Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

21x14 BIELA propeller (3-blades) Pusher
89.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	ABS Strip 1.5x2.0x1000 mm
1 x	Strip ABS 2.0x8.0x1000 mm
3 x	Round Rod 5,0x1000 mm
3 x	Strip ABS 2.0x3.0x1000 mm
2 x	ABS I Strip 20x10x1000 mm
2 x	ABS Strip 1.5x4.0x1000 mm
2 x	Round Rod 4,0x1000 mm
2 x	ABS Strip 1.0x5.0x1000 mm
2 x	400 Newtons FEMA absorber
2 x	Strip 2,5x1,25x330 mm
1 x	Round Rod 1,5x1000 mm
1 x	Round Rod 3,0x1000 mm
2 x	ABS Strip 1.0x2.0x1000 mm
3 x	Round Rod 1,0x1000 mm
1 x	200 Newtons FEMA absorber
1 x	150 Newtons FEMA absorber
1 x	ABS Strip 1.5x6.0x1000 mm
3 x	Round Rod 2,0x1000 mm
1 x	Extinguisher CO2 - 2 Kg
1 x	Mudguard for 140/165 mm wheels
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	Mahogany wood slat 1.5x1.5x1000 mm
2 x	Beech dowels 10 mm x 1000 mm
1 x	BALSA triangular 15x15x1000 mm
2 x	BALSA trip 10x10x1000 mm
1 x	OBECHI sheet 2.0x3.0x1000 mm
2 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Beech dowels 2.0 x 1000 mm
2 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	BALSA triangular 6x6x1000 mm
1 x	BALSA leading edge 8x10x1000 mm
1 x	Pine wood slat 5.0x5.0x1000 mm
2 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	Beech dowels 3.0 x 1000 mm
2 x	Beech dowels 4.0 x 1000 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	BALSA triangular 10x10x1000 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	Pine wood slat 3.0x7.0x1000 mm
3 x	Cap closure 33/23.5mm (2 uds)
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	Locking cable tie 3.2x142 (uds)
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
2 x	Steering arm 12 mm Ø 4 mm (2 uds)
3 x	Cockpit plastic closing
2 x	Stainless steel cable Ø 0.62 mm (10 m)
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Extension silicon 75 cm (Graupner)
1 x	Cable silicona female batt. receptor 30 cm (Futaba)
1 x	M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x	Extension silicon 10 cm (Graupner)
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	WingFix ULTRA Black Edition
1 x	Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs)
1 x	Smoke set "S"
1 x	Airtop balloon pneumatic wheels ø160 mm with bearing. 1 pair
1 x	500 ml sealer (DOPE)
1 x	Spray adhesive AEROFIX 2
1 x	Motor DLE 170 M- Paramotors
1 x	LH long black aluminium horn L31xH30 (2pcs)
2 x	Round Rod 1,25x1000 mm
1 x	1/12 Pilot "Fighter"
1 x	20 mm carbon horn
1 x	18m Fitting barb
1 x	110x55 mm SLH KOVO wheel
1 x	1/6 Pilot "Tony"
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
2 x	Strip ABS 2.0x5.0x1000 mm
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	ABS Strip 1.5x3.0x1000 mm
1 x	Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs)
1 x	Allen wheel collar M3x3
1 x	Fully Threaded Steel Rod M3
1 x	Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs)
1 x	Strip 2,0x2,0x330 mm
1 x	Round Rod 6,0x1000 mm
1 x	PVC transparent red battery termo-retract 68 mm (10 m)
2 x	3,2x1000 mm 2:1 red termoretract tube
1 x	PVC blue transparent battery termo-retract 95 mm (1 m)
1 x	12.7 mm 2:1 black termoretract tube
1 x	2,4x1000 mm 2:1 red termoretract tube
1 x	6,4x1000 mm 2:1 black termoretract tube
1 x	PVC blue transparent battery termo-retract 68 mm (10 m)
1 x	PVC red battery termo-retract 68 mm (10 m)
