 aluminio anodizado lila (4 pcs)
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Tuerca para montaje M3 (4 pcs)
1 x	Arandela de bloqueo 3 mm (10 pcs)
1 x	Motor DLE 35 RA
1 x	Motor EME 60 cc
1 x	Fibra carbono tela 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Captador DA50/100/150
1 x	Film perforado 100 cm / 20 m
2 x	Manga de fibra de vidrio Ø 20 mm x 5m
1 x	Plancha de goma espuma (310x210x8 mm)
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (100 mm) roll/ 50 m
1 x	Fibra Vidrio 425 g/m² Aero (10m x 1m)
1 x	Fibra vidrio 163 g/m² 130cmx5m (Interglas 92105, aero, finish FK
1 x	Panel Honeycom carbon 350x150x3.5mm
2 x	Caja de válvulas DA 50-R
1 x	Varilla acero Ø 5,0 mm x 1000 mm
1 x	Bulón para DA-60 DA-120
1 x	Fibra carbono tela No-cruzada ST 100g/m2 50 cm x 10 m
1 x	Plancha ABS 500 x 400 x 2,0 mm (blanco)
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Fibra vidrio 160 g/m2 "twill weave" (20 m x 1 m)
1 x	Aceite VALVOLINE SynPower 2T 1litro
1 x	Cinta fibra carbono 50 mm 3k 200 g/m2 x 10m
1 x	Plancha fibra vidrio 620x540x2,0 mm
1 x	Plancha fibra vidrio 350x150x0.5 mm
1 x	Fibra de vidrio 100 g/m² (50 m x 100 cm)
1 x	Cinta fibra de vidrio 130 g / m² (Silane, liso) 25 mm, 100m
1 x	Fibra vidrio 160 g/m2 "twill weave" (10 m x 1 m)
1 x	Carter trasero DA-50R
1 x	Fibra de vidrio 80 g/m² (silane, tela cruzada) 100 cm x 50m
1 x	Arandela Del. DA-50R/60/70
2 x	Cinta fibra carbono 25 mm 3k 125 g/m2 x 10m
1 x	Peel Ply liso 64 g/m2 150 cm x 20 m
1 x	Aceite para Bomba Vacio (1 litro)
1 x	Fibra de vidrio 49 g/m² (1,10 x 1m)
1 x	Plancha fibra vidrio 1200x1000x0,2 mm
1 x	Varilla Aluminio Ø 4,0 mm x 3000 mm
1 x	Varilla latón hexagonal Ø 3.5 mm x 1000 mm
1 x	Plancha ABS 500 x 400 x 1 mm (blanco)
1 x	Liston ABS 1,0x4,0x1000 mm
1 x	Liston ABS 1,0x3,0x1000 mm
1 x	Eje barco de 270 mm 3/3 mm
1 x	Tubo ABS 20,0x18,0x1000 mm
1 x	Silent-blocks DLE 170M
1 x	Eje barco de 290x4 mm M4
1 x	Eje barco de 261 mm M4/M4 6.0x4.0 mm
1 x	Arandela conica ancha alumino M3 rojo (4 pcs)
1 x	Corona pequeña autoarranque DLE-170M
1 x	Para-RC Trike "RC-Bullix"
1 x	Set cintas unión paracaídas 145 cm
1 x	Piloto LUCAS ARTF
1 x	Aramid 50 daN 50 m
1 x	Motorización Trike XL (motor+regulador+helice)
1 x	Paramotor BackPack XXS 2
1 x	Cinta fibra vidrio 38 mm
1 x	Actuador electrico 25 mm
1 x	Hélice POWER-PROP 13x9
1 x	Tren retráctil veleros 8-16 Kg 2.5-3.2 (rueda 140 mm con freno)
1 x	Tren retráctil veleros 3-7 Kg 3.8-4.3 (sin rueda) 70-82 mm
1 x	Perfil Acero Inox. 9.0x5.0x1000 mm
1 x	Tren retráctil
