1,744.00EUR

Motor DA 150
[TC5800]



Vista frontal del modelo

Cota del DA 150
First glimpse of the DA 150 is very satisfying due to it’s high quality finish. The cylinders, pistons and crankshaft are not from industrial sources but specially designed by Desert Aircraft and manufactured by specialist companies exclusively for DA.

The long conrod with the gudgeon pin mounted very near the piston crown allows the high torque output to be transferred with the minimum of piston side thrust, thereby reducing drag and wear.

The totally normal DA 150 has a higher output than the Special Edition 160cc engine from another manufacturer.

With the first place in 1999 World Aerobatic Masters as well as the TOC 2000, the DA 150 has proved it’s superiority in choice as a power unit for large aerobatic models.

To show what pilots using DA engines can achieve is the end results in the last TOC, 1st and 2nd place went to DA engines. 15 from the 21 entrants used DA engines, 14 from these used the DA 150. Champion was Chip Hyde with the DA 200, this engine is only in the development stage at the present time.

Steve Holland deservedly won the best of show award at the 2003 la Ferté-Alais, with such a realistic and elegant flight performance I have never seen before. The DA 150 pulls the 30 kilo, half-scale Zlin 526 effortlessly through all manouvers.

The piston, conrod and crankshaft has been designed with a computer simulation programme. These parts are perfectly balanced and harmonized to each other. The DA 150 has the lowest vibration levels possible over the entire throttle range.

The most prominent feature, as is the case with the DA 100, is the very long crankcase. The third bearing sits right behind the propellor hub. The very long and stiff crankshaft housing makes installation easy.

Every single crankcase is CNC milled from the solid in high tensile aircraft aluminium 7075-T6. In comparison to die casting a vastly more expensive process in time and materials. The CNC method has the very distinct advantage over die casting in that tolerances are very much closer and ensures a perfect alignment of the crankshaft as well as an overall greater stiffness and strength. All requirements for a high performance long life engine. You must agree upon seeing the DA 150 that it looks so good, it is a pity to cover it up with a cowl.

The reliable Desert Aircraft battery ignition unit has of course automatic advance and retard that makes starting so very easy and ensures maximum power. This unit is completely screened.

Features:
- Computer Simulation designed high performance engine with very high torque output.
- Crankcase CNC milled from high tensile aircraft aluminium.
- The cylinder, piston and crankshaft is developed by Desert Aircraft.
- Long conrod with gudgeon pin set very near piston crown for reduced side load.
- Unusually low vibration due to computer simulation aided design.
- 4 Leaf flutter valves.
- Battery ignition with automatic advance and retard.
- Rapid spares delivery and repairs service from Germany by Toni Clark practical scale GmbH.
- 5 years Guarantee!


