1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
3 x Silencer kit ZG 45/62
1 x Piston ring for ZG 26SC/EI, ZG 26SCM ZG 26SLH and Zenoah G260RC/
1 x L ELBOW 90º ø 25 mm
1 x Blade holder center
1 x Head core
1 x Baering 3x8x4
1 x Screw M3x16
1 x Nut M2 securing
1 x Ball joint long
1 x Tail support (2 pcs)
1 x Blade holder upper
1 x Wheel keeper washer
1 x Nut M1,6
1 x Tail boom
1 x Motor wall
1 x Head upper part
2 x Rotor Mast
1 x Head lower part New
1 x 110 degree stainless steel bend D=18mm, widened to 20mm
1 x Motor Moki 180
1 x Pitts Muffler for D.A. 120
1 x Silencer ZG62, new version
1 x Crankshaft bearing front, DA-85, DA-100 DA-100L DA-120 DA-150 DA
1 x Prop shaft ZG 23SL and ZG 26SC
1 x Flat version carb bend for the ZG 62
1 x Motor DLE 170 cc Twin
1 x Cylinder DA-50R, DA-100, DA-100L
1 x Gasket, insulator ZG 20
1 x Carburator Moki S250
1 x Aluminium-Plate, carb>reed valve carrier, DA-85 DA-100L and DA-1
1 x Carburetor diaphragm set DA-150/170
1 x Cylinder gasket per 1 for ZG 74B/ZG 80B
1 x STANDOFF GAS ENGINE MOUNT 38 mm
1 x Canister combo DLE 111 cc
1 x DA-100 Bearing
1 x Exhaust gasket DA-60/120
1 x Light semi-synthetic Oil PUTOLINE TT (1l)
1 x LA500 rotor head core
1 x Initior Receiver FRX2 Wireless
1 x Ferrita 14x8x5.5 mm
1 x Screws flush mount M2
1 x Steel Screw M1x8 (10 pcs)
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x 5 LiPo XH>EH adapter
1 x Motor DA 60
1 x AX-60 starters (5 pcs)
1 x Red smoke bombs AX-60 (5 pcs)
1 x White smoke canister 100 g
1 x Adjustable launching hook
1 x White smoke bombs AX-60 (5 pcs)
1 x 3l Smoke oil
1 x Gates hinge 30x16 mm (2 pcs)
2 x Battery plate
1 x Rotorshape Elevator
1 x Bearing 3x6x2,5
1 x Screws M1,6x6 Allen
1 x Head spacer
1 x Raer wall
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x Aluminium red ball links M3 V1 (10 pcs)
1 x Bearing housing
1 x ABS Strip 1.5x8.0x1000 mm
1 x 4 LiPo XH>EH adapter
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x Kwik link AL M3 con Clip (2 pcs)
1 x Head core bushing
1 x Aluminium cap bolt washer M3 red (8 pcs)
1 x ABS Strip 1.5x3.0x1000 mm
1 x Adapter lead MPX/EC3
1 x Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x Aluminium wide washer M4 Red (4 pcs)
1 x 30 cm BEC cable (female)
1 x Ball link duraluminium M3 V1 (10 pcs)
2 x Plug cap with spring for ZG 38/S/SC
2 x Cylindergasket DA 170
2 x Cer clip DA-50R, DA-60 DA-100 DA-100L DA-120, 1 piece
1 x Ball bearing middle DA-120
2 x TUNED PIPE for motors up to 40-60 & 70-85 cc
2 x Stainless Steel Bend D 28x0,6mm
2 x Gasket, cylinder base for motor DA 50
2 x Ignition module ZG 38/S/SC
2 x Header ZG 45/62, "normal"
1 x Motor Mount for TITAN ZG45 and ZG62, length 72 mm
1 x Carb Carrier, red DA-85, DA-100L and DA-120
1 x Porex gasoline filter
1 x CHALLENGER Indoor
8,317.78EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies