Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


under request
under request

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
What's New?
Servo GO-1006MG (0.052s/60º, 3.0Kg)
Servo GO-1006MG (0.052s/60º, 3.0Kg)
52.00EUR
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Shopping Cart
1 x Extinguisher CO2 - 2 Kg
1 x M3 INDUSTRIAL ball link (2 uds)
1 x M2,5 Diam metal ball link V3 (2 pcs)
1 x Ball link M3 (10 pcs)
1 x Long ball link M2 (6 uds)
1 x Socket head long ball link M3 (6 uds)
1 x Joint with bearing M3 22x5,5
2 x Short ball link M1.6 (6 uds)
1 x M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x 6 mm hexagonal ball link M3 (10 pcs)
1 x Short ball link M3 (6 uds)
1 x Ball link M1.6 (6 uds)
1 x Joint with bearing M2,5 22x5,5
1 x Long ball link M3 (6 uds)
1 x Ball link M2,5 (10 pcs)
1 x M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x Ball link M3 RPA's-UAV's
1 x Socket head ball link M3 (2 uds)
1 x M2,5 5Diam black ball link V2 (2 pcs)
1 x M2,5 Diam metal short ball link V3 (2 pcs)
1 x Short ball link M2 (6 uds)
1 x M2 5Diam black ball link V2 (2 pcs)
2 x Socket head long ball link M3 (2 uds)
1 x M3 Maxi ball link (2 uds)
1 x M3 Maxi ball link (2 uds)
1 x Ball link M3 (10 pcs, flat ball)
1 x M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x Round Rod 6,0x1000 mm
2 x ABS Strip 1.0x3.0x1000 mm
1 x Round Rod 2,0x1000 mm
1 x Strip 1,5x1,5x330 mm
1 x Round Rod 2,5x1000 mm
1 x RF9 Flight Simulator with Spektrum Controller
2 x CC 02
1 x TP/TopFuel - XH 2/3S Adapter
1 x BEC 3A FOXY
2 x ABS I Strip 10x5x1000 mm
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Strip ABS 2.0x5.0x1000 mm
1 x Interface Realflight Simulator
1 x Strip ABS 2.0x10.0x1000 mm
1 x Slave-cable USB Easy Sim
3 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x Simulador RealFlight RF-9.5 S (sin emisora)
1 x MPX-Dean "T" Adapter
1 x Strip 2,0x2,0x330 mm
1 x Bec MR UBEC 5A (5v/6v/7v)
2 x Strip ABS 2.0x8.0x1000 mm
1 x USB HLS prog. interface
2 x Round Rod 4,0x1000 mm
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x Round Rod 5,0x1000 mm
1 x Adapter lead MPX/XT60
1 x 30 cm BEC cable (female)
1 x 5 LiPo XH>EH adapter
1 x Strip 2,5x1,25x330 mm
2 x Copper lacquer wire Ø0,2 mm (5 m)
1 x APM2.6 Power module with 5.3V DC BEC
1 x ABS Strip 1.5x2.0x1000 mm
2 x "Y" charging 4mm wire (2 IN-1 OUT).
2 x ABS Strip 1.0x4.0x1000 mm
1 x Adapter lead MPX/EC3
2 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x 2 LiPo XH>EH adapter
1 x ABS I Strip 20x10x1000 mm
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x Canopy Latch
1 x Cierre cabina aluminio Ø4, I=10 mm
1 x Steering arm 16 mm Ø 3 mm
1 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Stainless steel cable Ø 0.62 mm (10 m)
1 x Screw-lock connector M2 (2 uds)
1 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x Stainless steel cable Ø 0.5 mm (10 m)
1 x 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
2 x Fast'n EZ-CA-Hinge, lite (12 uds)
2 x Long pinned hinge (12 uds)
3 x Gates hinge black 30x16 mm (2 pcs)
2 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
2 x Gates hinge
1 x Flap hinge (6 pcs)
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x Nylon hinge 15x0,3 (10 pcs)
2 x 67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
2 x Pin type hinge Al 4,5x70 mm (2 pcs)
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x 18 mm reinforced hinge
2 x Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x 67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x Pin type hinge Al 6x98 mm (2 pcs)
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Nylon hinge 20x15x0,3 (10 pcs)
1 x Small pinned hinge (12 uds)
1 x Pin type hinge Al 4,5x70 mm to wire (2 pcs)
2 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x Red smoke canister 100 g
1 x "S" set for planes
1 x 3l Smoke oil
1 x AX-60 starters (5 pcs)
1 x Black smoke bombs AX-60 (5 pcs)
1 x Remote electric ignition system
1 x White smoke canister 65 g
1 x Initior Receiver FRX2 Wireless
1 x PCARD Wireless System
1 x White smoke canister 100 g
1 x Ventral support for AX-18/AX-60
1 x XH female balance (5S) connector (2 pcs)
1 x Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x Monokote PLATINO metalizado (1.8x0.65m)
