Top » Catalog » Sailplanes » Electric » TM020100T

398.00EUR

Albatros red/white (Top Model)
[TM020100T]

The Albatros is one of the most beautiful combinations of classic design and modern technology. The nostalgic shape is perfectly blended with modern building techniques to create an electric sailplane that performs as well as it looks. The white gel-coated fiberglass fuselage combined with classic balsa/ply D-tube wing and carbon/balsa built up tail parts come together to make the Albatros a strong and light model. Do not be fooled by the its retro looks. This model was designed and built to be a 21st century favorite. With its flap equipped, 3 piece wing and full flying elevator the Albatros is one of the most impressive models that we have seen in quite some time. Each part is carefully handcrafted with meticulous attention to every detail. As soon as you open the box, you will find the Top Model build quality that we have come to expect.

Virtually perfect, extremely elegant combination of classic design and modern technology.

The fuselage is reinforced with carbon!

The model is designed and manufactured in Czech Republic. Spare parts are in stock.

The kit contains:
- Elegant gel-coated white fiberglass fuselage and canopy.
- Three-pieces wing with ailerons and oversized flaps.
- Removeable tail surfaces with carbon spar and leading edge.
- Rear carbon sub spar for added wing strength.
- Expertly covered with Oracover.
- Includes all necessary hardware.
- Virtually perfect, extremely clean and well made.
- Complete assembly manual with step by step illustrations.

temporarily out of stock

Reviews

Customers who bought this product also purchased

MPX Sub-D Adaptor temporarily out of stock	Propeller Pleg CAM Carbon 12.5x7.5 temporarily out of stock	Spinner propeller pleg. 40 mm / 5,0 mm temporarily out of stock
Gracia (Top Model) temporarily out of stock

