Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA17051

40.20EUR

MPS Gas-Cap-Powerswitch
[EMCA17051]

MPS Gas-Cap-Powerswitch (MPS = Magnetic Power Switch)

- Nicely shaped electronically power switch in Gas-Cap design for receiver sets, ignitions etc.
- The show stopper: turning On/Off is done with external magnet
- An inserted magnet means consumer is off, removing it turns it on ("remove before flight")
- The magnetically actuator is automatically tightened in its " Gas-Cap" by means of magnetically force
- The operating system is indicated by a bright shining blue ring
- Absolutely fail safe system concept due to a combination of Reed-Contact and Hall-Sensor
- The perfect switch - no ugly holes in the fuselage!
- Input voltage 6.0V ... 12.6V (up to 3S LiPo!)
- Continuous current 5A, peak current 20A
- Version including Robbe/Futaba connector (input and output)
- Highly flexible silicone strand with 0.5 mm2 cross section, about 30cm long
- High grade gold plated contacts (FCI)
- Mounting diameter: 15.5 mm, installation depth about 35mm

Delivery includes switching magnet, key ring, stainless steel screws, counter flange and operating instructions

temporarily out of stock

Reviews

Customers who bought this product also purchased

Opto Gas Engine Kill Switch temporarily out of stock	Propeller MENZ-S 17x10 temporarily out of stock	Propeller MENZ-S 18x12 temporarily out of stock
Cylidric hinge 33 mm Ø 2 mm (5 pcs) temporarily out of stock	Cable coupler M3 (10 uds) temporarily out of stock	PWC6 PowerWingConnector for 6 servos with fuselage socket temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Beaver DHC-2 DeHavilland 3000mm White/Black CYMODEL
975.02EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Propeller POWER-PROP 9x5
1 x	DYNAMOMETER S-1580
3 x	Propeller balancer
2 x	Truck-trailer for gliders 720 x 285 mm
1 x	Field folding model stand SebArt
1 x	Angle of incidence meter
2 x	Medidor ángulos y/o incidencias
1 x	Bungee HLG Premium
2 x	Propeller POWER-PROP 13x9
1 x	Propeller electric carbon 6x5
2 x	Propeller POWER-PROP 13x9 Izda
2 x	Propeller electric carbon 10x8
1 x	Propeller POWER-PROP 11x9
1 x	Propeller electric carbon 10.5x8
1 x	Propeller POWER-PROP 11x8
1 x	Propeller POWER-PROP 12x8
1 x	Propeller POWER-PROP 12x9
1 x	Propeller electric carbon 10.5x7
1 x	Propeller electric carbon 7x7
2 x	Propeller POWER-PROP 14x9
3 x	Propeller electric carbon 8.5x5
1 x	Propeller POWER-PROP 10x7
1 x	Propeller POWER-PROP 13x10
1 x	Propeller electric carbon 9.5x7
1 x	Propeller POWER-PROP 12x6
4 x	Propeller electric carbon 9.5x6
1 x	Propeller POWER-PROP 10x6
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x	Yellow smoke canister 100 g
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	ABS angle 4,0x4,0x1000 mm
1 x	Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	Round Rod 5,0x1000 mm
1 x	Landing gear axle 4x21 4 mm (2 uds)
1 x	Landing gear axle Ø 8 mm (2 uds)
2 x	Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th
1 x	120 mm leg for retract undercarriage with rotation sistem (1 pcs
1 x	Bearing block for noseleg landing gear
1 x	Fiberglass landing gear for 140-160
1 x	Wheel cover holder Ø 4 mm (2 uds)
1 x	40 mm air cylinder
1 x	Z-shaped servo mount
1 x	T-Hose connector 3-3-3 mm
1 x	White aluminium 230 mm landing gear
1 x	PROPELLER ELECTRIC glass 9,5x6
2 x	WingFix ULTRA Black Edition
2 x	Propeller POWER-PROP 15x8
1 x	Vasa model Catapult
1 x	Propeller POWER-PROP 14x9 Izda
1 x	Propeller POWER-PROP 9x6