1 x 2,0x50 mm allen screwdriver
1 x Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x Liston HAYA 8 x 8 x 1000 mm
1 x Strip ABS 2.0x3.0x1000 mm
1 x ABS Strip 1.5x6.0x1000 mm
1 x Male connector for 6 pines AWG
2 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x 4 LiPo XH>EH adapter
2 x Male connector JST SH 1.0mm with 10 cm wire
1 x JETImodel SINGLE BEC
2 x Black copper lacquer wire Ø0,2 mm (5 m)
2 x Female connector for 16 pines AWG
1 x Pins M connect Multipin connectors AWG 20-24
1 x SBEC Jeti
1 x Opto Gas Engine Kill Switch
1 x PSC 6
1 x Female connector for 6 pines AWG
1 x Male connector for 12 pines AWG
1 x PWC6 PowerWingConnector for 6 servos with fuselage socket
1 x Extension 5 lipos JST/C
1 x PowerBox SparkSwitch RS
1 x Interruptor SAFET-SWITCH 12HV Twinbatt
1 x Multi-adapter balancer JST/C - TP
1 x SPARK Switch 7.4v
1 x Male connector for 10 pines AWG
1 x Extension 2/3 lipos JST - JST/C
1 x Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
2 x Micro Switch button
1 x SPS 70V 100/200 A
1 x Prolonguer for Balancer Thunder Power 6S
1 x Male connector for 20 pines AWG
1 x wing/fuselage connector for 12 pines AWG 20-24
2 x Selfstart electronic switch
2 x Cabel charger transmitter GRAUPNER
2 x 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Joint with bearing M2 22x5,5
1 x Futaba External voltage input cable Futaba CA-RVIN-700
1 x Strip 3,5x1,75x330 mm
1 x 15 mm reinforced hinge
1 x Pin hinge 39x20 mm (10 uds)
1 x Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs)
1 x Miniature brass strap hinge, 1 m
1 x Nylon hinge for flaps 33x9 (2 pcs)
1 x Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs)
2 x SPARK Switch 12v
1 x Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs)
1 x Pin hinge 34x16 mm (10 uds)
1 x Pin hinge 26x11 mm (10 uds)
1 x Gates hinge aluminium (1 pcs)
1 x Fast'n EZ-CA-Hinge (12 uds)
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x Micro flex hinge (12 uds)
1 x Round flex hinge (12 uds)
1 x Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs)
2 x Large flex hinge (12 uds)
1 x Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs)
1 x Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs)
3 x Robart Door Hinge (Pk2)
1 x 25 mm reinforced hinge
2 x ESC ALPHA 60A HV
1 x TrainerCord (master-learner)
1 x CC 11 Conector
1 x Parachute XTRALITE S
1 x ALPHA 1000mm BL ARTR
1 x QUANTUM II 55 Brushless Motor
2 x JSM U/C Leg Springs for XCALIBUR (Pr) (6-12Kg)
1 x 700 ml complete glow fuel tank
1 x 3 LiPo XH>EH adapter
1 x Tyres 70 mm Xclaibur (2 pcs)
1 x XCALIBUR Fuel Tank with built in UAT
1 x ESC Ripmax QUANTUM 80A SBEC
1 x Servo HITEC HS-5085 MG Digi
1 x Servo HITEC D-955 TW Titanium
1 x Servo HITEC HS-45 HB
1 x Servo HITEC HS-5485 HB Digi
1 x FX three-position switched channel, long
1 x Connector CAN 15
1 x SPARK Switch 5.9v
1 x DPS Switch JR/JR
1 x Brazo servo aluminio HITEC HS-125MG/5125MG
1 x wing/fuselage connector for 16 pines AWG 20-24
1 x Short Switch On/Off micro
2 x Medium pin type hinge (12 uds)
1 x SPS 70V 140/280 A
1 x Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x FALCON 20X9 CARBON PROPELLER (GAS)
1 x EasyFLY Addon
1 x Connectors DEANS (T) micro
1 x Propeller MEJLIK 32x12 EVO
1 x Propeller MEJLIK 28.5x12 S-3 Blades
1 x Propeller APC 11x5 Glow/Gas
1 x Propeller MEJLIK 23x8 CFK
1 x Horn 6/35 with M3 Bearing
1 x EXTRA 330SC-E 95" Orange/Blue/White
1 x EXTRA 300 78" V3 Orange/Blue
1 x EXTRA NG 85" 2159mm yellow/blue
1 x Sukhoi 29S 2,2 m V2 YELLOW/BLACK (SebART)
1 x LightBox SR
1 x 3,2 mm Prop Adapter M5
1 x Connectors banna gold 5,5 mm (M/F)
1 x Propeller POWER-PROP 11x9
1 x MASTER 16x10 tree blades propeller
1 x Propeller POWER-PROP 15x10
1 x FALCON 24X12 CARBON PROPELLER (GAS)
1 x Unmounted aluminium pin 6x98 mm (2 pcs)
2 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x PPM Encoder Module
1 x EXTRA NG 85" 2159mm red/white
1 x Digital Air Speed Sensor And Pitot Tube Set
10,445.86EUR
Manufacturers
Manufacturer Info
Saito
- Other products
Notifications
NotificationsNotify me of updates to SAITO FG-120 TSS Boxer 4T
Reviews
Write ReviewWrite a review on this product!
Languages
Español English
Currencies
Insurance
multiseguros


Copyright © 2024 ROI Import
Powered by osCommerce