1 x	12,7x1000 mm 2:1 green termoretract tube
1 x	SIG Coverall 1.2x0.9 m
1 x	PVC transparent battery termo-retract 51 mm (1 m)
1 x	Banna gold connector 2,5 mm (100 M/F pairs)
1 x	A/C quality beech plywood 1520x750x3.0 mm
1 x	A/C quality beech plywood 600x300x8.0 mm
1 x	Lite Plywood panel 600x300x3.0 mm
1 x	Birch plywood plate 600x300x1.5 mm
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	quality beech plywood BIRCH 600x300x2.0 mm
1 x	Birch plywood plate 600x300x2.0 mm
1 x	Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs)
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Split pin 1.6x16 mm (10 uds)
1 x	38x4,5 mm wires output (2 pcs)
1 x	Connector CAN 15
1 x	Motor A30-12 XL Glider
1 x	Axle for motor A50-L
1 x	DUBRO - BOLTON PRESSURE FITTING 6-32 (1 PC)
1 x	Motor HP 220/30/A3 P4 5:1
1 x	Motor Advance 50-6
2 x	Motor ORBIT 20-12 with coolingfan
1 x	Motor A20-22 L EVO
1 x	Axi for motor A40-L Motor 8-Pole-Electric Turbine
1 x	Motor B20-10 L + 4:1 gearbox
1 x	Motor A30-14 M V2 6 Poles
1 x	Motor A20-20 L EVO
1 x	100 Newtons FEMA absorber
1 x	Strip 1,5x1,5x330 mm
1 x	IKARUS plane
1 x	Propeller RABOESCH M3 50 mm (3 Blades pr) (Left hydropropeller)
1 x	290 mm M4/M4 6.0x4.0 mm shaft ship
1 x	Spare Shaft Ø6mm L:450mm M5
1 x	7 Servo SET 9g DS MG + Full servo extension cable set for Avanti
1 x	Avanti XS Jet , Tricolore Canopy
1 x	7 Servo SET 9g DS MG + Full servo extension cable set for Avanti
1 x	Towing hook <3m
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	Motor Mount for TITAN ZG38/38S/38SC, length 36 mm
1 x	Piston ring for ZG 20 and G240RC
1 x	3,9 mm ZG20-ZG38 servo arm
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Piston ring for DA-60 and DA-120
3 x	Wing bolts M3 Steel screw blue (2 pcs)
2 x	Control for forward wheel (MINI)
2 x	Cockpit aluminium closing
3 x	Window mounting channel Type H 2.5x0.5 (2 m)
1 x	Wing bolts M6 Steel screw Red (2 pcs)
1 x	Q80-13S 20-Pole F3A
1 x	22m Fitting barb
2 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	Carburador DA-35, DA-50R-DA-100L , VM-60/70
1 x	Miniature brass strap hinge, 1 m
1 x	DA 85 / DA 100 / DA 100 L carburetor
1 x	Motor Mount for TITAN ZG45 and ZG62, length 36 mm
1 x	Wing bolts M6 Steel screw Blue (2 pcs)
1 x	Cable grommet Ø 3.2 mm (4 uds)
1 x	Cierre cabina aluminio Ø5, I=16 mm
2 x	Triple rod con. 2mm Pushrod (2 pcs)
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Cable grommet Ø 4 mm (4 uds)
1 x	Cable grommet Ø 5 mm (4 uds)
1 x	Press fitting for 0,5 diam. steel cable (10 pcs)
1 x	STEERING FRONT WHEEL SYSTEM BIDULE 111
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Wheel collar 6 mm Ø (4 uds)
1 x	140 mm rods set for direction control
1 x	Tip wing protector 28x10x12 (2 pcs)
1 x	140 mm rods + T patellas set for direction control
1 x	100 mm rods set for direction control
1 x	Cockpit metalic closing
1 x	Cockpit aluminium closing 4.7g
1 x	90 mm rods + T patellas set for direction control
1 x	Motor B50-9L Competition + 6,7:1
1 x	170x54 mm SLH KOVO wheel with bearing and metal hub
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Clip fixing for wing (2 pcs)
1 x	Steering arm 12 mm Ø 4 mm
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Wheel collar 5 mm Ø (4 uds)
1 x	Cockpit aluminium closing 5.4g
1 x	Cabin latch Fox MDM1 4m (pair)

7,700.38EUR