Top » Catalog » Hardware » Servos » Hitec » ROIHS7954SH

109.00EUR

Servo HITEC HS-7954 SH Digital High
[ROIHS7954SH]

The HS-7954SH could be considered the most economical high voltage, high torque, coreless servo on the market. Based on the ultra popular HS-7955TG, the HS-7954SH has the added benefit of our high voltage coreless motor. With 403 inch ounce of torque at 7.4 volts, the HS-7954SH is fast too with a 0.12 second transit time when operating on a 2 cell LiPo pack. The HS-7954SH harnesses all this power by utilizing a heavy duty case that incorporates an aluminum heat sink, hardened steel gears, and two strong steel gear pins nested in brass axial bushings. Put it all together and you get one tough high voltage servo at a price that can't be beat.

Features:
• G2 Digital Circuit
• Steel Gear Train
• Ultra Performance HV Coreless Motor
• Heatsink Case
• Dual Ball Bearing Supported Output Shaft

Programmable Features:
- Dead Band Width
- Direction of Rotation
- Speed of Rotation (slower)
- End Points
- Neutral Points
- Fail Safe On/Off
- Fail Safe Point
- Resolution* (default is high resolution)
- Overload Protection* (default is off)
*These features are only programmable with the HFP-20 programmer.

Detailed Specifications:
- Motor Type: Coreless
- Bearing:Dual Ball Bearing
- Speed: 0,15 - 0,12 sec @ 60deg.
- Torque: (6v-7.4v) 333-403 oz/inch; 24-29 kg/cm
- Size: 39,88x19,81x36,83 mm (1,57x0,78x1,45 inch.)
- Weight: 65.20 g (2.30 oz)

temporarily out of stock

Reviews

Customers who bought this product also purchased

Ball link M3 RPA's-UAV's temporarily out of stock	DUPLEX R18 EX 2,4GHz + Rsat2 temporarily out of stock	Servo Mount M (blue) temporarily out of stock
Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) temporarily out of stock	Servo HITEC D951 TW temporarily out of stock	Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm) temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
    Aero-naut
    BLUE BIRD servo
    DUBRO
    Dymond
    Electron Retracts
    FEMA
    FUTABA
    Gabriel-Stahlformenbau
    Graupner
    Hacker
    Hitec
    JETI
    KAVAN
    KST Servo
    MKS Servos
    MULTIPLEX
    PICHLER
    ROBBE
    ROI-Import
    Savox
    SebART
    Secraft
    Servos
    Thunder Power
    Tonegawa-Seiko
    Toni Clark
    Top Model
    VOLZ
    Acc.Electronics
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

