2 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
2 x | Steering arm 12 mm Ø 4 mm (2 uds) |
2 x | One touch canopy lock |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | SUS wire 3m (nylon coated) |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
2 x | Steering arm 16 mm Ø 3 mm |
2 x | Cap closure 33/23.5mm (2 uds) |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
2 x | Steering arm 12 mm Ø 4 mm |
2 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Covered closure or fairings |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
3 x | Futaba Female 40 cm extension |
1 x | Futaba male 40 cm extension |
2 x | Extension silicon 30 cm male (Futaba) |
1 x | Extension silicon 30 cm male (Graupner) |
1 x | Extension silicon 100 cm (Futaba) |
2 x | Extension silicon 10 cm (Graupner) |
2 x | Extension 30 cm (Futaba) |
2 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
1 x | Premium servo extension 25cm |
2 x | Premium servo extension 50cm |
1 x | Extension silicon 100 cm (Graupner) |
2 x | Premium servo extension 75cm |
2 x | Extension silicon 35 cm male (Futaba) |
1 x | Cable S.BUS 3 salidas 100 mm |
3 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
2 x | Extension 7.5 cm |
2 x | Prolongador S-Bus JR/JR 20cm |
2 x | Cabel "Y" 15 cm |
3 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
2 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
2 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
2 x | Angled clevis with threaded rod M3 |
2 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Threaded coupler M2 (10 uds) |
2 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Optical RPM Sensor |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | "S" set for boats |
1 x | ABS Strip 1.0x3.0x1000 mm |
1 x | 2 LiPo XH>EH adapter |
1 x | Strip 2,5x1,25x330 mm |
2 x | M3/5Diam metal ball link V3 (2 pcs) |
1 x | 45 mm rods + T patellas set for direction control |
1 x | Snap pin for micro clevis (10 uds) |
1 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
1 x | Allen wheel collar M4x6 |
1 x | Allen wheel collar M4x4 |
1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
1 x | Pushrod greyline 4/3 with coupler M3 |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Cockpit aluminium closing 5.4g |
1 x | Extension silicon 30 cm female (Graupner) |
1 x | Extension silicon 25 cm (Graupner) |
1 x | Extension 90 cm (Futaba) |
1 x | Extension silicon 75 cm (Futaba) |
1 x | 200 mm extensión servo HITEC/JR |
1 x | Extension silicon 25 cm (Futaba) |
2 x | Extension PVC 150 cm (Graupner) |
1 x | Propeller POWER-PROP 7x7 |
1 x | Futaba S-Bus Rx/Gyro Link Lead |
1 x | Transmitter Balancer Futaba V |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Metal clevis M2,5 (10 uds) |
1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | Micro clevis (10 uds) |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | Micro clevis 0.8 mm(10 uds) |
1 x | Kwik link aluminio M3 L:30mm (6 uds) pinØ1.6mm Left |
1 x | Pulley brass 12/2 (2 pcs) |
1 x | Ball Link Plier |
2 x | GPS, Vario and altitude Sensor SBS-01G |
1 x | M3/5 Diam metal short ball link V3 (2 pcs) |
1 x | Ball link M1.6 (6 uds) |
1 x | Joint with bearing M3 22x5,5 |
1 x | M2,5 5Diam black ball link V2 (2 pcs) |
1 x | Ball link M3 (10 pcs, flat ball) |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Threaded coupler M3 (10 uds) |
2 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs) |
1 x | Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6 |
1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | Pin to cable coupler M1,6 ⌀ (6 pcs) |
1 x | Rubber bushing with bracket "A" type (2 pcs) |
1 x | Ball Link ALU M3 - RH (1 pcs) |
1 x | Futaba S-Bus Rx/Gyro Link Lead |
1 x | Neck strap Double V2 |
1 x | Adap/Exten for Futaba 12-14C |
1 x | Switch Cap L (Blue) |
1 x | Interruptor FUTABA FX-MZ (2 Posic. corto) |
