Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

VSpeak ECU converter KingTech
79.00EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

1 x	Lancha Pilot
1 x	Remolcador "Jonny Hafenschlepper"
1 x	Barco pesquero Jule Fischkutter
1 x	Portaequipajes BIG-MALIBU XL 285x90x44 cm Gris
3 x	Ancla ALMIRALSANKER 40 mm (2 uds)
1 x	Acoplador palo Ms 15 mm
2 x	Ancla Met. 16 mm (5 pcs)
2 x	Ancla Admiralsanker 60 mm (2pcs)
2 x	Ancla madera 30 mm (2 uds)
1 x	Antena 50 mm (2 uds)
2 x	Ametralladora MG 1,8 cm (5 pcs)
2 x	Bisagra 4x14 mm (20 pcs)
1 x	Acoplador laton Ø 4.0 / 3.2 mm L: 25 mm
2 x	Acoplador laton Ø 2 mm L: 15 mm
1 x	Barandilla Ms 10x250 mm (2 pcs)
2 x	Balsa salvavidas 47 mm
2 x	Acoplador laton Ø 3.0 / 2.3 mm L: 20 mm
2 x	Ancla 40 x 24 mm (2 pcs)
2 x	Ancla 80 mm (2 uds)
1 x	Ancla 50 mm (2 uds)
2 x	Base montaje Ms 12 mm
1 x	Barandilla 5x100 mm
1 x	Ancla 16 mm (2 pcs)
1 x	Acoplador 5 - 5 mm
1 x	Base montaje Ms 8 mm
1 x	Ancla 25 mm (2 uds)
1 x	Ancla 25 mm (2 uds)
2 x	Bloque (plastico) 8 mm / 1 ranura (20 pcs)
1 x	Film perforado 100 cm / 20 m
2 x	AIREX® M060 lámina (amarilla) 1200x550x1,2 mm (10 pcs)
2 x	Fibra carbono tela 68 g/m² (Aero, plain weave) 100 cm x 0.5m
1 x	Fibra carbono tela 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Cinta fibra carbono 25 mm 3k 125 g/m2 x 50m
2 x	Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Focos Ms 4 mm (10 pcs)
1 x	Rodamiento axial Ø 5 mm
1 x	Mástil bandera 45 mm
1 x	Hélice de 25,0 mm 3-BL M4 (hélice derecha)
1 x	Soporte eje helices 7mm (3 pcs)
1 x	Rodamiento eje bronce Ø 5 x Ø 8 x 8 mm
2 x	Lancha salvavidas 58 mm (5 pcs)
1 x	Bisagra 7x12 mm (20 pcs)
1 x	Hélice 2 palas 42mm (hélice izquierda)
1 x	Eje barco de 270 mm 3/3 mm
1 x	Timón 30x49 mm
1 x	Hilo latón 0.30 mm (25 m)
1 x	Polea 1Rolle 5x7x3 mm (5 uds)
1 x	Timon madera 45 mm
1 x	Baranda Ø 2mm (20 pcs)
1 x	Bocina 30 mm (1 pcs)
1 x	Eje barco de 261 mm M4/M4 6.0x4.0 mm
1 x	Bisagra de remo metal 28 mm de largo (2 pcs)
2 x	Arco de red 75 mm
1 x	Escaleras 3 mm (L 100 mm)
1 x	Hélice 44,0 mm (hélice izquierda)
2 x	Acoplador laton Ø 5.0 / 4.0 mm L: 25 mm
1 x	Dogdrive props 10 mm
1 x	Polea 15x23 mm (5 pcs)
1 x	Eje barco 290 mm M5
2 x	Plancha ABS 500 x 400 x 1,5 mm (blanco)
1 x	AIREX® M060 lámina (amarilla) 1200x550x4,0 mm (5 pcs)
1 x	Planeador STROLCH
1 x	Fibra carbono tela 160g/m2 100 cm x 3 m
1 x	Manta bolsa de vacio 150 gr/m2 Bobina 20m
1 x	Plancha aluminio 500x250x0.5 mm