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Truck-trailer for gliders 720 x 239 mm
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Piloto JET 1:3,5
1 x Spring lock washer 2.6 mm (20 pcs)
1 x Aluminium cap bolt washer M3 blue (8 pcs)
1 x ABS Strip 1.0x5.0x1000 mm
1 x Ventus 1:4 set of instruments
1 x Battery LiPo GENS 3300 mAh 6S 22.2v 45C (Gens Ace)
1 x Battery LiPo GEN2700 mAh 3S 11.1v Transmitter Pack (Gens Ace)
1 x Carbon fiber rod 0.5 mmx1000 mm
2 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Bec MR UBEC 5A (5v/6v/7v)
2 x SE Ring 400 mm (2 pcs)
2 x L-Connector 1.5 mm x 1000 mm
1 x Xplorer1 anemometro
1 x Battery bed V2_S (black)
2 x Battery LiPo GENS 2600 mAh 2S 7.4v Transmitter Pack (Gens Ace)
1 x SE Ring HACKER 300 mm (2 pcs)
2 x Battery LiPo GENS 2200 mAh 2S 7.4v 60C (Gens Ace)
1 x ABS Strip 1.5x2.0x1000 mm
1 x Profile ABS half cane 4x2.5x1000 mm
1 x Couple M4 for wire (10 pcs)
1 x Screws M1,6x6 Allen
1 x 6,4x1000 mm 2:1 black termoretract tube
1 x Profile ABS half cane 2.0x1000 mm
1 x Carbon fiber rod 12 mm x 1000 mm
1 x Strip 2,5x1,25x330 mm
1 x SE Ring 240 mm (2 pcs)
1 x Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x 1 m servo "Premium" wire (white/red/blue)
1 x Battery LiPo GENS 5000 mAh 6S 22.2v 45C (Gens Ace)
2 x ABS "T" angle 8.0x8.0x1000 mm
1 x Battery LiPo GENS 5000 mAh 4S 14,8V 40C (Gens Ace Hard Case)
1 x Strip ABS 2.0x10.0x1000 mm
1 x Cinta Goldfix 1m
1 x MYLAR film A350 (1000x500 mm)
1 x Raer wall
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x Battery LiPo GENS 120 mAh 2S 7.4V 30C (Gens Ace) F3P Pack
1 x Battery LiPo GENS 5000 mAh 4S 14.8v 45C (Gens Ace)
1 x 1,6x1000 mm 2:1 red termoretract tube
2 x Foil for sticking flaps and ailerons
2 x ABS angle 10,0x10,0x1000 mm
1 x Round Rod 5,0x1000 mm
2 x Carbon fiber rod 5.0 mmx1000 mm
1 x 3 blades set
1 x Head lower part
1 x LiPo Storage Box Type "BIG"
2 x Battery LiPo GENS 4000 mAh 6S 22.2v 25C (Gens Ace)
2 x Disposable Injector Bags (30x16cm) 100 pcs
1 x Pilot LA 500
1 x Motor rotor LA-500
1 x Bateria LRP 2200-7.2v 6 cell NiMH
1 x Glases Ace
1 x Sanyo RX Battery Eneloop 6,0 V FUT
1 x Digital precision scale up to 2000 g
1 x M2 5Diam short black ball link V2 (2 pcs)
1 x Digital scale up to 40 kg
1 x RX Battery Eneloop 6,0 V JR 2500 mAh
1 x M2,5 5Diam black ball link V2 (2 pcs)
1 x Avanti XS Jet , Carrying bags (SebArt)
1 x Connectors banna oro 2 mm (M/F) (ultralight)
2 x Set wings Mini AVANTI S 1.4m W/B/R
1 x Avanti XS Jet , Tank for Keroseno (SebArt)
1 x Lipo GENS 200 mAh 1s 3.7 45C (2 pcs)
1 x Battery LiPo GENS 4000 mAh 6S 22.2v 45C (Gens Ace)
1 x 2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x Battery LiPo GENS 5000 mAh 2S 7.4V 50C (Gens Ace Hard Case)
1 x Mini AVANTI S Jet , L.Gear Electric (SebArt)
1 x Pipa 3D F-16 Scale 1/6
1 x Battery LiPo GENS 450 mAh 2S 7.4V 25C (Gens Ace)
1 x Boeing (TX) T-7A RED HAWK
1 x Mini AVANTI S Jet , Carrying bags (SebArt)
1 x PC-21 2.880 mm RAAF Sheme
2 x Jodel D.9 BeBe 2.400 mm Kit
1 x Connector CAN 15
1 x SCHOCKJET ARF 2.050 mm
1 x Conector BEC female (10 pcs)
1 x Electric Landing Gear FELIX SporJet 2.200mm
1 x Connectors banna oro 6,0 mm (M/F)
1 x 800TVL CMOS camera for FPV
1 x Avanti S Jet , Field folding model stand (SebArt)
1 x Battery LiPo GENS 450 mAh 3S 11.1V 25C (Gens Ace)
1 x MB339 Freece PNP 1790 mm
