117.90EUR

DUPLEX R10 receiver 2,4GHz
[MMDR10]


DUPLEX R10 receiver 2,4GHz
This is new 14 channels receiver DUPLEX R14. This receiver has possibiliety for connection next receivers so called receiver satellite - DUPLEX Rsat (for buying separately). Power supply is provided throught MPX connector or usual JR connectors. An additional satellite receiver RSat complements the receivers R10, R12, 14 and R18. This receiver is a full DUPLEX system receiver offering the complete functional spectrum of the system. Instead of classical servo pulses the output of the RSat receiver offers a PPM signal only. This PPM signal is furtheron processed by the receivers R10, R12, R14, R18 or by compatible RC equipment which requires a PPM signal at the input.

DUPLEX 2.4 GHz system by JETI Overview
We present the innovative DUPLEX 2.4 GHz system by JETI Model for radio controlled models of all types working on the 2,4GHz band. Problems with interference and frequency control will be history, and operation on the 2,4GHz band will change your approach to radio control forever. In designing the DUPLEX system, Jeti aim has always been to improve on what is offered by other radio control systems currently on the market. Jeti sistems offer you very sophisticated equipment offering reliable – duplex – secure – digital transmission of information.

Main advantages of the DUPLEX system:
- No crystals used – no frequency checks required
- You do not have to buy a new transmitter
- Easy and reliable binding of receivers to transmitters (you can use endless numbers of receivers with every transmitter)
- High interference rejection provides safe operation - even in an interference rich environment
- Digital data transmision ensures distortion free transfer of information to the model
- Maximum safety
- Can be used with all types of models (aircraft, boats, cars)
- Two way communication between receiver and transmitter
- Telemetric data transfer to the model operator in real time
- High sensitivity of receivers and high output of transmitters ensures visibility limit range
- Self-correcting coding of information
- The DUPLEX system can handle up to 16 input channels with the use of two receivers
- Two aerial receivers ensure continuous control of models in any position, and eliminate blind spots caused by signal reflection
- Quality plotting of transmission channels and antenna position at start up, providing a low probability of transmission on busy or - Interference rich channels
- Immediate response of the receiver output to changes in transmitter controls
- Transmitter modules are fitted with an alarm triggered by the receiver in dangerous situations (low receiver battery voltage, poor reception, etc.)
- The DUPLEX system provides simultaneous operation of more than one receiver on the same transmitter (listening-in)
- Real time data display and easy programing using the JetiBox
- Failsafe with adjustable time delay.
- Receiver outputs can be changed to match any transmitter channel input
- All of the receivers allow the setting of mixers, servo reverse, ATV, servo slow for each output on the receiver, even with the simplest of transmitters.

How does the DUPLEX 2,4 GHz system work?
After switching on the transmitter and the receiver, the transmitter automatically acknowledges the receiver, and then both select free channels in the 2.4GHz band. The DUPLEX system then collects data on each channel selected for transmission integrity in relation to signal intensity, number of errors corrected, aerial position etc. If any channel is considered to be unfit for use, the channel is then changed to a new one by the DUPLEX system (and then channel hops as necessary). The DUPLEX system checks channel before starting transmit to minimise potential clashes with other transmitters (or with other systems used on the 2.4GHz band), which allows common operation of more transmitters simultaneously.

The DUPLEX Rx receiver
Line is assigned to operate with the transmitter modules DUPLEX Tx in the 2.4GHz band. The fully digital bidirectional communication between transmitter and receiver contributes to the development of new chances in the model remote control branche.

DUPLEX receivers are not only following up with the JBC receiver line by keeping up their univerzality and broad functional extent, but they additionally extend these functions due to the feasibility of the new DUPLEX system. One of the most important advantages is the operation without crystals – watching frequencies is a thing of the past, high interference resistance, far out of visibility range and continual control of model conditions in the air as well as many other functions are new and formerly unknown features.

DUPLEX Tx transmitter modules
Along with DUPLEX Rx receceivers constitute the base of a complex system working in the 2.4GHz band, assigned to remote control of models. These modules may be installed into transmitters which in a convenient way transmit stick and control element positions. Recently most of available transmitters working with PPM mode are suitable for this purpose.

DUPLEX Tx modules work up data of the transmitter control elements and send them to the corresponding (paired) receiver. Simultaneously they exchange service and telemetric informations with the receiver and take in turn advantage of them for operation optimization.

In order to take full advantage of the DUPLEX system it is advisable to connect the universal terminal JETIBOX to the transmitter module. This way you will be able to adjust easily requested parameters and to display data of transmitter, receiver as well as data of connected telemetric or diagnostic equipment. Another item of the TX-modules is indication of the complete system condition by means of sound signals.

