1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | ABS 500 x 400 x 0,5 mm (white) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
1 x | ABS 500 x 400 x 1 mm (white) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Buy Perforated film 100 cm / 10 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
2 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
1 x | Propeller POWER-PROP 13x9 Izda |
1 x | LASER 73" 1.85m (05) PILOT |
1 x | DYNAMOMETER S-1580 |
2 x | Propeller APC 14x8.5 Electric Pusher |
1 x | WingFix ULTRA Black Edition |
2 x | Truck-trailer for gliders 720 x 239 mm |
2 x | Propeller balancer |
2 x | Surface Indicator Gauge Small |
1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
2 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
2 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | Vacuum pump 12 CFM |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
1 x | Paramotor Kit Camo H1.5/ Ben Red |
2 x | Central piece 42 mm 0º |
1 x | Chopped glass fibre strands 3 mm |
1 x | Soporte filtro FESTO (4 pcs) |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 2m |
1 x | Fibra de vidrio 80 g/m² (5 m x 100 cm) |
1 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
1 x | Fiberglass plate 620x540x1,0 mm |
1 x | Teflon rollers 80 mm x 15 mm Diam. |
2 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
1 x | Release film 100 cm x 50 m |
1 x | Fiberglass plate 350x150x4.0 mm |
1 x | HITEC 20 mm servo arm with ball link |
1 x | Servo MKS HBL550 |
1 x | 54 mm Futaba servo arm tandem with ball link |
1 x | Brazo Servo XTorque 52 mm HITEC 25T-6 |
1 x | Gates hinge black 30x16 mm (2 pcs) |
2 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Servo SAVOX SV-0236 MG HV |
1 x | Hitec 38 mm servo arm with ball link |
1 x | Servo SAVOX SV-1273 TG |
1 x | Futaba 38 mm servo arm |
1 x | FUTABA 20 mm servo arm with ball link |
1 x | Rudder tandem for two Futaba servos |
1 x | Servo mounting frame SV-1260MG |
2 x | Servo MKS HV69 |
1 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
1 x | 3 mm Prop Adapter M6 |
1 x | Futaba 50/60 mm servo pull-pull double arm with ball link |
1 x | MIG 29 3D RTF, Servo |
1 x | Optical RPM Sensor |
1 x | Alu servo arm double RHINO |
1 x | Soporte metal para servos |
1 x | Servo SAVOX SA-1258 TG |
2 x | Medium pin type hinge (12 uds) |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | Gates hinge 30x16 mm (2 pcs) |
2 x | Long pinned hinge (6 uds) |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | ROBART POINT HINGE 4,7mm (5 pcs) |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Hifht speed needle DA-50R/100I |
2 x | Low speed needle DA-50R/100I |
2 x | Cylinder for DA-85/170 (1 piece) |
2 x | L ELBOW DA-150 "normal" (2 pcs) |
2 x | Reed valve carrier for DA-85, DA-100L and DA-120 |
1 x | Pin hinge 39x20 mm (10 uds) |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Small pinned hinge (6 uds) |
2 x | Central piece 47 mm - 5º |
3 x | Extension 30 cm (Futaba) |
3 x | Extension 100 cm (Futaba) |
3 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
2 x | Cabel "Y" 30 cm (graupner) |
3 x | Extension 7.5 cm |
2 x | Futaba Female 40 cm extension |
2 x | Extension silicon 30 cm female (Graupner) |
3 x | Extension silicon 35 cm male (Futaba) |
2 x | Extension silicon 25 cm (Graupner) |
2 x | Cabel "Y" 15 cm |
3 x | Extension 90 cm (Futaba) |
2 x | Cable S.BUS 3 salidas 100 mm |
1 x | Servo safety connector (10 pcs) |
1 x | Servo MKS HBL380 |
1 x | Servo arms set HS-65HB/MG/5065MG |
1 x | GM Propellers Spinner Scale ø 42mm Diameter, Motor shaft ø 6mm C |
1 x | SAVOX SH 0254 servo |
1 x | Carbon servo arms for HITEC HS 65 (4 pcs) |
2 x | 3 mm Prop Adapter M6 |
2 x | 5 mm Prop Adapter M8 |
1 x | Servo RHINO pro SHV digi 4 |
1 x | Fast attachment for servos (25 pcs) |