1 x | Contest-S-Pult-Carbon mc-20/mc-24 |
1 x | Switch Cap L (black) |
1 x | Receiver bed (Blue) |
1 x | Servo HITEC HS-5085 MG Digi |
2 x | Servo HITEC HS-311 |
2 x | Servo HITEC HS-125 MG |
2 x | Servo HITEC D625 MW |
1 x | Servo HITEC HS-5125 MG Slim Metal Gear Wing Servo |
2 x | Servo HITEC D951 TW |
2 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Servo HS-5070 MH Hi Volt |
2 x | Retract undercarriage |
2 x | Servo HITEC D131 MW nano |
1 x | Servo HITEC HS-5475 HB Digi |
2 x | Servo Digital HITEC HS-5065 MG |
2 x | Servo HITEC HS-225 BB |
1 x | Servo HITEC HS-5245 MG Digi |
1 x | Servo HITEC HS-5087 MH |
2 x | Servo HITEC D645 MW |
2 x | Turbina JetsMunt M166TS |
2 x | Turbina JetsMunt M122 NG |
2 x | FOD guard for VT80BL, M90, M100K, M100XBL, M140K, M140XBL and M |
1 x | Steering arm 16 mm Ø 4 mm |
2 x | Sprung retractable undercarriage (Alfa model) |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
1 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
2 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b |
2 x | Retract undercarriage for gliders up to 3,5 Kg |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m |
1 x | Softshell Hispano Aviación |
1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
2 x | Cabel "Y" 30 cm (Futaba) |
1 x | Cabel "Y" 30 cm (graupner) |
1 x | Extension lead 15 cm Multiplex |
1 x | Extension 15 cm (Futaba) |
1 x | Futaba Female 40 cm extension |
1 x | Extension silicon 10 cm (Futaba) |
1 x | Block 21x19 mm (5 pcs) |
1 x | ABS tube 14.0x10.0x1000 mm |
1 x | BULLIT Wing 840 mm |
1 x | Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | wire tensioner (red) |
1 x | Wire easy tensioner (red) |
1 x | Cable coupler M3 (10 uds) |
1 x | Pulley brass 16/2 (2 pcs) |
1 x | Threaded coupler M2 (10 pcs) |
1 x | Transmitter Stick Ends V1 Red - M3 (2 pcs) |
1 x | Crystal Universal RX 35.170 Ch 77 |
1 x | ABS I Strip 10x5x1000 mm |
1 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | 290x4 mm M4 shaft ship |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | Jodel D.9 BeBe 2.400 mm Kit |
1 x | PARAGON Trainer 46-55 1580 mm |
1 x | Porta Kwik link M4 4 mm (2 pcs) |
1 x | Turnbuckle M2x22/35 (2pcs) |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Turnbuckle M2x29/43 (2pcs) |
1 x | Pulley brass 4/1,5 (2 pcs) |
1 x | Servo HITEC HS-45 HB, servo box |
1 x | Servo HITEC HS-325 BB |
1 x | Gear set HITEC HS-645MG/5645MG/5685MH |
1 x | Gear set HITEC HS-85 |
1 x | ER-50eVo Set A [2x ER50 + RB-45] |
1 x | Crystal Universal RX 35.090 Ch 69 |
1 x | Crystal Universal TX 35.140 Ch 74 |
1 x | Receiver RSF08SB comatible FUTABA |
1 x | Receiver GRAUPNER GR-16 HoTT |
1 x | Receiver RFA05 5Ch compatible FUTABA |
2 x | ECU BL180 Jets Munt |
1 x | Gear set HITEC HS-55 |
1 x | Blue aluminium double servo arm V3-Hitec 3,5inch |
1 x | 3,9 mm ZG20-ZG38 servo arm |
1 x | Telemetry adapter JestMunt |
1 x | Receptor GRAUPNER GR-24 HoTT |
1 x | Receiver R6008HV-A comatible FUTABA |
1 x | VARIO module Hott |
1 x | Receiver R7008HV comatible FUTABA |
1 x | Turbina JetsMunt VT98 NG |
1 x | HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos |
1 x | Gear set HITEC HS205/225MG/5245MG/7245MH |
1 x | Gear set HITEC HS-56 HB |
1 x | Servo case HS-225MG/225BB/5245MG |
1 x | Gear carbonite set HITEC HS-6965 |
1 x | Gear set HITEC HS-65 HB |
1 x | Servo HITEC HS-5585MH |
1 x | Blue Aluminium double servo arm V3-Hitec 3-3,5inch |
1 x | Gear set HITEC HS-311/322/325BB |
1 x | Gear set HITEC D645 MW |
1 x | Gear set HITEC HS-81 |
1 x | Servo HITEC HS-45 HB |
1 x | Gear set HITEC HS-225 |
1 x | Servo HITEC HS-225 MG |
1 x | Brake disc Electron Retracts |
1 x | RB-45 Electronic |
1 x | Manual Controller |
1 x | Electric Landing Gear ASPIRE (Elektron Retracts) |
1 x | ER40 Front Leg (with wheel 80mm) |
1 x | GS-200 Electronic |
|
19,233.35EUR |