1 x	Fibra carbono TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (100 mm) roll/ 50 m
1 x	AIREX® M060 lámina (amarilla) 1200x550x6,0 mm (5 pcs)
1 x	Manta bolsa de vacio 150 gr/m2 Bobina 5 m
1 x	AIREX® M060 lámina (amarilla) 1200x550x2,0 mm (10 pcs)
2 x	Lancha neumatica 95 mm
2 x	Ventilador plastico 17x48 mm (2 pcs)
1 x	Ventanilla de 14 mm para tornillos (10 pcs)
1 x	Ancla Admiralsanker 70 mm (2pcs)
1 x	Casquillo Ø 6 mm (20 pcs)
1 x	Soporte barandilla madera 8 mm (10 pcs)
1 x	Hélice 2 palas 39 mm (hélice izquierda)
2 x	Cardan nylon negro (sin piñones)
1 x	Hélice 2 palas 36mm (hélice derecha)
1 x	Remache Ø 4,0 mm (50 pcs)
3 x	Salvavidas Ø 8 mm (24 pcs)
1 x	Soporte con aro 17 mm (10 pcs)
1 x	Bloque (plastico) 5 mm / 1 ranura (20 pcs)
1 x	Polea 21x19 mm (5 pcs)
2 x	Puerta izdas. 19x10mm (10pcs)
1 x	Guia-cabos 20 mm (2 pcs)
1 x	Soporte mástil 12 mm
1 x	Roldana Pl. 1R. 3 mm
1 x	Farol Ms. 3v/10 mm
1 x	Pastecas 7 mm (20 pcs)
1 x	Ventilación metalica 21 mm
1 x	Pilote barandilla 3D/11 mm (10 pcs)
1 x	Soporte barandilla madera 10 mm (10 pcs)
1 x	Motor OS MAX 120 AX
1 x	Motor OS 95 AX
1 x	Motor OS 15 LA
1 x	Motor OS 55 AX
1 x	Motor OS 105 HZ-R Heli
1 x	Motor OS 75 AX
1 x	Motor OS 105 HZ-R con pipa 105
2 x	Bujia OS G5 gasolina
1 x	Captador OS GT 33 cc
1 x	Motor OS 46 AX II
1 x	Carburador OS (Type 40K) 46AXII
1 x	Motor OS FS-62V 4T
2 x	Motor OS MAX 65 AX (incl. silenciador)
1 x	OS 37 SZ-H, Biela
1 x	Motor OS 50 SX-Hyper
1 x	Motor OS FS 95 V4T
1 x	PET film Mylar® A 350, 50 cm, roll/ 2 m
1 x	Plancha carbono 350x150x1.5 mm
1 x	Plancha carbono 350x150x5.0 mm
2 x	Pasacable Ms 9x5 mm (10 pcs)
1 x	Ojos de buey 13x9x6 mm (20 pcs)
1 x	Fuera Borda MERCURY type A
1 x	Regulador Actro-Marine 60A
1 x	Motor ACTRO 50-2-760
1 x	Fibra de vidrio 163 g/m² 1 m x 5 m (Twill)
1 x	Fibra de vidrio 80 g/m² (silane, tela cruzada) 100 cm x 10m
1 x	Fibra de vidrio 25 g/m² 5000x1270 mm
1 x	Fibra carbono tela 245g/m2 127 cm x 10m
1 x	Fibra de vidrio picada 0.2 mm (1 Kg)
1 x	Fibra vidrio 160 g/m2 "twill weave" (5 m x 1 m)
1 x	Fibra carbono tela No-cruzada ST 200g/m2 50 cm x 20 m
1 x	Casquillo Ø 11 mm (20 pcs)
1 x	Roldana Pl. 2R. 12 mm
1 x	Casquillo Ø 4 mm (2 pcs)
1 x	Conector ABS "CRUZ" 4.0 mm x 1000 mm
1 x	Canal de ABS de 3,0x6,0x1000 mm
2 x	Lancha salvavidas Kutter .Ösen 43 mm (5 pcs)
1 x	Bloque (plastico) 3 mm / 1 ranura (20 pcs)
1 x	Plancha carbono 350x150x2.5 mm
1 x	Salvavidas Ø 17,0 mm (10 pcs)