1 x | Horizontal mounting servo holder |
1 x | 18 mm wing servo holder |
1 x | Oracover GREY Seafire Sea 2m |
1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
1 x | Oracover light Grey 2m |
1 x | Futaba 30 mm servo arm with M3 ball link |
1 x | 50 mm servo arm with bearing (2 pcs) |
1 x | Servo DITEX TD2612S |
1 x | SAVOX SH 1250 MG servo digi |
1 x | Servo holder for retract |
1 x | Hitec 30 mm servo rounded arm |
1 x | Servo SAVOX SA-1256 TG |
1 x | Servo TOPMODEL S7520 MG |
1 x | Servo SAVOX SV-1254 MG HiVolt Low Profile |
1 x | Futaba 54 mm servo arm with ball link |
1 x | Servo MKS 6100 DS |
2 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
2 x | 5 mm Prop Adapter M8 |
1 x | 2,3 mm Prop Drive Günther M4 |
1 x | 3 mm Short Prop Adapter M5 |
1 x | Plasti Dip Liquid Tape 429 ml black |
1 x | Blade holder metal LAMA |
1 x | Spray adhesive AEROFIX 2 |
1 x | Solvent Plasti Dip 1000 ml |
1 x | Presto SF Light Filler styrene-free (420 g) |
1 x | Spray EC Red 400ml |
1 x | Silicone adhesive ELASTOSIL® E4, tube/ 90 ml |
1 x | Plasti Dip Liquid Tape 429 ml orange |
2 x | L ELBOW DA-120 normal(2 pcs) |
1 x | Truck-trailer for gliders 720 x 285 mm |
1 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | LASER 260 60" V2 ARF Yellow (SkyWing) |
1 x | Propeller MENZ-S 16x6 |
1 x | Propeller MENZ-S 18x8 |
1 x | Receptor MINIMA 6S HITEC |
1 x | 6 mm Prop Adapter M8 |
1 x | DUPLEX 2.4EX MT 125 temperature sensor |
1 x | DUPLEX 2.4EX MUI 150 Sensor |
1 x | DUPLEX 2,4GHz MRPM EX |
1 x | DUPLEX 2.4 EX MBar |
1 x | OSD Telemetry sensor |
1 x | DUPLEX 2.4EX MT 300 EX |
1 x | Woodruff key for DA50/85/100/150 and DA 200 |
1 x | Reed valve for DA 50-R |
1 x | Carb Carrier, red DA-85, DA-100L and DA-120 |
1 x | Spinner fold propeller 50 mm (white spare spinner) |
1 x | Central piece 47 mm - 2,5º |
1 x | Cylinder for DA-60 and DA-120 |
1 x | Spinner fold propeller 36 mm (white spare spinner) |
2 x | Futaba Female 40 cm extension |
2 x | Extension 15 cm (Futaba) |
2 x | Prolongador S-Bus JR/JR 20cm |
2 x | Extension silicon 30 cm female (Futaba) |
2 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | Propeller MEJLIK 16x11 3 Blades |
1 x | Propeller APC 12x6 Glow/Gas |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Small flex hinge (12 uds) |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | Split pin 1x8 mm (10 uds) |
1 x | Press fitting for 0,5 diam. steel cable (10 pcs) |
1 x | Cables suitable for the motor AC 28/7 |
1 x | Circlik for shaft 1.5 mm (10 pcs) |
1 x | Pin 3,0 to cable coupler M3,0 ⌀ (6 pcs) |
1 x | Pinion 11 - 3,2 mm |
1 x | FALCON 26X10 CARBON PROPELLER (GAS) |
1 x | Gear set HITEC HS-81 |
1 x | 8 mm Adapter for AXI53xx |
1 x | Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm |
1 x | Battery charging cable XT60 |
1 x | Gear set HITEC HS-55 |
1 x | Brazo servo MKS X8 Metal L:1.25/1.5 inc |
1 x | Oratex Natural White 20m |
1 x | Oratex White 2m |
1 x | Prop Shaft Adapter 5 mm "long" |
1 x | 3.2 mm Prop Adapter M6 |
1 x | 10 mm Prop Adapter M12 |
1 x | Glases Stratus |
1 x | DUPLEX 2,4GHz MRPM-AC EX |
1 x | DUPLEX 2.4EX MUI 75 |
1 x | DUPLEX 2.4EX Expander E4 |
1 x | DUPLEX 2.4EX RC Power Switch 10 |
1 x | DUPLEX MUI 30 Sensor |
1 x | MT 125 temperature sensor |
1 x | DUPLEX TGs 2,4 GHz (transmitter module) |
1 x | AddCAP 10AS capacitors |
1 x | DUPLEX 2.4EX MULi 6s M |
1 x | Crankshaft DA-120 |
1 x | BOSCH spark plug cap for DA 50-R, DA 100 and DA 150 |
1 x | Reed valve for DA-60/70 |
1 x | Carburador DA-35, DA-50R-DA-100L , VM-60/70 |
1 x | Reed valve carrier, without reed valves DA-150L/170 |
1 x | Carburator spacer block DA-50R |
1 x | 45 mm white plastic spinner for folding propeller |
1 x | Spinner fold propeller 50-55 mm (white spare spinner) |
1 x | Piston ring for DA-50R and DA-100 |