Quick Find

Shopping Cart

1 x	Extinguisher CO2 - 2 Kg
1 x	M3 INDUSTRIAL ball link (2 uds)
1 x	M2,5 Diam metal ball link V3 (2 pcs)
1 x	Ball link M3 (10 pcs)
1 x	Long ball link M2 (6 uds)
1 x	Socket head long ball link M3 (6 uds)
1 x	Joint with bearing M3 22x5,5
2 x	Short ball link M1.6 (6 uds)
1 x	M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x	6 mm hexagonal ball link M3 (10 pcs)
1 x	Short ball link M3 (6 uds)
1 x	Ball link M1.6 (6 uds)
1 x	Joint with bearing M2,5 22x5,5
1 x	Long ball link M3 (6 uds)
1 x	Ball link M2,5 (10 pcs)
1 x	M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x	Ball link M3 RPA's-UAV's
1 x	Socket head ball link M3 (2 uds)
1 x	M2,5 5Diam black ball link V2 (2 pcs)
1 x	M2,5 Diam metal short ball link V3 (2 pcs)
1 x	Short ball link M2 (6 uds)
1 x	M2 5Diam black ball link V2 (2 pcs)
2 x	Socket head long ball link M3 (2 uds)
1 x	M3 Maxi ball link (2 uds)
1 x	M3 Maxi ball link (2 uds)
1 x	Ball link M3 (10 pcs, flat ball)
1 x	M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x	Round Rod 6,0x1000 mm
2 x	ABS Strip 1.0x3.0x1000 mm
1 x	Round Rod 2,0x1000 mm
1 x	Strip 1,5x1,5x330 mm
1 x	Round Rod 2,5x1000 mm
1 x	RF9 Flight Simulator with Spektrum Controller
2 x	CC 02
1 x	TP/TopFuel - XH 2/3S Adapter
1 x	BEC 3A FOXY
2 x	ABS I Strip 10x5x1000 mm
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	Strip ABS 2.0x5.0x1000 mm
1 x	Interface Realflight Simulator
1 x	Strip ABS 2.0x10.0x1000 mm
1 x	Slave-cable USB Easy Sim
3 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	Simulador RealFlight RF-9.5 S (sin emisora)
1 x	MPX-Dean "T" Adapter
1 x	Strip 2,0x2,0x330 mm
1 x	Bec MR UBEC 5A (5v/6v/7v)
2 x	Strip ABS 2.0x8.0x1000 mm
1 x	USB HLS prog. interface
2 x	Round Rod 4,0x1000 mm
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	Round Rod 5,0x1000 mm
1 x	Adapter lead MPX/XT60
1 x	30 cm BEC cable (female)
1 x	5 LiPo XH>EH adapter
1 x	Strip 2,5x1,25x330 mm
2 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	ABS Strip 1.5x2.0x1000 mm
2 x	"Y" charging 4mm wire (2 IN-1 OUT).
2 x	ABS Strip 1.0x4.0x1000 mm
1 x	Adapter lead MPX/EC3
2 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	2 LiPo XH>EH adapter
1 x	ABS I Strip 20x10x1000 mm
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Canopy Latch
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Steering arm 16 mm Ø 3 mm
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Stainless steel cable Ø 0.62 mm (10 m)
1 x	Screw-lock connector M2 (2 uds)
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
2 x	Fast'n EZ-CA-Hinge, lite (12 uds)
2 x	Long pinned hinge (12 uds)
3 x	Gates hinge black 30x16 mm (2 pcs)
2 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
2 x	Gates hinge
1 x	Flap hinge (6 pcs)
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Nylon hinge 15x0,3 (10 pcs)
2 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
2 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	18 mm reinforced hinge
2 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Small pinned hinge (12 uds)
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
2 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Red smoke canister 100 g
1 x	"S" set for planes
1 x	3l Smoke oil
1 x	AX-60 starters (5 pcs)
1 x	Black smoke bombs AX-60 (5 pcs)
1 x	Remote electric ignition system
1 x	White smoke canister 65 g
1 x	Initior Receiver FRX2 Wireless
1 x	PCARD Wireless System
1 x	White smoke canister 100 g
1 x	Ventral support for AX-18/AX-60
1 x	XH female balance (5S) connector (2 pcs)
1 x	Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x	Monokote PLATINO metalizado (1.8x0.65m)
1 x	2,0x50 mm allen screwdriver
1 x	Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	Male connector for 6 pines AWG
2 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	4 LiPo XH>EH adapter
2 x	Male connector JST SH 1.0mm with 10 cm wire
1 x	JETImodel SINGLE BEC
2 x	Black copper lacquer wire Ø0,2 mm (5 m)
2 x	Female connector for 16 pines AWG
1 x	Pins M connect Multipin connectors AWG 20-24
1 x	SBEC Jeti
1 x	Opto Gas Engine Kill Switch
1 x	PSC 6
1 x	Female connector for 6 pines AWG
1 x	Male connector for 12 pines AWG
1 x	PWC6 PowerWingConnector for 6 servos with fuselage socket
1 x	Extension 5 lipos JST/C
1 x	PowerBox SparkSwitch RS
1 x	Interruptor SAFET-SWITCH 12HV Twinbatt
1 x	Multi-adapter balancer JST/C - TP
1 x	SPARK Switch 7.4v
1 x	Male connector for 10 pines AWG
1 x	Extension 2/3 lipos JST - JST/C
1 x	Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
2 x	Micro Switch button
1 x	SPS 70V 100/200 A
1 x	Prolonguer for Balancer Thunder Power 6S
1 x	Male connector for 20 pines AWG
1 x	wing/fuselage connector for 12 pines AWG 20-24
2 x	Selfstart electronic switch
2 x	Cabel charger transmitter GRAUPNER
2 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Joint with bearing M2 22x5,5
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
1 x	Strip 3,5x1,75x330 mm
1 x	15 mm reinforced hinge
1 x	Pin hinge 39x20 mm (10 uds)
1 x	Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs)
1 x	Miniature brass strap hinge, 1 m
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs)
2 x	SPARK Switch 12v
1 x	Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs)
1 x	Pin hinge 34x16 mm (10 uds)
1 x	Pin hinge 26x11 mm (10 uds)
1 x	Gates hinge aluminium (1 pcs)
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Micro flex hinge (12 uds)
1 x	Round flex hinge (12 uds)
1 x	Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs)
2 x	Large flex hinge (12 uds)
1 x	Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs)
3 x	Robart Door Hinge (Pk2)
1 x	25 mm reinforced hinge
2 x	ESC ALPHA 60A HV
1 x	TrainerCord (master-learner)
1 x	CC 11 Conector
1 x	Parachute XTRALITE S
1 x	ALPHA 1000mm BL ARTR
1 x	QUANTUM II 55 Brushless Motor
2 x	JSM U/C Leg Springs for XCALIBUR (Pr) (6-12Kg)
1 x	700 ml complete glow fuel tank
1 x	3 LiPo XH>EH adapter
1 x	Tyres 70 mm Xclaibur (2 pcs)
1 x	XCALIBUR Fuel Tank with built in UAT
1 x	ESC Ripmax QUANTUM 80A SBEC
1 x	Servo HITEC HS-5085 MG Digi
1 x	Servo HITEC D-955 TW Titanium
1 x	Servo HITEC HS-45 HB
1 x	Servo HITEC HS-5485 HB Digi
1 x	FX three-position switched channel, long
1 x	Connector CAN 15
1 x	SPARK Switch 5.9v
1 x	DPS Switch JR/JR
1 x	Brazo servo aluminio HITEC HS-125MG/5125MG
1 x	wing/fuselage connector for 16 pines AWG 20-24
1 x	Short Switch On/Off micro
2 x	Medium pin type hinge (12 uds)
1 x	SPS 70V 140/280 A
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	FALCON 20X9 CARBON PROPELLER (GAS)
1 x	EasyFLY Addon
1 x	Connectors DEANS (T) micro
1 x	Propeller MEJLIK 32x12 EVO
1 x	Propeller MEJLIK 28.5x12 S-3 Blades
1 x	Propeller APC 11x5 Glow/Gas
1 x	Propeller MEJLIK 23x8 CFK
1 x	Horn 6/35 with M3 Bearing
1 x	EXTRA 330SC-E 95" Orange/Blue/White
1 x	EXTRA 300 78" V3 Orange/Blue
1 x	EXTRA NG 85" 2159mm yellow/blue
1 x	Sukhoi 29S 2,2 m V2 YELLOW/BLACK (SebART)
1 x	LightBox SR
1 x	3,2 mm Prop Adapter M5
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	Propeller POWER-PROP 11x9
1 x	MASTER 16x10 tree blades propeller
1 x	Propeller POWER-PROP 15x10
1 x	FALCON 24X12 CARBON PROPELLER (GAS)
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
2 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	PPM Encoder Module
1 x	EXTRA NG 85" 2159mm red/white
1 x	Digital Air Speed Sensor And Pitot Tube Set

10,445.86EUR