1 x	Plancha ABS 500 x 400 x 0,5 mm (blanca)
1 x	Plancha fibra vidrio 350x150x2.0 mm
1 x	Fibra carbono tela 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Motor COMPACT drive 26/45-20 DL=175
1 x	Pilote barandilla 16 mm (10 pcs)
1 x	Molinete 40x27x13 mm
1 x	Motor ACTRO 35-4-1100
1 x	Regulador ROOKIE 35 Amp motor escobillas
1 x	Regulador NAVY V15R
1 x	Regulador NAVY 540R
1 x	Motor ACTRO 28-4-880
1 x	Reguladro ACTROCON 60A
1 x	Fibra de vidrio 49 g/m² (1,10 x 3m)
1 x	Fibra carbono tela No-cruzada ST 200g/m2 50 cm x 5 m
1 x	Fibra de vidrio 49 g/m² (1,27 x 20m)
1 x	Fibra carbono tela No-cruzada ST 100g/m2 50 cm x 10 m
1 x	Fibra de vidrio 163 g/m² 1 m x 50 m (Aero, finish FK 144, plain)
1 x	Fibra de vidrio 163 g/m² 1 m x 20 m (Aero, finish FK 144, plain)
1 x	Fibra carbono tela 245g/m2 125 cm x 20 m
1 x	Fibra de vidrio 80 g/m² (silane, tela cruzada) 100 cm x 50m
1 x	Fibra de vidrio picada 3mm (1 Kg)
1 x	Hélice RABOESCH M4 30 mm (3 Palas) (Hélice izquierda)
1 x	Eje barco de 290 mm M5x18 mm
1 x	Adaptador 5,0 mm M8 para cono 40 mm hélice pleg.
1 x	Cono rojo 30 mm (recambio)
1 x	Cono autoventilado hélice plegable 45 mm diámetro / eje 4 mm
1 x	Motor RACE 620 Navy 12v
1 x	Cono negro 40 mm (recambio)
1 x	Cono autoventilado hélice plegable 38 mm diámetro / eje 5 mm
1 x	Cono blanco autoventilado hélice plegable 50 mm diámetro / eje 6
1 x	Cono blanco autoventilado hélice plegable 42 mm diámetro / eje 6
1 x	Motor OS MAX 160 AX
1 x	OS 75 AX, Cigüeñal
1 x	OS 37 SZ-H, Muelle carburador OS 40, 60, FS70, 91S y 120SE
1 x	Adaptador 3,2 mm M6 para cono 30 mm hélice pleg.
1 x	Adaptador 3,2 mm M8 para cono 40 mm hélice pleg.
1 x	Adaptador 3,0 mm M8 para cono 40 mm hélice pleg.
1 x	Adaptador 3,0 mm M6 para cono 30 mm hélice pleg.
1 x	Adaptador 4,0 mm M8 para cono 40 mm hélice pleg.
1 x	Adaptador 4,0 mm M6 para cono 30 mm hélice pleg.
1 x	Cono autoventilado hélice plegable 40 mm diámetro / eje 5,0 mm
1 x	Cono blanco 38-45 mm (recambio)
1 x	Cono recambio 32 mm white
1 x	Cono autoventilado hélice plegable 38 mm diámetro / eje 3,17 mm
1 x	Cono blanco 40-45 mm (recambio)
1 x	Cono autoventilado 40 mm "Z"
1 x	Cono autoventilado 30 mm "Z"
1 x	Cono autoventilado recambio 50-55 mm diámetro blanco
1 x	Cono GM Propellers 40 mm / 6 mm Muleta "Z"
1 x	Cono autoventilado hélice plegable 40 mm diámetro / eje 6 mm
1 x	Cono autoventilado hélice plegable 30 mm diámetro / eje 3,0 mm

13,437.05EUR