1 x | Reed valve Retainer, black rubber for DA-85, DA-100L and DA-120 |
1 x | Cylinder DA-50R, DA-100, DA-100L |
1 x | Central piece 47 mm + 5º |
1 x | Carburetor for DA150L/170 |
1 x | Central piece 62 mm 0º |
1 x | Central piece 42 mm + 2,5º |
1 x | Stainless steel silencer for DA 150/150L |
1 x | Central piece 42 mm - 5º |
1 x | Spinner fold propeller 38 mm (white spare spinner) |
1 x | Central piece 52 mm 0º |
1 x | Central piece 42 mm 0º [6 mm] |
1 x | Central piece 42 mm + 5º |
1 x | Cer clip DA-50R, DA-60 DA-100 DA-100L DA-120, 1 piece |
1 x | L ELBOW DA-120 long (2 pcs) |
1 x | Front axi for DA85/DA100/DA100L/DA120 |
1 x | Spinner plastic red propeller pleg. 30 mm / 3,2 |
1 x | Central piece 42 mm - 2,5º |
1 x | Central piece 47 mm 0º |
1 x | Steel conrod DA-50R and DA-60 |
1 x | Ignition unit for DA-70/100/120/150/170/200 |
1 x | Spinner plastic white propeller pleg. 30 mm / 3,2 |
1 x | Central piece 47 mm + 2,5º |
1 x | Spare spinner 65 mm 3-Bl |
1 x | 50 mm white plastic spinner for folding propeller |
1 x | Spare spinner 36 mm 3-Bl |
1 x | Spinner black 40-45mm |
1 x | Spinner red 40-45mm |
1 x | Pick up DA50/100/150 |
1 x | Piston pin for DA50R/DA100 |
1 x | Reed valve cage with petals for DA 100/150 |
1 x | Spinner red 36-38 mm |
1 x | Spare white 36-38 mm spinner |
1 x | Spinner black 36-38 mm |
1 x | Spare white 38-45 mm spinner |
1 x | 40 mm white plastic spinner for folding propeller |
1 x | Carb Carrier, red DA-150L/170 |
1 x | Rear crankcase DA-50R |
2 x | Premium servo extension 100cm |
2 x | Futaba male 40 cm extension |
1 x | Prolongador S-Bus JR/JR 10cm |
2 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
2 x | Extension silicon 30 cm male (Graupner) |
1 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
1 x | Extension silicon 50 cm (Graupner) |
1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
2 x | Premium servo extension 75cm |
1 x | Extension silicon 50 cm (Futaba) |
2 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
2 x | Extension silicon 10 cm (Graupner) |
2 x | Extension lead 15 cm Multiplex |
1 x | Extension silicon 25 cm (Futaba) |
2 x | Extension silicon 10 cm (Futaba) |
2 x | Extension silicon 30 cm male (Futaba) |
1 x | Extension silicon 75 cm (Graupner) |
2 x | Premium servo extension 50cm |
1 x | Extension silicon 100 cm (Graupner) |
2 x | Extension silicon 100 cm (Futaba) |
2 x | Circlick securite |
1 x | Extension silicon 75 cm (Futaba) |
1 x | Extension PVC 150 cm (Graupner) |
1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
1 x | Cable S.BUS 3 salidas 300 mm |
1 x | Extension silicon 35 cm (Futaba) |
1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
2 x | Premium servo extension 25cm |
1 x | Helice CLASSIC-Prop 20x10 |
1 x | Propeller MASTER 7x4 |
1 x | Propeller POWER-PROP 16x8 |
1 x | Propeller POWER-PROP 15x10 |
1 x | Aluminium servo arm (2 uds) |
1 x | 25 mm carbon servo arm |
1 x | Propeller MEJLIK 30x12 |
1 x | HITEC DPC-11 programmer |
1 x | 6 mm Prop Adapter M8 |
1 x | Quicklock washer 1 mm (10 pcs) |
1 x | 3,2 mm Prop Adapter M5 |
1 x | Flat washer 1.7 mm (20 pcs) |
1 x | Quicklock washer 2.5 mm (10 pcs) |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Lock washer 2.7 mm (20 pcs) |
1 x | Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs) |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | Spring pin Ø 2 x 6 mm (10 pcs) |
1 x | Round flex hinge (12 uds) |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | Spring pin Ø 1 x 6 mm (10 pcs) |
1 x | Snap short M2 (10 uds) |
1 x | Pinion 15 - 3,2 mm |
1 x | Pin 2,5 to cable coupler M2,5 ⌀ pin 2,5 (6 pcs) |
1 x | Snap for floding prop for 2 mm axi |
1 x | Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs) |
1 x | Pinion 15 - 3,2 mm |
1 x | Micro control horn (2 pcs) |
|
14,499.76EUR |