Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Beaver DHC-2 DeHavilland 3000mm White/Black CYMODEL
975.02EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Towing hook <3m
1 x	Strip ABS 2.0x8.0x1000 mm
1 x	Extractor piñones 2.3/3.2 mm
1 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x	Servo NARO Max Std
1 x	45 mm rods set for direction control
2 x	Long pinned hinge (12 uds)
2 x	Pin hinge 26x11 mm (10 uds)
1 x	Aluminun wheel collar 4 mm Ø (4 uds)
1 x	Clip mini fixing for wing (2 pcs)
1 x	Allen wheel collar M4x4
1 x	Flap hinge (6 pcs)
2 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
2 x	Medium pin type hinge (12 uds)
1 x	Cable grommet Ø 3.2 mm (4 uds)
2 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
2 x	Gates hinge aluminium (1 pcs)
1 x	Cable grommet Ø 4 mm (4 uds)
2 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	250 mm / 16 mm Airbrakes
1 x	Cabin latch Fox MDM1 4m (pair)
2 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Canopy Latch
1 x	38x4,5 mm wires output (2 pcs)
1 x	Cable tie mounts 4.3 (4 uds)
1 x	100 mm rods set for direction control
2 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Glases Flitemaster
1 x	Beech dowels 3.0 x 1000 mm
1 x	BALSA trip 10x10x1000 mm
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	Blue smoke canister 140 g
1 x	DPSI Micro SingleBat 5.9V/7.2V magnetic switch
1 x	Soporte filtro FESTO (4 pcs)
1 x	OPTOTRONIX Aurora LCU
1 x	1/12 Pilot "Fighter"
1 x	Soporte grifo FESTO (2 pcs)
1 x	Support Filtro FESTO
1 x	DPSI magnetic switch actuator (PCB)
1 x	bavarianDEMON USB cable
1 x	Angle support XT60 conector
1 x	1/6 Pilot "John"
1 x	DUPLEX 2.4EX Central Box 210
1 x	DUPLEX 2.4EX Central Box 220
2 x	Wing bolts M3 Steel screw Red (2 pcs)
1 x	Pushrod greyline 3/2 with coupler M2
1 x	Snap long M2 (10 uds)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
2 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Locking cable tie 3.2x142 (uds)
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Stainless steel cable Ø 0.5 mm (2 m)
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	Pushrod octagone 3/2
2 x	Tip wing protector 30x10 (2 pcs)
2 x	Micro flex hinge (12 uds)
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	Round Rod 2,0x1000 mm
1 x	Strip 2,5x1,25x330 mm
1 x	Round Rod 6,0x1000 mm
1 x	Strip 1,5x1,5x330 mm
1 x	Round Rod 1,5x1000 mm
1 x	ABS I Strip 10x5x1000 mm
1 x	Pilot Lotsenboot
1 x	Snap short M2 (10 uds)
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
2 x	Miniature brass strap hinge, 1 m
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Landing gear frontal support 29x26x13,5
1 x	One touch canopy lock
1 x	Wheel collar 5 mm Ø (4 uds)
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	Split M1,2x10 (10 pcs)
1 x	Wheel collar 3.5 mm Ø (4 uds)
1 x	Pushrod octagone 4/3 with coupler M3
1 x	Split pin 1x8 mm (10 uds)
1 x	Pushrod greyline 3/2 with coupler M3 L: 1000 mm
1 x	Snap for floding prop for 2 mm axi
1 x	Wheel collar 4 mm Ø (4 uds)
1 x	Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th
1 x	Combo 4 pcs AXI 2204 Multicopter
1 x	1804 2400KV Brushless Motor Qav 250 mini
1 x	Carbon plate 350x150x1.5 mm
1 x	Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm)
1 x	Charger ISDT 608AC 200W
