Top » Catalog » Motors & Turbines » Explosion » Gasoline » OS Engines » OSGT154040

419.90EUR

OS GT15 W/E-4040 for airplane
[OSGT154040]

Aero gasoline engine with 14.95ccm power 2.37 horsepower at 15000o / min., Idle speed 2000rpm, engine weight 631g, exhaust weight 178g, ignition weight 95g designed for 2-cl. LiPo and Life operation.

O.S. The MAX GT15 gives pilots models designed for 10cc 2-stroke or 15cc 4-stroke glow engines all they need - reliability and durability, simple and inexpensive operation, easy adjustment, high efficiency and high performance. Designers O.S. MAX has given him more power and the ability to turn propellers of larger diameter than competing engines of this class, making it the No. 1 choice for pilots who are not satisfied with compromises!
The same built-in dimensions as the “glow” O.S. MAX 65AX.
New IG-06 electronic ignition with power from 4-5 cells NiCd / NiMH or 2S LiPo / LiFe.
Double needle carburetor type 61H with pressure regulator and fuel pump PD-08 for perfectly stable fuel delivery in all flight modes.
It uses an affordable blend of Natural Gasoline with two stroke oil blended at a ratio of 25-50: 1 (depending on oil type).
Economical operation - 200 ml tank is sufficient for 12-13 minutes of aerobatic flying with a reserve of 8-10 minutes at full throttle).
Expansion silencer E-4040 with effective sound attenuation allowing the exhaust outlet to be rotated in 90 ° increments
The noble deep sound of a two-stroke gasoline ideal for mock-ups and semi-scale models, the high performance and fast response needed for aerobatic models.
The GT15 is a two-stroke gasoline engine designed for aircraft models designed to drive 10cc 2-stroke or 15cc 4-stroke glow engines. It is equipped with a double needle carburetor type 61H with pressure regulator and fuel pump PD-08. The IG-06 electronic ignition and the E-4040 expansion muffler are also supplied as standard.

Propeller proportions: Run-in: 13x8 “, Sport / Aerobatic / Scale model: 13x8-11“ 14x8-10 “17x6“ 15x8 “
Recommended fuel: run-in 25: 1 (25 parts natural gasoline per 1 part KLOTZ oil), normal 50: 1 operation
The fuel tank (200-300 ml) and all hoses must be for gasoline.
Engine set includes:GT15 engine with RC carburetor 61H with pressure regulator and pump PD-08, IG-06 electronic ignition, spark plug CM-6, muffler E-4040, operating instruction manual.

Desplazamiento [ccm] 14,95
Número de cilindros 1
Calibre [mm] 27,7
Carrera [mm] 24,8
Velocidad de funcionamiento [rpm] 2000 - 15000
Potencia del motor (a 15000 rpm) [kW] 1,76
Potencia (a 15000 rpm) [HP] 2,4
Peso (motor) [g] 631
Peso (escape) [g] 178
Peso (encendido) [g] 95
Bujia recomendada CM-6
Volumen recomendado del tanque [ml] 200 - 300
Rosca de la tuerca de la hélice UNF 5 / 16-24

