Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Beaver DHC-2 DeHavilland 3000mm White/Black CYMODEL
975.02EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	PowerFuel RX V2 Fuel Pump
1 x	PowerBox Smokepump JETs 2x outside
2 x	JM electric Pump
1 x	PowerBox Smokepump
2 x	Electric Fuel Pump 12v
1 x	Smoke pump RCEXL
1 x	Variable Flow Smoke Pump System
1 x	KAVAN Hand crank fuel pump
2 x	Secraft Fuel system v2, red color
1 x	Conector FESTO G1/8 Quick 4mm 90º
1 x	FESTO connector M7 barb fitting XL Tygon
1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Horn 6/20 with M3 Bearing
1 x	Extension PVC 150 cm (Graupner)
1 x	Ring 320 mm length (5 pcs)
1 x
1 x	Copier 5x20 cm pcs
1 x	Fresa corte diamante Ø 2.35mm (lentil)
1 x	Digital precision scale up to 2000 g
1 x	Aramid fibre shears Proton®, 21 cm / 8" length
1 x	Dremel PERMAGRIT 18 mm round lime
1 x	25 mm Sandpaper file
1 x	Extinguisher CO2 - 2 Kg
1 x	M3 Maxi ball link (2 uds)
2 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	Red smoke canister 100 g
1 x	Socket head ball link M3 (2 uds)
1 x	White smoke canister 100 g
1 x	Carbon fiber rod 20 mmx1000 mm
1 x	Adapter lead MPX/EC3
1 x	"S" set for boats
1 x	Tube Pitot to PIXHAWK
1 x	Smoke set "Glider"
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Micro flex hinge (12 uds)
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Z type of cable coupler Ø 1 (2 uds)
1 x	Miniature brass strap hinge, 1 m
2 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x	Large flex hinge (12 uds)
1 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x	Ball link Aluminio M3 (2 pcs)
1 x	Couple M4 for wire (10 pcs)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
2 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Kavan Car 25% nitro 1l
1 x	120x60 mm SLH KOVO wheel
1 x	Bags BULL Mo1 2.6m "Luxe"
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	Tank BULL MØ1 3L+14L Smoke (CMJets)
1 x	Marker ties (20 pcs)
1 x	USB interface ALTIS
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Blue aluminium servo arm V1-Hitec 1,5" inch M3
1 x	Interruptor RX/Batterie
1 x	Female connector JST SH 1.0mm with 10 cm wire
1 x	CC 05
1 x	Blue aluminium servo arm V1-Hitec 1,0" inch M2
1 x	Receiver bed (Blue)
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	RX external cable for estandar receivers
1 x	Baseplate servo
1 x	RX cabel
1 x	Y Cable
1 x	Set transmisions BULL Mo1 (dura/aluminium)
1 x	Pipa 3D BULL MØ1 2.600mm
1 x	Tank BULL MØ1 4L (CMJets)
1 x	Tank BULL MØ1 (3.2 L) + 1x (0.9 L) + 1x (0.9L Smoke) PRO
1 x	GPS Expander Module
1 x	Electric Landing Gear GS-200 BULL Mo1 2.6 (Elektron Retracts)
1 x	800TVL CMOS camera for FPV
1 x	GPS Logger Dymond
1 x	Aluminium wide washer M3 gold (4 pcs)
1 x	Servo Mount S (red)
1 x	M3/5 Diam metal short ball link V3 (2 pcs)
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Red aluminium servo arm V1-Futaba 23 mm M2
1 x	Servo Mount M (blue)
1 x	Extension 2/3 lipos JST - JST/C
1 x	Optical RPM Sensor
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	Female connector for 6 pines AWG
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Extension 5 lipos JST - JST/C
1 x	Rudder 2_Tray 3~3.5 inch
1 x	Male Prolonger TP 4/5S
1 x	Aluminium wide washer M4 Blue (4 pcs)
1 x	Aluminium cap bolt washer M4 green (8 pcs)
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Red aluminium servo arm V1-Futaba 1,5" inch M3
1 x	Red aluminium servo arm V1-Futaba 1,25" inch M3
1 x	Aluminium cap bolt washer M3 red (8 pcs)
1 x	Male connector JST SH 1.0mm with 10 cm wire
1 x	PSC 5
1 x	Carbon fiber rod 16 mm x 1000 mm
1 x	Thermoforming sheet 0.3mm (0.039in) DIN A4
1 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x	Release film 100 cm x 50 m
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Sandwich carbon + poplar 2mm + carbon 290x160 mm
1 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Carbon fiber rod 2.5 mmx1000 mm
1 x	25 mm reinforced hinge
1 x	Medidor ángulos y/o incidencias
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	Angle of incidence meter
1 x	Field folding model stand
1 x	Surface Indicator Gauge Small
1 x	Propeller balancer
1 x	Propeller balancer
1 x	Oracover Azul 2 m
1 x	ORACOVER Ferrari red (2 m)
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Stickers-digit for marking
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	15 mm reinforced hinge
1 x	Pin hinge 26x11 mm (10 uds)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Pin hinge 34x16 mm (10 uds)
1 x	Sandwich carbon + poplar 2mm + carbon 480x290 mm
1 x	Strip 2,5x1,25x330 mm
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	L-shaped servo mount
1 x	Angle measurer
1 x	Field folding model stand SebArt
1 x	WingFix ULTRA Black Edition
1 x	105 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	6,4x1000 mm 2:1 black termoretract tube
1 x	6,4x1000 mm 2:1 green termoretract tube
1 x	Monokote BLUE metalizado (1.8x0.65m)
1 x	MYLAR film A350 (1000x500 mm)
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	ABS I Strip 20x10x1000 mm
1 x	Round Rod 1,0x1000 mm
1 x	Radial mount for electric 2.5-5.6
1 x	Wheel FEMA 100 mm / 6 mm
1 x	SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm
1 x	Wheel FEMA 82 mm / 5 mm
1 x	A60-6XS V4 28-Pole
1 x	Wheel FEMA 127 mm / 6 mm
1 x	Compact on-board starting system (9512)
1 x	Brake for 140 mm wheels
1 x	Compact on-board starting system (9724)
1 x	Wheel FEMA 140 mm / 6 mm
1 x	ESC ALPHA 60A HV
1 x	CC 11 Conector
1 x	Quick hose connector 3-3 mm
1 x	Motor holder AXI
1 x	OS 37 SZ-H, Piston
1 x	OS 37 SZ-H, Bulon piston
1 x	Oracover Black 10 m

11,036.58EUR