Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Controlador tren/frenos ER-150 V2
55.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	LH long aluminium horn L31xH30 (2pcs)
1 x	Horn 6/27 with M3 Bearing
1 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	20 mm carbon horn
2 x	Threaded coupler ALU M2 Ø 3 (2 uds)
3 x	Horn 6/35 with M3 Bearing
3 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
2 x	Horn 13,5x16 mm (2 pcs)
2 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
2 x	6 mm aluminium horn with patella
2 x	Small aluminium horn gold (2pcs)
1 x	Horn 6/20 with M3 Bearing
2 x	RH long aluminium horn (2pcs)
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Brass control horn M4 short for wire (4 pcs)
2 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	Small aluminium horn blue (2pcs)
1 x	Cable control set
1 x	Brass control horn M4 short for wire (10pcs)
2 x	Brass control horn M2 short for wire (2 pcs)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	6 mm blue aluminium threaded horn with patella
1 x	Horn 16,5x20 mm (2 pcs)
1 x	Quicklock washer 1 mm (10 pcs)
1 x	Flat washer 2.2 mm (20 pcs)
2 x	Aluminium cap bolt washer M4 green (8 pcs)
1 x	M3-M4 rubber washer (8 pcs)
2 x	Aluminium wide washer M3 gold (4 pcs)
1 x	Aluminium cap bolt washer M3 red (8 pcs)
1 x	Aluminium wide washer M4 Red (4 pcs)
1 x	Flat washer 4.3 mm (20 pcs)
1 x	Lock washer 2.7 mm (20 pcs)
1 x	Lock washer 2.2 mm (20 pcs)
2 x	Aluminium wide washer M4 Blue (4 pcs)
2 x	Spring lock washer 3.1 mm (20 pcs)
2 x	M3 black washers (4 pcs)
1 x	Circlik for shaft 1.5 mm (10 pcs)
2 x	Circlik for shaft 2.3 mm (10 pcs)
1 x	Bungee HLG Premium
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	Profile ABS Square 3 x 1000 mm
1 x	Futaba Female 40 cm extension
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	2 mm female connector (2 pcs) with safety connector
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Short ball link M3 (6 uds)
1 x	Paint gun for sprays
1 x	PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x	Red smoke canister 140 g
1 x	Boxed KIT OF 7 Rotary Burrs FINE
1 x	Dremel PERMAGRIT 18 mm round lime
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	Horn F3A de Titanium 16 mm (2 units)
1 x	Indoor hinge with servo arm integraded
1 x	6 mm M3 variable inclined horn
1 x	Set Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	6 mm M3 variable horn
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch
1 x	SlowFlyer control horn (3 pcs)
2 x	Long adjustable control horn 3x34
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
2 x	Brass control horn M2 large for wire (2pcs)
2 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm
1 x	Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6
1 x	Rudder forward 80x28 "type Kato"
1 x	5 mm M2 variable inclined horn
1 x	Micro control horn T2 Ø 1
1 x	Control horn long w/ball
1 x	Small control horn with bearing (2 pcs)
1 x	Cable with accesories
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm
1 x	Brass control horn M4 long for wire (4 pcs)
3 x	Small aluminium horn red (2pcs)
1 x	Jet Afterburner Simulator NF-Jet1RY Set
1 x	LED wire (green - 2pcs)
1 x	LED blink wire flashing (blue - 2pcs)
1 x	Propeller POWER-PROP 7x7
2 x	Horn 20x28,5 mm (2 pcs)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	LED wire (rojo - 2pcs)
2 x	LED wire (orange - 2pcs)
1 x	Glow Plug Clip 1.3 Ah
1 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 black pcs)
1 x	Titanium M3x0,5x6 mm Flat Head screw (4 pcs)
1 x	Blind nut M4 (4 pcs)
1 x	Titanium M3x0,5x8 mm Flat Head screw (4 pcs)
1 x	Servo M2x5/16 screw (4 pcs)
1 x	15 mm floating pad (30 pcs)
1 x	Blind nut M5 (4 pcs)
1 x	Socket Head Screw M2x5
1 x	Threaded insert M6 (10 pcs)
1 x	Tapping Screw M2.9x13 (10 pcs)
1 x	Blind nut M6 (4 pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 lilac pcs)
1 x	Tapping Screw M2.9x9.5 (10 pcs)
1 x	10 mm floating pad (72 pcs)
1 x	Anodized aluminium servo M3x16 screw (4 red pcs)
1 x	Program card KAVAN PRO
1 x	Motor OS 3820-1200 electric
1 x	Horn 5/10 with M2 Bearing
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
1 x	Support ECU Xicoy X-45
1 x	Support Filtro FESTO
1 x	Reed valve for DA 50-R
1 x	Horn with ball 55x40
1 x	Horn mando long (2 pcs)
1 x	Horn DU-BRO 1/2 (2 pcs)
1 x	Crystal Universal RX 35.120 Ch 72
1 x	Crystal Universal RX 35.130 Ch 73
1 x	EasyFLY Addon
1 x	IPACS Aerofly Professional Expansion Pack Vol. 1 PC-DVD
1 x	PPS-4D Propeller
1 x	Support hands Issuer PROFI TX
1 x	Motor Mount for TITAN ZG45 and ZG62, length 54 mm
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Cylinder ZG 26SC/SLH
1 x	Support Pitot JETI
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	CHALLENGER Indoor
1 x	FUNRAY RR
1 x	Magnetic Interruptor MULTIPLEX
1 x	Antenna MULTIPLEX 2.4 GHz 400mm RX-9/12/16-DR pro
1 x	Power MULTIlight
1 x	LED blink wire flashing (white - 2pcs)
1 x	LENTUS Multiplex Propeller 8x6
1 x	Servo M2x7/16 screw (4 pcs)
1 x	Titanium M3x0,5x12 mm Flat Head screw (4 pcs)
1 x	Aluminium cap bolt washer M3 black (8 pcs)
2 x	Circlik for shaft 1.2 mm (10 pcs)
1 x	Quicklock washer 3 mm (10 pcs)
1 x	Soporte filtro FESTO (4 pcs)

2,529.71EUR