PT-22 Ryan Recruit 2290 mm (SEAGULL)
560.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Flat washer 1.7 mm (20 pcs)
2 x	M3 black washers (4 pcs)
4 x	Spring lock washer 2.6 mm (20 pcs)
1 x	Aluminium wide washer M3 red (4 pcs)
2 x	Glases Nimbus "Black"
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	Quicklock washer 1.5 mm (10 pcs)
2 x	Quicklock washer 4 mm (10 pcs)
1 x	Circlik for shaft 2.3 mm (10 pcs)
2 x	Circlik for shaft 1.5 mm (10 pcs)
2 x	Flat washer 2.2 mm (20 pcs)
1 x	Aluminium cap bolt washer M4 green (8 pcs)
3 x	Lock washer 3.2 mm (20 pcs)
1 x	M3-M4 rubber washer (8 pcs)
2 x	Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
4 x	Glases Flitemaster
1 x	Flat washer 3.2 mm (20 pcs)
2 x	Lock washer 2.7 mm (20 pcs)
1 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
1 x	Aluminium cap bolt washer M3 red (8 pcs)
1 x	Lock washer 4.3 mm (20 pcs)
2 x	Aluminium wide washer M4 Blue (4 pcs)
1 x	Aluminium cap bolt washer M4 red (8 pcs)
3 x	Quicklock washer 2.5 mm (10 pcs)
2 x	Quicklock washer 2 mm (10 pcs)
3 x	Flat washer 2.7 mm (20 uds)pcs)
1 x	Quicklock washer 1 mm (10 pcs)
2 x	Quicklock washer 3.5 mm (10 pcs)
2 x	Glases Stratus
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	Aluminium cap bolt washer M3 green (8 pcs)
1 x	Ventus 1:4 set of instruments
2 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Straightened threaded rod M2-1m
1 x	Straightened rod Ø 1.5 mm x 1500 mm
2 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	Brass rod Ø 1.5 mm x 1000 mm
3 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
2 x	Brass hexagonal rod Ø 4 mm x 1000 mm
3 x	Straightened threaded rod M3 - 1m
3 x	Straightened rod Ø 6.0 mm x 1000 mm
3 x	Straightened rod Ø 0.5 mm x 1000 mm
2 x	Straightened rod Ø 5.0 mm x 1000 mm
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	SE Ring 250 mm (2 pcs)
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	BALSA trip 8.0x8.0x1000 mm
2 x	SE Ring 200 mm (2 pcs)
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x	Marker ties (20 pcs)
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	SE Ring 480 mm (2 pcs)
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	BALSA trip 10x10x1000 mm
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	Beech dowels 4.0 x 1000 mm
1 x	SE Ring 330 mm (4 pcs)
1 x	Pine wood slat 6.0x6.0x1000 mm
2 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
2 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
2 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x	Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
2 x	Profile ABS half cane 3x1000 mm
1 x	T-Connector 4.0 mm x 1000 mm
1 x	U Profile ABS 2,0x4,0x1000 mm
1 x	ABS angle 1.5x1.5x1000 mm
1 x	L-Connector 4.0 mm x 1000 mm
2 x	ABS angle 4,0x4,0x1000 mm
1 x	ABS "T" angle 8.0x8.0x1000 mm
2 x	ABS "T" angle 2.0x2.0x1000 mm
3 x	Profile ABS half cane 2.5x1000 mm
1 x	Profile ABS Square 3 x 1000 mm
1 x	Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x	Cross Connector 4.0 mm x 1000 mm
2 x	ABS angle 10,0x10,0x1000 mm
2 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	ABS angle 2,0x2,0x1000 mm
1 x	U Profile ABS 3,0x6,0x1000 mm
1 x	Profile ABS half cane 2.0x1000 mm
1 x	U Profile ABS 5,0x10,0x1000 mm
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
2 x	ABS angle 3,0x3,0x1000 mm
1 x	Blue smoke canister 140 g
1 x	White smoke bombs AX-60 (5 pcs)
1 x	Propeller APC 14x8.5 Electric Pusher
1 x	White smoke bombs AX-9 (10 pcs)
2 x	B4-0 rocket charges (6 pcs)
1 x	White smoke canister 65 g
1 x	White smoke canister 100 g
3 x	AX-60 starters (5 pcs)
2 x	Green smoke canister 65 g
1 x	Propeller POWER-PROP 14x9 Izda
2 x	Smoke set "M"
3 x	Blue smoke canister 100 g
1 x	Yellow smoke canister 140 g
1 x	"S" set for planes
1 x	Ventral support for AX-18/AX-60
3 x	AX-60 starters (5 pcs)
1 x	LASER 73" 1.85m (05) PILOT
2 x	Black smoke bombs AX-60 (5 pcs)
1 x	Parachute expulsion foam
1 x	FALCON 20X9 CARBON PROPELLER (GAS)
1 x	Electric rocket starters (6 pcs)
1 x	Propeller POWER-PROP 13x9 Izda
1 x	White smoke bombs AX-3 (10 pcs)
1 x	Yellow smoke canister 100 g
1 x	Propeller POWER-PROP 13x9
1 x	Parachutist
2 x	"S" set for boats
1 x	Yellow smoke canister 65 g
1 x	Sandwich carbon + poplar 4mm + carbon 480x290 mm
2 x	Red smoke canister 100 g
2 x	Mixers smoke bombs AX-60 (5 pcs)
1 x	Initior Receiver FRX2 Wireless
1 x	Red smoke bombs AX-60 (5 pcs)
1 x	Smoke set "Glider"
2 x	PCARD Wireless System
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	Squared carbon wing joinner 5x5x220 mm