1 x Battery Lipo GENS 4000 mAh 7.4v TX
1 x F-16 Scale 1/6 G3 Airex Deco: AF 916F
1 x JEEMO Kit ARF Basic (2 color) - XTRALIGHT
1 x Battery LiPo GENS 4800 mAh 5S 18.5V 18C (Gens Ace)
1 x Battery LiPo GENS 4000 mAh 2S 7,4v RX (Gens Ace)
1 x FELIX JR Red/Yellow 1750 mm
1 x Battery LiPo GENS 5000 mAh 3S 11.1v 45C (Gens Ace)
1 x Gold antispark 4 mm plug
1 x PC-21 2880 mm Tren aterrizaje electrico(Electron Retracts
1 x XH male balance (3S) connector (2 pcs)
1 x BLANIK 50 V2 Silver/Blue (SebArt), cabina
1 x Connectors banna oro 3,5 mm (M/F)
1 x MB339 CANADA PNP 1790 mm
1 x VIPER JET G2 Esq. 2 Red/White/Silver
1 x Bird (Aero-naut)
1 x TWIST planeador gomas
1 x Aero-Master Cabine (Aero-naut)
1 x 5 mm Prop Adapter M6
1 x Tirpiz Battleship 1:200
1 x 6 mm Prop Adapter M8
1 x 4 mm Prop Adapter CN-Spinner
1 x Aero-Master (Aero-naut)
1 x 5 mm Prop Adapter CN-Spinner
1 x 2.3 mm Adapter for 30 mm spinners
1 x VALACH VM 85 B2-FS
1 x Motor DA 60
1 x VTX 477 Carbon Rotorblade
1 x Cylinder head, left for VM 170/210
1 x Exhaust pipe BX 155 Left
1 x Motor DA 150
1 x Motor DA 85
1 x PCI-HV ignition conversion set with Zenoah rubber plug cap for Z
1 x EVOLUTION 10 GX gasoline motor
1 x Motor D.A. 200 Magnesium
1 x Kit wheel loader 966G II without electrics, without hydrauli
1 x ZG231cc SHL
1 x VBar NEO VLink 6.x Express, neon-yellow
1 x ZENOAH ZG 38 SC with Choke Carburettor
1 x ABS "T" angle 4.0x4.0x1000 mm
1 x Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x Body for landing gear Ø 3 mm
1 x 
1 x Copier 2x20 cm pcs
1 x DYNAMOMETER S-1580
1 x Boxed KIT OF 7 Rotary Burrs FINE
1 x Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x Nut M2 securing
1 x ABS rectangular profile 12x6.0x1000 mm
1 x Profile ABS Square 1 x 1000 mm
1 x Profile ABS Square 4 x 1000 mm
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x ABS "T" angle 6.0x6.0x1000 mm
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x Cierva C30 Elevator
1 x Cierva C30 simulated motor
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Tape GFK 25 mm
1 x Carbon fiber flat 1000x6.0x0.8 mm
1 x SE Ring 360 mm (2 pcs)
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x ABS "T" angle 2.0x2.0x1000 mm
1 x Head runner
1 x Carbon fiber rod 7.0 mmx1000 mm
1 x Screw M3x16
1 x LED wire (green - 2pcs)
1 x LED blink wire flashing (red - 2pcs)
1 x LED wire (blue - 2pcs)
1 x ED Position Lights wireless (Set of 3)
1 x LED blink wire flashing (orange - 2pcs)
1 x LED blink wire flashing (green - 2pcs)
1 x LED wire (orange - 2pcs)
1 x LED wire (rojo - 2pcs)
1 x LED lighting system High Power
1 x LED wire (white - 2pcs)
1 x LED blink wire flashing (blue - 2pcs)
1 x LED blink wire flashing (white - 2pcs)
1 x Y-Hose connector 2-2-2 mm
1 x Actuador lineal HLS12-100210-7.4v
1 x Landing gear axle Ø 5 mm (2 uds)
1 x Servo arm with 6 mm hole to FEMA 9800A
1 x T-Hose connector 3-3-3 mm
1 x Wheel cover holder Ø 4 mm (2 uds)
1 x Body for landing gear Ø 4 mm
1 x Servo arm with 4 mm hole to FEMA 9810A
1 x Quick hose connector 4-4 mm
1 x Tap FESTO 4-4 mm
1 x T-Hose connector 4-4-4mm
1 x Festo Adaptor Tygon Large/4mm
1 x Faucet FESTO
1 x Servo arm with 5 mm hole to FEMA 9810A
1 x Y-Hose connector 4mm
1 x Quick hose connector 3-3 mm
1 x Y-Hose connector 4-4-4mm
1 x Y-Hose connector 6-6-6 mm
1 x Check valve quick hose connector 4-4 mm