1 x	6x4 tree blades propeller
2 x	Propeller electric carbon 10x6
1 x	Spinner red 36-38 mm
1 x	Spinner 3BL propeller pleg. 42 mm / 4,0 mm
1 x	Red spinner 40-45 mm
1 x	50 mm white plastic spinner for fixed propeller
1 x	42 mm white plastic spinner for folding propeller
1 x	Spinner 3BL propeller pleg. 36 mm / 6,0 mm
1 x	36 mm red plastic spinner for fixed propeller
1 x	Spinner 3BL propeller pleg. 42 mm / 5,0 mm
1 x	Spinner 3BL propeller pleg. 42 mm / 6,0 mm
1 x	Spare spinner 65 mm 3-Bl
1 x	Spinner plastic balck propeller pleg. 30 mm / 3,2
1 x	Red spinner 45 mm
1 x	45 mm white plastic spinner for fixed propeller
1 x	45 mm white plastic spinner for folding propeller
1 x	VITAPROP CARBON FOLDING PROP 15x9.5"
1 x	Rubber bushing with bracket "B" type (2 pcs)
1 x	Pin 2,5 to cable coupler M2,5 ⌀ pin 2,5 (6 pcs)
1 x	White large kwik link (10 pcs)
1 x	Pulley brass 14/2 (2 pcs)
1 x	Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	M4xM2,5xL30 nylon clevis and arm (10 uds)
1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm
1 x	Micro clevis 0.8 mm(10 uds)
2 x	Pulley brass 12/2 (2 pcs)
1 x	PIX Hawk with accesories
1 x	Spinner 3BL propeller pleg. 40 mm / 4,0 mm
1 x	50 mm black plastic spinner for fixed propeller
2 x	16x10 tree blades propeller Master Airscrew
1 x	Propeller POWER-PROP 11x6
1 x	Porpeller HUNTER 480
2 x	Propeller POWER-PROP 7x7
2 x	Propeller electric carbon 8.5x6
1 x	Motor mount VANQUIST 48" F3A
1 x	ABS tube 7.0x6.0x1000 mm
1 x	Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x	ABS tube 4.0x2.0x1000 mm
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	ABS tube 5.0x4.0x156 mm
1 x	Glases Nimbus
1 x	Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	Pulley brass 16/2 (2 pcs)
1 x	Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x	Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x	ESC ALPHA 60A HV
1 x	Glases Innovation Plus
1 x	Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr
1 x	Glases Stratus
1 x	DJI FPV Combo
1 x	Bateria DJI Mini 2 2250 mAh
1 x	AXI 2204 Multicopter
1 x	Glases Nimbus "Black"
1 x	Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x	T-Motor U7-V2.0 Kv420
1 x	Glases Moritz
1 x	TS832 to Gopro AV/Power Cable
1 x	Motor 2212 (1000KV) Quadcopter F450
1 x	Glases Aspen
1 x	Motor brushless 1806 - 2300 Kv Cuadracopter
1 x	T-Motor MN705-S Kv125 (pack 2 uds)
1 x	Combo 4 pcs AXI 2204 Multicopter
1 x	TS832 to Gopro AV/Power Cable DJI Phantom 2 Compatible
1 x	Glases Ace
1 x	Glases Flitemaster
1 x	Restrictor FESTO 3/3 mm
1 x	Field folding model stand
1 x	Flybar support metal LAMA
1 x	Wheel FEMA 112 mm / 6 mm
1 x	Surface Indicator Gauge Small
1 x	Wheel FEMA 100 mm / 6 mm
1 x	Servo holder for retract
1 x	Compact on-board starting system (9525)
1 x	NoNa BB wheel Ø200x60mm in pair
1 x	Compact on-board starting system (9724)
1 x	SU 29S 140 carbon landing gear
1 x	Legs + electric brakes for Viper Jet 1700 mm
1 x	Helices DJI Mavic Air 2 STEALTH "Black" (4x Ud)
1 x	Central piece 52 mm - 5º
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs)
1 x	Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs)
1 x	Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm
1 x	Micro clevis (10 uds)
1 x	Micro clevis (10 uds)
1 x	Ka-8b ELECTRIC 6000 mm ARF 1:2.5 (Phoenix Models)
1 x	SATORI 2 PRO V C64 F5J
1 x	Elevator VENTUS 2cx 4.5m
1 x	Gobe R-26S (Airwold)
1 x	EXTREME FLIGHT BLACK MAGNETIC ROUND FILLER PLUG
1 x	EXTRA 330SC-E 95" Orange/Blue/White
1 x	ABS tube 9.0x8.0x1000 mm
1 x	Sparkplug 1/4-32 Glow
1 x	Carbon blade 230 mm

11,597.51EUR