1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
3 x Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x Plasti Dip Liquid Tape 429 ml orange
2 x 1000 ml sealer (DOPE)
1 x Spray YELLOW Inca Lexan 150ml
1 x Spannlack 1000 ml
2 x 
2 x Universal Colour Paste white 50 g
1 x Universal Colour Paste deep black 250 g
1 x Partall paste 650 g
1 x Plasti Dip Liquid Tape 429 ml black
2 x Hobbylite Filler, Balsa colour
1 x Universal Colour Paste deep black 50 g
1 x 500 ml sealer (DOPE)
2 x Universal Colour Paste signal white (RAL 9003) 1 Kg
2 x Plasti Dip Liquid Tape 429 ml black
1 x Spray Graphit 33
1 x Paint gun for sprays
1 x PARTALL® Hi-Temp Wax, 340 g
1 x Ventus 1:4 set of instruments
1 x 30 cm DEANS female connector
1 x XH female balance (4S) connector (2 pcs)
1 x Connectors banna oro 4 mm (M/F) (ultralight)
1 x Connectors DEANS 4 pins (1 pair)
1 x Connectors banna oro 0,8 mm (M/F)
1 x Connectors banna oro 6,0 mm (M/F)
1 x Connectors banana oro 6,0 mm Ultralight (M/F)
1 x Gold antispark 5,5 mm plug
1 x Connector CAN 15
1 x Optotronix Aurora Plug
1 x MPX Sub-D Adaptor
1 x Connectors banna oro 3,5 mm (M/F)
1 x Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x XH male balance (2S) connector (2 pcs)
1 x Connectors banna oro 3 mm (M/F)
1 x CF tube set (Ø 38 mm y Ø 14 mm)
1 x Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x ABS tube 18.0x16.0x1000 mm
1 x BALSA trip 6.0x6.0x1000 mm
1 x Trailing edge BALSA 35x8x1000 mm
1 x ABS tube 3.0x1.0x1000 mm
1 x Liston HAYA 3 x 10 x 1000 mm
1 x ABS tube 9.0x7.0x1000 mm
1 x BALSA trip 3.0x3.0x1000 mm
1 x ABS tube 8.0x6.0x1000 mm
1 x BALSA leading edge 8x10x1000 mm
1 x ABS tube 14.0x10.0x1000 mm
1 x ABS tube 9.0x8.0x1000 mm
1 x Beech dowels 10 mm x 1000 mm
1 x Linden wood slat 3.0x3.0x1000 mm
1 x BALSA trip 2.0x2.0x1000 mm
1 x Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x ABS tube 6.0x5.0x1000 mm
1 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x Pine wood slat 3.0x10.0x1000 mm
1 x USB Mini Camera endoscope
2 x 800TVL CMOS camera for FPV
1 x Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x Brass control horn M3 short for wire (2 pcs)
1 x Horn with ball 40x30
1 x Horn 16,5x20 mm (2 pcs)
1 x Brass control horn M4 short for wire (4 pcs)
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Cable with accesories
1 x Horn 5/10 with M2 Bearing
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x RH long aluminium horn (2pcs)
1 x 6 mm blue aluminium threaded horn with patella
2 x Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x LH long black aluminium horn L31xH30 (2pcs)
1 x LH long aluminium horn L31xH30 (2pcs)
1 x Horn 20x28,5 mm (2 pcs)
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
2 x Horn 5/20 with M2 Bearing
1 x Small aluminium horn red (2pcs)
1 x Threaded coupler ALU M2 Ø 3 (2 uds)
1 x Small aluminium horn gold (2pcs)
1 x Horn with ball 55x40
1 x Brass control horn M4 short for wire (10pcs)
1 x Small aluminium horn blue (2pcs)
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x ABS Strip 1.5x4.0x1000 mm
1 x ABS Strip 1.0x5.0x1000 mm
1 x Parachute BACKUP X100
1 x Propeller APC 10x6 Electric Pusher
1 x Lock washer 2.2 mm (20 pcs)
1 x Oracover Black 2 m
2 x Spray adhesive AEROFIX 2
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x Presto SF Light Filler styrene-free (420 g)
1 x Gold antispark 4 mm plug
1 x Compact on-board starting system (9724)
1 x Variable Flow Smoke Pump System
1 x Vess propeller 11x7 S
1 x Sanyo RX Battery Eneloop 6,0 V JR
1 x Sanyo Eneloop AA 1,2 V battery 2000 mAh