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Servo GO-1006MG (0.052s/60º, 3.0Kg)
52.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Pilot Lotsenboot
1 x	Remolcador "Jonny Hafenschlepper"
1 x	Fishing boat Jule Fischkutter
1 x	Big-Malibu XL Roof box with surfboard rack GREY
3 x	ALMIRALSANKER anchor 40 mm (2 uds)
1 x	Stick coupler Ms 15 mm
2 x	Ancla Met. 16 mm (5 pcs)
2 x	Ancla Admiralsanker 60 mm (2pcs)
2 x	Wood anchor 30 mm (2 uds)
1 x	Antenna 50 mm (2 uds)
2 x	MG cannon 1.8 cm (5 pcs)
2 x	Hinge 4x14 mm (20 pcs)
1 x	Rigid coupling brass Ø 4.0 / 3.2 mm L: 25 mm
2 x	Rigid coupling brass Ø 2 mm L: 15 mm
1 x	Barandilla Ms 10x250 mm (2 pcs)
2 x	Liferaft 47 mm
2 x	Rigid coupling brass Ø 3.0 / 2.3 mm L: 20 mm
2 x	Ancla 40 x 24 mm (2 pcs)
2 x	Anchor 80 mm (2 uds)
1 x	Anchor 50 mm (2 uds)
2 x	Mounting base Ms 12 mm
1 x	Railing 5x100 mm
1 x	Ancla 16 mm (2 pcs)
1 x	Coupling bush 5 - 5 mm
1 x	Mounting base Ms 8 mm
1 x	Anchor 25 mm (2 uds)
1 x	Anchor 25 mm (2 uds)
2 x	Klumpblock (Plastik), Höhe 8 mm, 1 Rille, 20 Stück
1 x	Buy Perforated film 100 cm / 20 m
2 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
2 x	Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
2 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Focos Ms 4 mm (10 pcs)
1 x	Axial ball bearing Ø 5 mm
1 x	45 mm flag mast
1 x	25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller)
1 x	Propeller shaft supports 7mm (3 pcs)
1 x	Bronze bearings Ø 5 x Ø 8 x 8 mm
2 x	Lancha salvavidas 58 mm (5 pcs)
1 x	Hinges 7x12 mm (20 pcs)
1 x	42,0 mm propeller (left propeller)
1 x	270 mm 3/3 mm shaft ship
1 x	Rudder 30x49 mm
1 x	Brass wire 0.30 mm (25 m)
1 x	Block 1Rolle 5x7x3 mm (5 pcs)
1 x	Timon madera 45 mm
1 x	Railing Ø 2mm (20 pcs)
1 x	Bocina 30 mm (1 pcs)
1 x	261 mm M4/M4 6.0x4.0 mm shaft ship
1 x	Bisagra de remo metal 28 mm de largo (2 pcs)
2 x	75 mm
1 x	3 mm Leader (L 100 mm)
1 x	40,0 mm hydro-propeller (left hydropropeller)
2 x	Rigid coupling brass Ø 5.0 / 4.0 mm L: 25 mm
1 x	10 mm dogdrive props
1 x	Block 15x23 mm (5 pcs)
1 x	290 mm M5 Prop shaft
2 x	ABS 500 x 400 x 1,5 mm (white)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x	Glider STROLCH
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x	Aluminium sheet 500x250x0,5mm
1 x	Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
2 x	Lancha neumatica 95 mm
2 x	Plastic fan 17x48 mm (2 pcs)
1 x	14 mm Portholes for screws (10 pcs)
1 x	Ancla Admiralsanker 70 mm (2pcs)
1 x	Housing Ø 6 mm (20 pcs)
1 x	Soporte barandilla madera 8 mm (10 pcs)
1 x	39,0 mm propeller (left propeller)
2 x	Kardan Black (without pinions)
1 x	36,0 mm propeller (rigth propeller)
1 x	Rivette Ø 4,0 mm (50 pcs)
3 x	Life guard Ø 8 mm (24 pcs)
1 x	Soporte con aro 17 mm (10 pcs)
1 x	Klumpblock (Plastik), Höhe 5 mm, 1 Rille, 20 Stück
1 x	Block 21x19 mm (5 pcs)
2 x	Left doors 19x10mm (10pcs)
1 x	Guide capes 20 mm (2 pcs)
1 x	12 mm mast holder
1 x	Sheave Pl. 1R. 3 mm
1 x	Farol Ms. 3v/10 mm
1 x	Juffern, Plastik, Ø 7 mm, 20 Stück
1 x	Fan metalic 21 mm
1 x	Pilote barandilla 3D/11 mm (10 pcs)
1 x	Soporte barandilla madera 10 mm (10 pcs)
1 x	Motor OS MAX 120 AX
1 x	Motor OS FS 95 AX
1 x	Motor OS 15 LA