3 x	Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x	Lock nut M3 (10 pcs)
1 x	Hexagonal Nut M3 (10 pcs)
2 x	Tapping Screw M2.2x65 (10 pcs)
1 x	Screw M3x30 (10 pcs)
1 x	Angle support XT60 conector
4 x	Tapping Screw M2.2x13 (10 pcs)
2 x	Pan Head Screw M2x6 PH
1 x	Aro pasacable Ø25 mm (4 pcs)
2 x	Threaded insert M5 (10 pcs)
1 x	Kontronik ProgUnit
2 x	Support ECU Xicoy X-45
1 x	JetiBOX
1 x	Support pump Xicoy X45
2 x	Glases Moritz
1 x	10 mm floating pad (72 pcs)
1 x	Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs)
1 x	Screw M3x12 (10 pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 black pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 red pcs)
1 x	Pan Head Screw M1,6x8 (10 pcs)
1 x	Blind nut M2 (10 pcs)
1 x	Nut for mounting M5 (4 pcs)
1 x	Glases Nimbus
1 x	Aluminium wide washer M3 gold (4 pcs)
1 x	Screw M3x16 (10 pcs)
2 x	Circlik for shaft 1.2 mm (10 pcs)
3 x	Circlik for shaft 1.9 mm (10 pcs)
1 x	Brass rod Ø 0.5 mm x 1000 mm
2 x	Straightened rod Ø 7.0 mm x 1000 mm
1 x	Straightened rod Ø 0.8 mm x 1000 mm
2 x	Tail support (2 pcs)
1 x	Balls 4 mm
1 x	Nut M2
1 x	Pegamento Pu R 50g polyuretano
2 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	Blade holder center GFK 0,5 mm
1 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	Wheel keeper washer
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
2 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Optical RPM Sensor
1 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	Baering 3x8x4
1 x	UHU Por 50ml/40g
1 x	Shirt Hispano Aviación
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	FOAM - CURE™ (24g)
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	Screws M1,6x6 Allen
2 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x	Side Plate
1 x	Head lower part
1 x	Blade holder lower
1 x	Screw M3x16
1 x	Flat washer 4.3 mm (20 pcs)
1 x	Rudder
1 x	Profile ABS Square 2 x 1000 mm
1 x	ABS rectangular profile 12x6.0x1000 mm
2 x	Profile ABS half cane 4x2.5x1000 mm
1 x	Rubber profile 10-2 mm 2M
1 x	Black silicone 0,25 mm² wire (25 m)
1 x	21x14 Falcon electric carbon prop (64 g)
1 x	Profile ABS half cane 4x1000 mm
2 x	ABS rectangular profile 10x5.0x1000 mm
1 x	Profile ABS half cane 7.0x1000 mm
1 x	Profile ABS half cane 6.0x1000 mm
1 x	ABS angle 6,0x6,0x1000 mm
1 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x	White smoke bombs AX-18 (5 pcs)
1 x	Profile ABS Square 4 x 1000 mm
1 x	Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x	Plastic caps for AIR BURTS (30 pcs)
1 x	Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr
2 x	Tapping Screw M2.2x9.5 (10 pcs)
2 x	Tapping Screw M2.9x13 (10 pcs)
1 x	Hexagonal Nut M2 (10 pcs)
2 x	Spring lock washer 2.1 mm (20 pcs)
1 x	Titanium M3x0,5x12 mm Flat Head screw (4 pcs)
1 x	Titanium M3x0,5x8 mm Flat Head screw (4 pcs)
1 x	Threaded insert M3 (4 pcs)
2 x	Glases Ace
2 x	Motor OS 3820-1200 electric
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Soporte filtro FESTO (4 pcs)
1 x	Pan head screw M2x16 PH
1 x	Blind nut M5 (4 pcs)
2 x	Tapping Screw M2.9x9.5 (10 pcs)
1 x	Pan Head Screw M2x8 PH countersunk head
1 x	Lock washer 2.2 mm (20 pcs)
2 x	Spring lock washer 4.1 mm (20 pcs)
1 x	Blind nut M6 (4 pcs)
2 x	Socket Screw M2x3 mm (4 pcs)
2 x	Spring lock washer 3.1 mm (20 pcs)
1 x	Pan Head Screw M2x8 PH
1 x	Hexagonal Nut M2.5 (10 pcs)
1 x	Servo M2x7/16 screw (4 pcs)
1 x	Socket Head Screw M2x12
1 x	Tornillo cabeza boton M4x12 mm (5 pcs)
1 x	Treaded hexagonal socket insert M3 Br (4 pcs)
1 x	Socket Head Screw M2x8
1 x	Servo M2x9/16 screw (4 pcs)
1 x	Socket Head Screw M2x5
1 x	Servo M2x5/16 screw (4 pcs)
1 x	Socket Head Screw M2x10
1 x	Threaded insert M4 (4 pcs)
1 x	Glases Innovation Plus
1 x	Socket Head Screw M2,5x12
1 x	Glases Aspen
1 x	Landing gear Rocket 400
1 x	Rotorshape Elevator
1 x	Blade holder upper
1 x	White silicone 0,25 mm² wire (25 m)
1 x	Silicone 0,50 qmm servos wire Futaba (100 m)
1 x	Rocket cardboard tube 25mm x 24mm x 230mm
1 x	EXTRA 300 78" V3 Orange/Blue
1 x	Screws flush mount M2
1 x	Motor wall
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	Bearing 3x6x2,5
1 x	Head runner
1 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	Softshell Hispano Aviación
1 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Tray for FUTABA 18 SZ
1 x	SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm
1 x	Rocket cardboard tube 50mm x 48mm x 250mm
1 x	Wing tips support for AX-18/AX-60 (2 pcs)

9,129.31EUR