1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Comentarios
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
1 x Aro metalico delantero FEMA
4 x Set freno para ruedas Dia. 127 mm
4 x Tren retráctil veleros 3-7 Kg 3.8-4.3 (sin rueda) 70-82 mm
1 x Soporte reenvio para freno retractil
1 x Tren retráctil veleros 8-16 Kg 2.5-3.2 (rueda 140 mm con freno)
2 x Tren retráctil veleros 8-16 Kg 2.5-3.2 (sin rueda) 140 mm
1 x Tren retráctil
1 x Sandwich carbon + poplar 3mm + carbon 290x160 mm
1 x Helice APC 14x8.5 Electric Pusher
2 x Soporte para aviones
1 x Soporte para aviones SebArt
1 x Equilibrador hélices
1 x Equilibrador hélices
2 x Medidor angulos y/o incidencias
2 x Carro remolque para veleros 720 x 239 mm
1 x Medidor de incidencias
2 x Soporte WingFix ULTRA BE
1 x Gancho remolque inferior plano
1 x Gancho de lanzamiento fijo
1 x Gancho de remolque hasta 3m
1 x Bancada servo gancho
1 x Gancho de remolcador
1 x Gancho de lanzamiento regulable
1 x Varilla latón hexagonal Ø 5 mm x 1000 mm
1 x Prolongador S-Bus JR/JR 10cm
1 x Canal de ABS de 1,0x2,0x1000 mm
1 x Catapulta Vasa model
1 x Soporte Angular conector XT-60 (2 pcs)
1 x Soporte montaje servos Std. apaisado
1 x Brazo servo 38 mm Futaba con rótula
1 x Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x Servo MKS HV69
1 x Suncover 100cc Red
1 x Servo MKS HV 777A+
1 x Brazo servo doble aluminio V3-Hitec 3,5" azul
1 x Servo SAVOX SH 0257 MG
1 x Brazo servo aluminio V1-Hitec 1,25" M3 azul
1 x Bancada servo tandem 4,5-5" para 2 servos
1 x Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox
1 x Servo HITEC D145 SW
1 x Brazo servo aluminio 15-10 mm HITEC
1 x Servo SAVOX SV-0236 MG HV
1 x Servo FUTABA HPS-A700 Digital S-Bus
1 x Servo FUTABA SBL 471 SV
1 x Servo FUTABA S 9670 SV
1 x Servo FUTABA S 3072 HV S-Bus
1 x Caja servo BLS-152 / 172
1 x Eje rueda con accesorios
2 x Tren retráctil veleros 12-25 Kg 2-2.8 (sin rueda) 165 mm
1 x USB Adaptor OPTronics
1 x Varilla mando doble roscada aluminio M3 80 mm (2 pcs)
1 x HOPPER tank Digitech 250 ml (Festo nipples 6 mm)
1 x GPS Sensor + Logger OPTronics
1 x Valvula one-way gasolina small
3 x Tren retráctil veleros 8-16 Kg 2.5-3.2 (rueda 127 mm)
2 x Medidor ángulos
1 x Liston ABS 1,5x8,0x1000 mm
1 x Liston ABS I 3,5x1,75x330 mm
1 x Varilla ABS 4,0x1000 mm
1 x Liston ABS I 2,5x1,25x330 mm
1 x Batería Sanyo Eneloop RX 4,8 V Futaba
1 x Hélice POWER-PROP 13x9 Izda
1 x Hélice POWER-PROP 14x10
1 x Hélice POWER-PROP 14x8
1 x Hélice POWER-PROP 10x7 Izda
1 x Combustible Glow 4T "KAVAN" air/heli 15% nitro
1 x Combustible Glow "KAVAN" air/heli 5% nitro
3 x Medidor angulos tamaño pequeño
1 x Adaptador para rotula/Quick Link M3x20 Ø 5 mm (4 pcs)
1 x Brazo servo 25 mm Futaba con rótula
1 x Brazo servo 52 mm Hitec
1 x Conector de seguridad para servos (10 pcs)
1 x Brazo servo 38 mm Hitec con rótula
1 x Brazo servo 20 mm FUTABA con rótula
1 x Brazo servo doble pull-pull 76/92 mm Futaba con rótulas
1 x Brazo servo doble 2x20 mm Futaba
1 x Brazo servo 52 mm Futaba
1 x Brazo Servo XTorque 52 mm HITEC 25T-6
1 x Guardabarros ruedas 112/127 mm
1 x Set montaje amortiguador para modelos 8-16 Kg
1 x Servo GO-13 MG 13g 2.8 Kg 0.12s/60º
1 x Plancha carbono 350x150x1.0 mm
1 x Interface REVOLECTRIX USB para CellPRO 10s
1 x Servo FUTABA BLS175 SV
1 x Servo FUTABA BLS172 SV
1 x Brazo servo aluminio V1-Futaba 1,0" M2 rojo
1 x Piñones servo FUTABA BLS255/272/471SV
1 x Piñones servo FUTABA 3010
1 x Servo FUTABA S 3071 HV S-Bus
1 x Empenaje de cola LA500
1 x Set de piñones metálicos HS85MG/5085MG
1 x MIG 29 3D RTF, Servo
1 x Hélice POWER-PROP 14x9
1 x Hélice Electric Carbon 9.5x5
1 x Piloto civil "G-Man" tamaño 9cm (Slimline)
1 x Adaptadores carga 6s JST-XH
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x Bayoneta aluminio ø30×1 mm x 1m
1 x Modulo reglaje avance V3
1 x Refueling Cap V3 Black
1 x Telemetria XYCOY adapter
1 x JETI SPIN 80 Pro
1 x Bomba electrica Fuel 12v
1 x Plancha contrachapado Abedul 600x300x0,8 mm
1 x Parte central del cíclico LA500
1 x Tren retráctil veleros hasta 2 Kg
1 x Elevador Cierva C30
1 x Grub screw M3x3 shouldered (2 pcs)
1 x Elevador Rotorshape
1 x Sistema cierre negro doble cara 20x1000 mm
1 x Actuador electrico 25 mm HIGH TORQUE
1 x Perfil de ABS "L" 3,0x3,0x1000 mm
1 x F1 Prop Cap Can (Conector para la botella de combustible)
1 x Piloto "Goose" (Slimline)
1 x Escape Pitts SLIMLINE D.A. 100 (2pcs)
1 x Piloto civil "Curt" tamaño 9cm (Slimline)
1 x Escape Pitts OS MAX.35.40 FP
1 x Piloto militar "Kamikaze" tamaño 9cm (Slimline)
1 x Piloto "Dick" Legends Series(Slimline)
1 x Escape Pitts D.A. 70
1 x Piloto militar "Fly Boy" tamaño 9cm (Slimline)
1 x Piloto "Adolf" Legends Series(Slimline)
1 x Arrancador EM Gear Power 80
1 x Camara USB micro endoscopica
1 x Hélice POWER-PROP 9x5
7,071.63EUR
Fabricantes
Información del Fabricante
Saito
Otros productos
Idiomas
Español English
Monedas