2 x Propeller APC 10x4 Glow/Gas
2 x Propeller APC 12x8 Glow/Gas
1 x FIALA Propeller 25x10
1 x Solvent Plasti Dip 1000 ml
1 x Starter EM Gear Power 250
1 x Vess propeller 12x7 S
1 x Sanyo TX Battery Eneloop 7,2 V MPX
2 x Ignition bed V2 Red color
1 x Nitroverdu 500 ml
1 x PowerBox Smokepump JETs 2x outside
2 x Propeller APC 10x7 Glow/Gas
1 x FIALA Propeller 27x10
1 x Hose clips 6 mm
1 x FIALA Propeller 16x6
1 x EME 55 cc carburetor WALBRO
3 x Propeller APC 15x6 Glow/Gas
1 x Selfstarr EME35
1 x Sanyo TX Battery Eneloop 9,6 V 2500 mAh
2 x Gates hinge
2 x Pin type hinge Al 3,0x50 mm (2 pcs)
2 x 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
2 x Fast'n EZ-CA-Hinge (12 uds)
1 x Motor ACTRO 35-4-790
1 x 6 mm M3 variable horn
1 x Horn 6/20 with M3 Bearing
1 x SC NAVY V15R
1 x Long adjustable control horn with bearing
1 x Horn DUBRO 1/2A
1 x Long extra-strong control horn with bearing 2,8x34
1 x Jodel D.9 BeBe 2.400 mm Kit
1 x Propeller MEJLIK 20x13 N-3 Blades
1 x Propeller MEJLIK 27x12 TH
1 x Propeller MEJLIK 32x12 EVO
2 x Propeller MEJLIK 30x12
2 x Propeller MEJLIK 24x10 TH
1 x Hovercraft sailcloth
1 x Propeller MEJLIK 28x10
1 x VBar Control Touch, midnight black
1 x TWIST planeador gomas
1 x RX external cable for estandar receivers
1 x PIT (Aero-Naut)
1 x Aluminium ignition bad (blue)
1 x Propeller APC 14x6 Glow/Gas
1 x Electric Fuel Pump 12V
1 x Secraft Fuel system v2, red color
1 x Smoke pump RCEXL
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x Pin hinge 39x20 mm (10 uds)
1 x PBY 6/6A Catalina, Observer´s dome (L + R)
1 x Recess mount-rem. glow plug set
1 x FIALA Propeller 18x10
2 x GLOW 2C + accesories
1 x FIALA Propeller 23x8 Electric
1 x FIALA Propeller 26x10
1 x Aluminium ignition bad (red)
1 x Encendido CDI RCAME 1/4*32 Single 120º
1 x Propeller APC 11x5 Glow/Gas
2 x Propeller APC 16x8 Glow/Gas
1 x Propeller APC 12x6 Glow/Gas
1 x Propeller APC 11x7 Glow/Gas
1 x Compact on-board starting system (9512)
1 x Selfstarr DLE55, EME55/60, DLA56, SE 55
1 x Opto Gas Engine Kill Switch
1 x Electric Fuel pump
1 x FIALA Propeller 18x8
1 x Long pinned hinge (12 uds)
1 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Micro flex hinge (12 uds)
1 x Gates hinge black 30x16 mm (2 pcs)
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x Pin hinge 34x16 mm (10 uds)
1 x Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x FIALA Propeller 23x8
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x 67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x Large flex hinge (12 uds)
1 x Indoor hinge with servo arm integraded
1 x 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x 18 mm reinforced hinge
1 x Gates hinge aluminium (1 pcs)
1 x Flap hinge 33x9 mm (6 pcs)
1 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x FIALA Propeller 20x8
1 x Medium pin type hinge (12 uds)
1 x 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x Pin type hinge Al 4,5x70 mm (2 pcs)
1 x Gates hinge 30x16 mm (2 pcs)
1 x Pin hinge 26x11 mm (10 uds)
1 x 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Long pinned hinge (6 uds)
1 x Flap hinge (6 pcs)
1 x Combo KAVAN C3536-1250 + KAVANA R50SB +
1 x Race Outboard MERCURY type A
1 x Motor ACTRO 28-3-1300
1 x Motor ACTRO 35-4-1100
1 x Aqua RACE 70 (without motor)
1 x Servo NARO Max Std
1 x 2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x Propeller MEJZLIK 20x10 Electric light (36 g)
1 x Propeller MEJLIK 26x12 N-3 Blades
1 x Propeller MEJLIK 16x11 3 Blades
1 x Fishing boat Jule Fischkutter
8,517.23EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies