Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

VSpeak Modulo Glasses JETI
151.25EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	U Profile ABS 8,0x4,0x1000 mm
1 x	Carbon fiber rod 0.8 mmx1000 mm
1 x	Carbon fiber rod 1.0 mm x 1000 mm
1 x	Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x	M3 INDUSTRIAL ball link (2 uds)
1 x	SE Ring 350 mm (2 pcs)
1 x	ABS angle 3,0x3,0x1000 mm
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Profile ABS Square 4 x 1000 mm
1 x	Socket head long ball link M3 (6 uds)
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	Support conector MPX (6 pcs)
1 x
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	6 mm hexagonal ball link M3 (10 pcs)
1 x	Support pumb/filter Xicoy X45
1 x	Support Flush MPX Conector (6 pcs)
1 x	Glases Nimbus
1 x	Propeller CFK 13x9
1 x	Propeller CFK 16x16 Wide
1 x	Propeller RF CFK 14.5x14
1 x	Propeller RF CFK 13x6.5
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	ABS 500 x 400 x 1,5 mm (white)
1 x	Crimping tool
1 x	30 cm BEC cable (male)
1 x	Buy Perforated film 100 cm / 50 m
1 x	Hot Glue Stick GREEN
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Tow hook for tug
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	ABS 500 x 400 x 2,0 mm (white)
1 x	Round Rod 2,5x1000 mm
1 x	CC 03
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	Hot Glue Stick BLACK
1 x	5 LiPo XH>EH adapter
1 x	Fiberglass heat shield Ø 4 mm 1000 mm
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x	10m servo "Premium" wire (white/red/blue)
1 x	Strip ABS 2.0x5.0x1000 mm
1 x	Pine wood slat 3.0x7.0x1000 mm
1 x	165 mm PVC transparent battery termo-retract 165 mm (1 m)
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x	CC 05
1 x	White smoke bombs AX-3 (10 pcs)
1 x	Piloto JET 1:3,5
1 x	1/4 Pilot "Mike"
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	Yellow smoke bombs AX-60 (5 pcs)
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Blue metalic ball link M2/2 azul (2 pcs)
1 x	Joint with bearing M2,5 22x5,5
1 x	SE Ring 300 mm (2 pcs)
1 x	Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	U Profile ABS 1,0x2,0x1000 mm
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	SE Ring 200 mm (2 pcs)
1 x	Socket head ball link M3 (2 uds)
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	Carbon fiber rod 6.0 mmx1000 mm
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	Carbon fiber rod 10 mm x 1000 mm
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Carbon fiber flat 1000x3.0x0.5 mm
1 x	Propeller RF CFK 10x17
1 x	Propeller CFK 18x16
1 x	Glases Moritz
1 x	Glases Flitemaster
1 x	Propeller CFK 17x13
1 x	BALSA triangular 15x15x1000 mm
1 x	3,0x60 mm allen screwdriver
1 x	19 mm 2:1 black termoretract tube
1 x	Tube Pitot to PIXHAWK
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	Cable set PREMIUM , fuselage/wing one4one
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Extractor piñones 2.3/3.2 mm
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x	Cabel charger transmitter GRAUPNER
1 x	Protective Cover for wires Ø 6 mm 1000 mm
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x	Vacuum pump P1-N
1 x	Carbon fibre sandwich sheet 350x150x3 mm
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Screwdriver for Hexagon 1,5mm
1 x	37 mm PVC transparent battery termo-retract (1 m)
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	Xplorer2 anemometro
1 x	1 m servo "Premium" wire (white/red/blue)
1 x	Oracover Azul Cielo 2 m
1 x	6,4x1000 mm 2:1 green termoretract tube
1 x	3 LiPo XH>EH adapter
1 x	Aluminium tube with fibreglass case ø35x1.5mm, 500mm
1 x	1/7 Pilot "Japanese"
1 x	1/12 Pilot "Langley"
1 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x	Smoke set "S"
1 x	Straightened rod Ø 2.0 mm x 1000 mm
1 x	White smoke canister 100 g
1 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	1/10 Pilot "Jimmy"
1 x	Piloto Jet "Green" 1/6 Scale
1 x	6 mm ball link M3 (10 pcs)
1 x	Joint with bearing M3 22x5,5
1 x	U Profile ABS 3,0x6,0x1000 mm
1 x	Ball link M2 (10 pcs)
1 x	Soporte filtro FESTO (4 pcs)
1 x	ABS angle 6,0x6,0x1000 mm
1 x	Support ECU Xicoy X-45
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	Short ball link M1.6 (6 uds)
1 x	L-Connector 4.0 mm x 1000 mm
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	Profile ABS half cane 3x1000 mm
1 x	Support pump Xicoy X45
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	Long ball link M1.6 (6 uds)
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Carbon fiber rod 8.0 mmx1000 mm
1 x	M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x	SE Ring 240 mm (2 pcs)
1 x	Support Pitot JETI

3,218.59EUR