1 x	Soporte para bridas hasta 3 mm (0,12") para tornillo M3 (10 pcs)
1 x	Tornillo Servos M2x5/16 (4 pcs)
2 x	Tornillo M2.2x9.5 (10 pcs) Especial cabinas, tapas servos
1 x	Reductora IPS 150 DX2BB-BXCS 7:1
1 x	Rueda de foam Ø 51 mm (2 pcs)
1 x	Soporte filtro FESTO (4 pcs)
1 x	Soporte conector XT-60 (2 pcs)
1 x	Hélice tripala 8x6
1 x	Soporte ECU Xicoy X-45
1 x	Hélice POWER-PROP 13x8
1 x	Tornillo cabeza boton M4x12 mm (5 pcs)
1 x	Hélice Electric Carbon 6x5
1 x	Tornillo allen M4x30 (10 pcs)
1 x	Hélice POWER-PROP 12x8
1 x	Pasador Ø 2 x 6 mm (10 pcs)
1 x	Círculo autoadhesivo 15 mm (30 pcs)
1 x	Helice Electric glass 9,5x6
1 x	Tornillo allen M2x8
2 x	Tornillo allen M2x3 mm (4 pcs)
1 x	Cilindro para DA-60 y DA-120
1 x	Aguja de baja DA-50R / 100I
1 x	Pasador Ø 1 x 6 mm (10 pcs)
1 x	Tornillo Servos M2x7/16 (4 pcs)
1 x	Disipador motor tipo 300
1 x	Ruedas ligeras 76 mm (2 pcs)
1 x	Tornillo M3x0,5x12 mm Cabeza Plana Titanio (4 pcs)
1 x	Tornillo Servos M2x9/16 (4 pcs)
1 x	Tornillo allen M2x5
1 x	Tornillo M2.2x13 (10 pcs) Especial cabinas, tapas servos
1 x	Reductora IPS 150 DX2BB-FXCS 11,8:1
1 x	Rueda de foam Ø 38 mm (2 pcs)
2 x	Tornillo allen M3x9 mm (4 pcs)
1 x	Tuerca para insertar hexagonal M3 Br (4 pcs)
1 x	Disipador motor tipo 400
1 x	Reductora IPS 150 DX2BB-DXCS 9,7:1
1 x	Carga cohete D3-P
1 x	Tubo carton cohete 25mm x 24mm x 230mm
1 x	Tubo carton cohete 50mm x 48mm x 250mm
1 x	Carga cohete D9-7
1 x	Motor ROTO-35 FS BM 4T
1 x	Tornillo M2x6 (10 pcs)
1 x	Motor ROTO-85 FS NG 4T 2 cylinder Boxer
1 x	Hélice POWER-PROP 10x7
1 x	Tornillo allen M3x16 (10 pcs)
1 x	Hélice Electric Carbon 10.5x7
1 x	Soporte bomba Xicoy X45
1 x	Hélice POWER-PROP 13x9 Izda
1 x	Círculo autoadhesivo 12 mm (49 pcs)
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Soporte conector MPX enrasado (6 pcs)
1 x	Tornillo M1,6x8 (10 pcs)
1 x	Hélice POWER-PROP 14x10
1 x	Soporte conector MPX empotrado (6 pcs)
1 x	Hélice Electric Carbon 9.5x6
1 x	Hélice POWER-PROP 11x9
1 x	Tornillo allen M3x5 (10 pcs)
1 x	Helice HUNTER 400
1 x	Tornillo M2.9x9.5 (10 pcs) Especial cabinas, tapas servos
1 x	Motor UMS Radial-7-160cc gas
1 x	Soporte grifo FESTO (2 pcs)
1 x	Hélice POWER-PROP 11x8
1 x	Tornillo M2x12 mm aluminio (4 pcs)
1 x	Hélice Electric Carbon 9.5x7
1 x	Helice tripala 15x7 MASTER AIRSCREW
1 x	Tornillo allen M2x12
1 x	Motor UMS Radial-5-150cc gas
1 x	Hélice Electric Carbon 10x7
1 x	Hélice POWER-PROP 11x6
1 x	Tornillo M2.9x13 (10 pcs) Especial cabinas, tapas servos
1 x	Hélice POWER-PROP 10x6
1 x	Hélice Electric Carbon 10.5x6

20,378.91EUR