Top » Catalog » Hardware » Servos » Hitec » ROIHS635HB

25.75EUR

Servo HITEC HS-635HB Carbonite
[ROIHS635HB]

The HS-635HB utilizes the revolutionary “Karbonite ™” gear train. Karbonite ™ is four times stronger than our standard nylon gears and even after hundreds of thousands of cycles it does not show any signs of wear. With a powerful motor, and dual ball-bearing mounted output shaft, the HS-635BB offers plenty of torque and speed. If your application requires increased speed and torque, the HS-635BB is the perfect upgrade from a standard size servo.

Specifications
- Motor Type: 3 Pole
- Bearing Type: Dual Ball Bearing
- Speed: 0,18 / 0,15 sec @ 60 deg.
- Torque: 69,43 / 83,32 oz.in (4,8v/6v) 5,0 / 6,0 kg/cm
- Size: 1,59"x0,77"x1,52" 40,60x19,80x38,80 mm
- Weight: 1.76oz 50.00g

temporarily out of stock

Reviews

Customers who bought this product also purchased

Cabel "Y" 30 cm (Futaba) temporarily out of stock	Teacher-student connector T12FG/FX-30 temporarily out of stock	Extension silicon 30 cm male (Futaba) temporarily out of stock
Extension silicon 30 cm female (Futaba) temporarily out of stock	Servo HITEC HS-225 MG temporarily out of stock	Servo HITEC HS-125 MG temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
    Aero-naut
    BLUE BIRD servo
    DUBRO
    Dymond
    Electron Retracts
    FEMA
    FUTABA
    Gabriel-Stahlformenbau
    Graupner
    Hacker
    Hitec
    JETI
    KAVAN
    KST Servo
    MKS Servos
    MULTIPLEX
    PICHLER
    ROBBE
    ROI-Import
    Savox
    SebART
    Secraft
    Servos
    Thunder Power
    Tonegawa-Seiko
    Toni Clark
    Top Model
    VOLZ
    Acc.Electronics
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