1 x	Motor OS 55 AX
1 x	OS Engine 105HZ-R Heli
1 x	Motor OS FS 75 AX
1 x	OS Engine 105HZ-R Heli with pipe 105
2 x	Bujia OS G5 gasolina
1 x	Captador OS GT 33 cc
1 x	Motor OS 46 AX II
1 x	Carburador OS (Type 40K) 46AXII
1 x	Motor OS FS-62V 4T
2 x	Motor OS MAX 65 AX (incl. muffler)
1 x	OS 37 SZ-H, Connecting rod
1 x	Motor OS 50 SX-Hyper
1 x	Motor OS FS 95 V 4T
1 x	PET film Mylar® A 350, 50 cm, roll/ 2 m
1 x	Carbon plate 350x150x1.5 mm
1 x	Carbon plate 350x150x5.0 mm
2 x	Cable pass Ms 9x5 mm (10 pcs)
1 x	Ojos de buey 13x9x6 mm (20 pcs)
1 x	Race Outboard MERCURY type A
1 x	Regulador Actro-Marine 60A
1 x	Motor ACTRO 50-2-760
1 x	Fiberglass 163 g/m² 1m x 5 m (Twill)
1 x	Glass fabric 80 g/m² (silane, twill) 100 cm x 10m
1 x	Fiberglass 25 g/m² 5000x1270 mm
1 x	Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Chopped glass fibre strands 0.2 mm
1 x	Glass fabric 160 g/m² (Twill weave) 100 cm x 5m
1 x	Carbon Non-crimp ST 200 g/m² 50 cm x 20 m
1 x	Housing Ø 11 mm (20 pcs)
1 x	Sheave Pl. 2R. 12 mm
1 x	Housing Ø 4 mm (2 pcs)
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	U Profile ABS 3,0x6,0x1000 mm
2 x	Lancha salvavidas Kutter .Ösen 43 mm (5 pcs)
1 x	Klumpblock (Plastik), Höhe 3 mm, 1 Rille, 20 Stück
1 x	Carbon plate 350x150x2.5 mm
1 x	Life guard Ø 17,0 mm (10 pcs)
1 x	ABS 500 x 400 x 0,5 mm (white)
1 x	Fiberglass plate 350x150x2.0 mm
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	COMPACT drive 26/45-20 DL=175 motor
1 x	Pilote barandilla 16 mm (10 pcs)
1 x	Small mill 40x27x13 mm
1 x	Motor ACTRO 35-4-1100
1 x	Robbe Modellsport ROOKIE 35 ESC FOR BRUSH MO TORS
1 x	SC NAVY V15R
1 x	Regulador NAVY 540R
1 x	Motor ACTRO 28-4-880
1 x	Reguladro ACTROCON 60A
1 x	Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 3m
1 x	Carbon Non-crimp ST 200 g/m² 50 cm x 5 m
1 x	Glass fabric 49 g/m² (1,27 x 20 m)
1 x	Carbon Non-crimp ST 100 g/m² 50 cm x 10 m
1 x	Fiberglass 163 g/m² 1m x 50 m (Aero, finish FK 144, plain)
1 x	Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain)
1 x	Carbon Non-Woven, 245 g/m² 125 cm x 20 m
1 x	Glass fabric 80 g/m² (silane, twill) 100 cm x 50m
1 x	Chopped glass fibre strands 3 mm
1 x	Propeller RABOESCH M4 30 mm (3 Blades) (Left hydropropeller)
1 x	290 mm 290 mm M5x18 mm shaft ship
1 x	Adapter 5,0 mm M8
1 x	Spinner red 30 mm
1 x	Spinner propeller pleg. 45 mm / 4 mm
1 x	Motor RACE 20 Navy 12v
1 x	Spinner negro 40 mm
1 x	Spinner propeller pleg. 38 mm / 5 mm
1 x	White spinner propeller pleg. 50 mm / 6 mm
1 x	White spinner propeller pleg. 42 mm / 6 mm
1 x	Motor OS MAX 160 AX
1 x	OS 37 SZ-H, Crankshaft
1 x	OS 37 SZ-H, Carburetor Wharf OS 40, 60, FS70, 91S and 120SE
1 x	Adapter 3,2 mm M6
1 x	Adapter 3,2 mm M8
1 x	Adapter 3,0 mm M8
1 x	Adapter 3,0 mm M6
1 x	Adapter 4,0 mm M8
1 x	Adapter 4,0 mm M6
1 x	Spinner propeller pleg. 40 mm / 5,0 mm
1 x	Spare white 38-45 mm spinner
1 x	Turbo light spinner cap white 32mm
1 x	Spinner propeller pleg. 38 mm / 3,17 mm
1 x	Spare white 38-45 mm spinner
1 x	Z Spinner (CN) 40mm
1 x	Z Spinner (CN) 30mm
1 x	Spinner fold propeller 50-55 mm (white spare spinner)
1 x	GM Propellers Spinner Scale ø 40mm Diameter, Motor shaft ø 6mm C

13,405.99EUR