Transfer of telemetric data in real time:
The JETIBOX terminal can be connected to the receiver or transmitter module to measure data. A valuable option is to connect the JETIBOX to the transmitter module and receive data wirelessly from the receiver and any sensors connected to it. Every DUPLEX receiver transmits the receiver battery voltage in real time. It is possible to set an audible warning which is activated by the voltage dropping below a pre-set limit. It is possible to connect a number of telemetric sensor to each receiver.
The Jeti Telemetric sensors can also be connected directly to the JETIBOX. For example, connecting the MUI sensor to the JETIBOX creates both a voltmeter and ammeter.


temporarily out of stock
temporarily out of stock

Reviews

Customers who bought this product also purchased
Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg
Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg

temporarily out of stock
temporarily out of stock

Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
    2,4 GHz antenna exit guides
    Transmitters accesories
    Transmiters->
    Receivers->
      Acc/ Telemetria Jeti
      Compatible
      FUTABA
      Graupner
      Hacker
      Hitec
      Jeti
      Mikado
      Multiplex
      PowerBox CORE
      RadioLink
      RCM Pelikan
      Schulze->
    2,4GHz Modules->
    Crystals->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Surprise XII Rudder (Freudenthaler)
1 x Surprise XII Horizontal Estabilizer (Freudenthaler)
1 x Fascination 3600 mm ARC
1 x BIG MOSNTER
1 x Astra (Top Model)
3 x IKURA GPS 4.28 m
2 x Ion Pro NG electric with flaps GREEN Fluor (JP Model)
2 x ACTIVE ARF Electric 1.995 mm
1 x ALBATROS 3.0 m (orange/white)
1 x Aero-Master Wings (Aero-naut)
1 x Aero-Master Fuselage (Aero-naut)
2 x ENIGMA ARF
3 x IKURA 4.0 m
2 x Ion Pro NG electric with flaps ORANGE (JP Model)
1 x Avia spare fouselage CF reinforced (Top Model)
2 x Challenger ARF (Top Model)
1 x Aero-Master Cabine (Aero-naut)
1 x Albatros red/white (Top Model)
1 x Albatros ,spare fuselage (Top Model)
2 x Fascination 3600 mm (Top Model)
1 x Aero-Master (Aero-naut)
2 x Flip ARF (Top Model)
1 x Fascination 3600 mm, Spare Elevator (Top Model)
1 x ASG 32 560 mm
1 x FOX 2.300 mm V2 PNP (FMS)
1 x Fournier RF-4D
1 x FUNRAY RR
1 x HERON RR
1 x Parachute P4
2 x Para-RC Trike "RC-Bullix"
1 x Trike XL motor set (motor+esc+prop)
1 x Paramotor Trike XL
2 x Wing OXY 5,0 m2
1 x LO 100 Scale 1:2 - Modellbau Bruckmann
1 x Q-12 X-light 2000 mm Electric
1 x Fascination 3600 mm, Spare Wings (Top Model)
1 x Gracia (Top Model)
1 x Fascination 3600 mm, Canopy (Top Model)
1 x XICOY X45 rail
1 x Fuselage Bags JEEMO
1 x Propeller CFK 18x19
1 x Windsock Ozone L - 700 mm
1 x Para-RC "RC-Evo-Cross" Rescue
1 x Paramotor BackPack XXS 2
1 x FOX 3000 mm, Fuselage (FMS)
1 x Para-RC Mix
1 x BABY glider drawings (Aero-naut)
1 x Propeller CFK 20x13
1 x Propeller CFK 18x9
1 x Propeller CFK 15x13 Slim
1 x Propeller CFK 20x13 "white"
1 x Q-12 2000 mm Electric
1 x Siesta T tail (Topmodel)
1 x LENTUS Multiplex Fundas alas
1 x Ion Pro, Canopy (JP Model)
1 x SATORI 2 PRO V C64 F5J
1 x Avia (Top Model)
1 x IMPULSE 2 F3F
1 x TAKEO 3.6m
1 x XENON RC (Aero-naut)
1 x Navaho new design (Top Model)
1 x Motor Mega AC 16/30/01
1 x Fiberglass motor-holder for electric motors
1 x 20,5x14,5 Falcon electric V2 (40 g)
1 x Xoar Electric Beechwood Prop 24x8
1 x Wing OXY 0,5 pulgadas2
1 x Propeller MEJLIK 22x10
1 x Vess propeller 11x7 S
1 x Motor OS MAX 160 AX
1 x Motor OS 46 AX II
1 x Motor OS MAX 120 AX
1 x Motor OS 3805-1200 electric
1 x Motor OS 37 SZ-H
1 x Propeller APC 10x4.7 SF
1 x Bujia OS G5 gasolina
1 x Motor OS FS 95 V 4T
1 x Motor Mega AC 16/35/01
1 x Motor Mega AC 16/07/03
1 x Propeller APC 12x6 Electric
1 x Propeller APC 10x7 Electric
1 x Motor OS FS 75 AX
1 x Propeller APC 13x4 Electric
1 x Propeller APC 12x6 SF
1 x Motor Mega AC 16/20/02
1 x Metalic motor holder for class 550-600
1 x Size "L" motor holder for class 600
1 x Cooler motor type 280
1 x Motor mount for 1200 mm models
1 x 1804 2400KV Brushless Motor Qav 250 mini
1 x Propeller APC 10x6 Electric Pusher
1 x Motor Mega AC 16/25/04
1 x Antenna Cloverleaf 5.8 GHz Tx - Rx
1 x Propeller MEJLIK 16x11 3 Blades
1 x Propeller MEJLIK 30x12
2 x Logo 400 SE VBar
1 x VBar Control Touch, midnight black
44,246.76EUR
Manufacturers
Manufacturer Info
Jeti
Jeti Homepage
Other products
Languages
Español English
Currencies