1 x	Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm)
1 x	82 mm 12 mm axi 30 g F3A CF drilled spinner
1 x	Spinner INO 82 mm Chrome (Imitacion metal)
1 x	102 mm INO spinner (carbon imitation)
1 x	Aluminum Fold Prop Spinner 30 mm / 5.0 mm
1 x	Carburator Moki S400
1 x	Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm)
1 x	Carbon plate 500x400x2.0 mm ISOTECH
1 x	Connectors banna oro 2 mm (M/F)
1 x	Carburator Moki S 180
1 x	PowerBox OLED display
1 x	Spinner Alumin. fixed propeller 45 mm / 6,0 mm
1 x	Spinner 104x131 mm 115 g CFK-BS
1 x	Aluminum Fold Prop Spinner 34 mm / 3 mm
1 x	89 mm INO spinner (carbon imitation)
1 x	82 mm 12 mm axi 30 g F3A CF drilled spinner 3BL
1 x	63 mm INO spinner (carbon imitation)
1 x	57 mm INO spinner (carbon imitation)
1 x	Spinner INO 70 mm Chrome (Imitacion metal)
1 x	White Fold Prop Spinner 38 mm / 5 mm shaft / 8 mm propellers
1 x	Spinner INOVA 102 mm Black
1 x	51 mm INO spinner (carbon imitation)
1 x	Aluminum Fold Prop Spinner 38 mm / 5 mm
1 x	Spinner INO 51 mm Chrome (Imitacion metal)
1 x	Spinner Alumin. propeller pleg. 30 mm / 4,0 mm
1 x	82 mm INO spinner (carbon imitation)
1 x	Spinner Alumin. fixed propeller 45 mm / 4,0 mm
1 x	Spinner Alumin. propeller pleg. 30 mm / 5,0 mm
1 x	Spinner INO 75 mm Chrome (Imitacion metal)
1 x	Spinner Alumin. fixed propeller 50 mm / 6,0 mm
1 x	Aluminum Fold Prop Spinner 30 mm / 3.17 mm
1 x	70 mm INO spinner (carbon imitation)
1 x	Spinner Alumin. fixed propeller 50 mm / 5,0 mm
1 x	F3A carbon 75 mm spinner for Hacker C-50
1 x	F3A carbon 95 mm spinner
1 x	Spinner INOVA 63 mm White
1 x	Spinner Alumin. fixed propeller 45 mm / 3,2 mm
1 x	Propeller Pleg CAM Carbon 14x6
1 x	TRAINER RC Pilot V2 90" w/r ARF
1 x	PowerBox iGyro SRS + GPS Modul
1 x	PowerBox Competition
1 x	PowerBox PIONEER incl. microSwitch
1 x	PowerBox DigiSwitch V2 JR/JR
1 x	Extension for SensorSwitch 30cm
1 x	Extension for LC-Display 50cm
1 x	Safetyclip MPX (6 pcs)
1 x	Round Rod 3,0x1000 mm
1 x	Large flex hinge (12 uds)
1 x	Glases Nimbus "Black"
1 x	Boomerang SPRINT V2 Red/Yellow
1 x	RANGER Jet CANADA 1.854mm combo
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs)
1 x	RANGER Jet Red/Yellow 1.854mm combo
1 x	TURBINATOR 2 RED/WHITE 1778 mm Combo
1 x	VIPER JET 2.2m + Electric landig Gear Deco: 01 Red-Blac-kWhit
1 x	TURBINATOR 2 BLUE AND YELLOW 1778 mm Combo
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Wheel collar 3 mm Ø (4 uds)
1 x	Wing bolts M3 Steel screw blue (2 pcs)
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Big-Malibu XL Roof box with surfboard rack GREY
2 x	T-Motor MN705-S Kv125 (pack 2 uds)
2 x	Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr
1 x	70 mm aluminium spinner.
1 x	45x9 mm foam special light KOVO wheel with radius (2 pcs)
1 x	35x14 mm hard foam KOVO wheel (2 pcs)
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	38 mm aluminium spinner.
1 x	64 mm aluminium spinner
1 x	Copier 2x20 cm pcs
1 x	Copier 5x20 cm pcs
1 x	Crystal Universal RX 35.150 Ch 75
1 x	Connectors DEANS (T) micro
1 x	DLE Ignition unit
1 x	Drilling-template set for Moki engines Moki S150, S180, S215, S2
1 x	Cut tube
1 x	Dean-T Plug Mold
1 x	Crystal Universal RX 35.070 Ch 67
1 x	Crystal Universal RX 35.170 Ch 77
1 x	RANGER Jet NAVY 1.854mm combo
1 x	DJI FPV Combo
1 x	ESC ALPHA 60A HV

23,766.90EUR