DUPLEX case for Jeti DS handheld transmitter
54.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Straightened threaded rod M3 - 1m
1 x	Colador RABBIT
1 x	Servo NARO Max Std
1 x	Cap Hispano Aviación
1 x	Shirt Hispano Aviación
1 x	LOWER TOW HOOK
1 x	Opale Rucksack
1 x	Motor OS 3820-1200 electric
1 x	Baering 3x8x4
1 x	Screws flush mount M2
1 x	Battery plate
1 x	Head upper part
1 x	Head core bushing
1 x	Steering lever
1 x	Servo Fork
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	Extension silicon 30 cm female (Futaba)
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	Prolongador S-Bus JR/JR 20cm
1 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	BALSA triangular 15x15x1000 mm
1 x	Beech dowels 3.0 x 1000 mm
1 x	BALSA triangular 10x10x1000 mm
1 x	Premium servo extension 100cm
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	200 mm extensión servo HITEC/JR
1 x	White smoke bombs AX-9 (10 pcs)
1 x	DPSI Ampere battery backer
1 x	5 LiPo XH>EH adapter
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	DPSI magnetic switch actuator (housing)
1 x	1/6 Pilot "Tony"
1 x	1/12 Pilot "Langley"
1 x	Connector Sub-D 2+5 Male
1 x	1/10 Pilot "Jimmy"
1 x	Adapter lead MPX/XT60
1 x	Red smoke canister 140 g
1 x	Yellow smoke canister 65 g
1 x	Connector Sub-D 2+5 Female
1 x	4 LiPo XH>EH adapter
1 x	"S" set for planes
1 x	1/4 Pilot "Mike"
1 x	160 mm carbon undercarriage (2pcs)
1 x	White smoke bombs AX-18 (5 pcs)
1 x	22m Fitting barb
1 x	Red smoke bombs AX-60 (5 pcs)
1 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x
1 x	Smoke set "M"
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	102 mm aluminium spinner
1 x	CC 05
1 x	Yellow smoke canister 140 g
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	100x50 mm SLH KOVO wheel
1 x	10 mm gas motor standoff
1 x	AX-60 starters (5 pcs)
1 x	AX-60 starters (5 pcs)
1 x	20x200 mm battery rings
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Parachute expulsion foam
1 x	Piston ring for DA-150
1 x	Carburetor for DA150L/170
1 x	Piston ring for DA-50R and DA-100
1 x	Crankshaft DA-120
1 x	Carburador DA-35, DA-50R-DA-100L , VM-60/70
1 x	Hifht speed needle DA-50R/100I
1 x	Ignition for DA-35 (without pickup sensor)
2 x	Carburator spacer block DA-50R
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	Sandwich carbon + poplar 4mm + carbon 290x160 mm
1 x	Sandwich carbon + poplar 2mm + carbon 290x160 mm
1 x	Piston pin for DA-60 DA-120
1 x	HV6150 Digital Servo
1 x	Servo MKS HV747
1 x	Servo TOPMODEL DS1413 T
1 x	57 mm micro-mini servo cover
1 x	HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x	Professional Servo tester
1 x	Servo inverter
1 x	Servo Metal Horn 15.5 mm MKS
1 x	Servo MKS HV 777A+
1 x	Servo MKS HV1220
1 x	Brazo servo MKS Metal M3-L:30 (2 pcs)
1 x	Brazo servo MKS X8 Metal L:1.25/1.5 inc
1 x	Servo MKS 6100 DS
1 x	Servo MKS HV69
1 x	Servo MKS 6100 DS
1 x	Servo MKS HBL599 SL
1 x	Servo inverter
1 x	Servo TOPMODEL S7520 MG
1 x	65 mm mini servo cover
1 x	11 mm wing servo holder
1 x	AC-10 pre-rotacion with motor
1 x	13 mm wing servo holder
1 x	90x60 mm standart servo cover
1 x	18 mm wing servo holder
1 x	50x45 mm micro-mini servo cover
1 x	Servo Tester
1 x	90x75 mm standart servo cover
1 x	LA500 freewheel bearing
1 x	Servo TOPMODEL DS9010 T
1 x	HITEC DPC-11 programmer
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	Extension silicon 100 cm (Futaba)
1 x	Extension 30 cm (Futaba)
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Birch plywood plate 600x300x2.5 mm
1 x	LA500 tail empennage
1 x	Nut M2
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	Cockpit aluminium closing 5.4g
1 x	Silicone red 0,25 mm² wire (25 m)
1 x	Servo slow down unit (0,7-14,7 sec )
1 x	Gasket, Aluminium-Plate >reed valve carrier DA-85, DA-100L, DA-1
1 x	F3A carbon 82 mm spinner for 12 mm axis
1 x	38 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x	Spinner INO 51 mm Chrome (Imitacion metal)
1 x	57 mm INO spinner (carbon imitation)
1 x	Spinner Alumin. fixed propeller 45 mm / 5,0 mm
1 x	Spinner Alumin. fixed propeller 50 mm / 6,0 mm
1 x	Spinner fixed propeller 60 mm / 5,0 mm
1 x	ANGEL 48" pp orange/black/white
1 x	Cylinder for DA-85/170 (1 piece)
1 x	Carb Carrier, red DA-85, DA-100L and DA-120
1 x	Cylinder Gasket set for DA-60 / DA-120
1 x	Bearing upper rod DA-50R, DA-60, DA-100, DA-100L, DA-120
1 x	Cylindergasket DA 170
1 x	DA-50R motor alumine support
1 x	Cable silicona macho batt. receptor 30 cm (Futaba)
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	Cable S.BUS 3 salidas 300 mm
1 x	Beech dowels 4.0 x 1000 mm
1 x	quality beech plywood BIRCH 600x300x2.0 mm
1 x	Birch plywood plate 600x300x1.5 mm
1 x	Futaba male 40 cm extension
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	Futaba Female 40 cm extension
1 x	Pine wood slat 3.0x7.0x1000 mm
1 x	Pine wood slat 10x10x1000 mm

4,356.30EUR