1 x Angled clevis with threaded rod M3
1 x Wheel collar 2 mm Ø (4 uds)
1 x Wheel cover holder Ø 5 mm (2 uds)
1 x 2,5x60 mm allen screwdriver
1 x Ball Link Plier
1 x SERVO HOLDER
1 x 1,5x50 mm allen screwdriver
1 x DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301)
1 x Extra Hard Titanium Herxagon Screwdrivers
1 x Ball Link Plier
1 x LOWER TOW HOOK
1 x Fresa corte diamante Ø 2.35mm (lentil)
1 x Optical RPM Sensor
1 x Fresa corte diamante Ø 1.4mm (bola)
1 x 
1 x Dremel PERMAGRIT thin lime
1 x Tow hook for tug
1 x Fresa corte diamante Ø 2.35mm (flame)
1 x Adapter lead MPX/EC3
1 x 100m servo "Premium" wire (white/red/blue)
1 x Crimping tool
1 x 7 Servo SET 9g DS MG + Full servo extension cable set for Avanti
2 x Lipo GENS 5300 mAh 4s 14.8v 60c Hard Case
2 x Lipo GENS Soaring 2200 mAh 2s 7.4v 30C
1 x TA1200 Charger Compatible with Smart and Standard LiPo Batteries
1 x Field folding model stand SebArt
1 x Avanti S 2.3m Jet YELLOW/BLACK & retract (SebArt)
1 x Avanti S 2.3m Jet WHITE/BLUE & retract (SebArt)
1 x Hitec 25 mm servo arm with M3 ball link
1 x Servo MKS HV747
1 x Servo MKS HBL599 SL
1 x XTorque CFK Servohebel 38 HITEC 25T
1 x Servo MKS HBL380
1 x Skyray (RBC Kits)
1 x Lipo GENS Soaring 3300 mAh 3S 11.1v 30C
1 x Tren electrico JP ER-005-V2 Mini AVANTI (Sebart)
1 x Lipo GENS 2700 mAh 3s 11.1v 30C "Soaring "
1 x Lipo GENS Soaring 1300 mAh 2s 7.4v 30C
1 x Lipo GENS 400 mAh 7.4v 35C
1 x PC-6 Pilatus Porter Big "Fredi" (PICHLER)
1 x SkyMaxx 1.550 mm (kit)
1 x Servo digital 17g MG - Std
1 x Battery LiPo TATTU 450 mAh 2S 7,4V 75C
1 x Lipo GENS 2200 mAh 2s 7.4v 20c Soaring
1 x Lipo GENS 1000 mAh 3s 11.1v 30C "Soaring"
1 x Lipo GENS Soaring 4000 mAh 3s 11.1v 30C
1 x PC-6 Pilatus Porter Big "Tiger" (PICHLER)
1 x Lipo GENS Soaring 2200 mAh 3S 11.1v 30C
1 x Lipo GENS Soaring 3300 mAh 2s 7.4v 30C
1 x Pilatus PC-21 50E, GLOW set conversion (SebArt)
1 x KatanaS 50E, Landing gear WHITE (SebART)
1 x Class 30, Red wheel pants (SebART)
1 x KatanaS 30E YELLOW/BLACK Tail Set (SebART)
1 x ALU servo arm 3 mm shaft
1 x 300x4 mm M4 shaft ship
1 x 75 mm
1 x 3,2 mm Prop Adapter M6
1 x Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x LOGO 600 SX (kit)
1 x Reduction gear 2.8:1 for ZG 38 inline version
1 x 7-Cylinder 35cc 4-Stroke Glow Radial Engine
1 x ABS rectangular profile 10x5.0x1000 mm
1 x Hitec 38 mm servo arm
1 x Servo MKS HV 777A+
1 x Brazo servo MKS Metal M3-L:30 (2 pcs)
1 x Brazo Servo XTorque 52 mm HITEC 25T-6
1 x Pilatus PC-21 50E RED/WHITE (SebArt)
1 x FUTABA 20 mm servo arm with ball link
1 x DC-3 Douglas (White/Blue) 1800 mm
1 x Hitec 20 mm servo arm
1 x Low line 74 mm
1 x Boat 140 mm
1 x Klumpblock (Plastik), Höhe 6 mm, 1 Rille, 20 Stück
1 x Capstan of plastic 88x30x36 mm
1 x Antiaircraft gun 10.5 cm (2 pcs)
1 x Klumpblock (Plastik), Höhe 8 mm, 1 Rille, 20 Stück
1 x "L" servo arm 65x49 mm (2 pcs)
1 x Cabestrante plastico 5x6 mm (10 pcs)
1 x Klumpblock (Plastik), Höhe 4 mm, 2 Rille, 20 Stück
1 x 10x7 tree blades propeller
1 x Spinner propeller pleg. 40 mm / 6,0 mm
1 x Spinner propeller pleg. 42 mm / 6,0 mm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x Demoulding wedge red (40 x 20 mm) 5 pcs
1 x Vacuum bag, 1200 mm x 50 m
55,327.25EUR
Manufacturers
Manufacturer Info
DA
DA Homepage
Other products
Languages
Español English
Currencies