Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Brazo servo MKS Doble Metal L:2.5/3 inc
26.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	PPM Encoder Module
2 x	PIX Hawk with accesories
1 x	DYNAMOMETER S-1580
1 x	Quicklock washer 4 mm (10 pcs)
1 x	Circlik for shaft 2.3 mm (10 pcs)
3 x	SE Ring 350 mm (2 pcs)
2 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Aluminium cap bolt washer M3 black (8 pcs)
3 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	Cinta Goldfix 1m
1 x	Lock washer 2.7 mm (20 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Quicklock washer 1.5 mm (10 pcs)
1 x	Aluminium cap bolt washer M3 red (8 pcs)
1 x	SE Ring 360 mm (2 pcs)
1 x	Lock washer 2.2 mm (20 pcs)
1 x	Aluminium wide washer M3 gold (4 pcs)
1 x	Spring lock washer 4.1 mm (20 pcs)
1 x	Circlik for shaft 1.5 mm (10 pcs)
3 x	Circlik for shaft 1.9 mm (10 pcs)
1 x	SE Ring 450 mm (2 pcs)
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	SE Ring 400 mm (2 pcs)
2 x	Aluminium cap bolt washer M3 green (8 pcs)
1 x	Spring lock washer 3.1 mm (20 pcs)
2 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	Foil for sticking flaps and ailerons
2 x	SE Ring HACKER 300 mm (2 pcs)
2 x	Ring 320 mm length (5 pcs)
1 x	Linden wood slat 2.0x2.0x1000 mm
2 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Beech dowels 2.0 x 1000 mm
1 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	BALSA trip 10x10x1000 mm
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	BALSA triangular 15x15x1000 mm
1 x	BALSA triangular 8x8x1000 mm
2 x	Trailing edge BALSA 35x8x1000 mm
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	Pine wood slat 1.5x3.0x1000 mm
2 x	Mahogany wood slat 1.5x1.5x1000 mm
2 x	U Profile ABS 8,0x4,0x1000 mm
2 x	U Profile ABS 1,0x2,0x1000 mm
2 x	U Profile ABS 3,0x6,0x1000 mm
1 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	Profile ABS half cane 2.5x1000 mm
1 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x	U Profile ABS 5,0x10,0x1000 mm
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	ABS angle 3,0x3,0x1000 mm
1 x	T-Connector 4.0 mm x 1000 mm
1 x	U Profile ABS 2,0x4,0x1000 mm
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x	Profile ABS half cane 3x1000 mm
1 x	ABS angle 5,0x5,0x1000 mm
1 x	Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
2 x	Streamline Stainless Steel Tubing 11.5x6.5x1000 m
2 x	Profile ABS Square 2 x 1000 mm
1 x	ABS "T" angle 8.0x8.0x1000 mm
3 x	ABS angle 6,0x6,0x1000 mm
1 x	Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	Profile ABS half cane 2.0x1000 mm
1 x	ABS angle 4,0x4,0x1000 mm
1 x	Flat Connector 4.0 mm x 1000 mm
2 x	L-Connector 1.5 mm x 1000 mm
1 x	L-Connector 4.0 mm x 1000 mm
1 x	Profile ABS Square 3 x 1000 mm
2 x	Profile ABS Square 4 x 1000 mm
1 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
2 x	Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
1 x	Locking cable tie 3.2x142 (uds)
1 x	Support Antena 2.4 Ghz (2 pcs)
3 x	Support pump Xicoy X45
1 x	Aluminium wide washer M4 Red (4 pcs)
2 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	Marker ties (20 pcs)
2 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
2 x
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Threaded insert M3 (4 pcs)
1 x	Hexagonal Nut M2.5 (10 pcs)
1 x	Balsa panel 5.0x100x1000 mm
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	Tape GFK 38 mm
1 x	SE Ring 250 mm (2 pcs)
1 x	Beech dowels 10 mm x 1000 mm
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	Tape GFK 50 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	SE Ring 480 mm (2 pcs)
2 x	BALSA trip 3.0x3.0x1000 mm
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	Birch plywood plate 600x300x4.0 mm
1 x	A/C quality beech plywood 1520x750x4.0 mm
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Blind nut M2 (10 pcs)
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	Aluminium wide washer M4 Blue (4 pcs)
1 x	Hexagonal Nut M1 (10 pcs)
1 x	Quicklock washer 2.5 mm (10 pcs)
1 x	Quicklock washer 2 mm (10 pcs)
1 x	Balsa panel 8.0x100x1000 mm
2 x	Balsa panel 1.5x100x1000 mm
1 x	Quicklock washer 1 mm (10 pcs)
1 x	Tape GFK 25 mm
2 x	Linden wood slat 3.0x3.0x1000 mm
1 x	20x1000 mm Ring Strap Back To Back
1 x	Birch plywood plate 600x300x1.5 mm
2 x	BALSA trip 8.0x8.0x1000 mm
2 x	BALSA trip 2.0x2.0x1000 mm
1 x	Spring lock washer 2.1 mm (20 pcs)
1 x	Balsa panel 4.0x100x1000 mm
1 x	Blind nut M4 (4 pcs)
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	Lock nut M5 (20 pcs)
1 x	Balsa panel 1.0x100x1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
2 x	SE Ring 330 mm (4 pcs)
1 x	Blind nut M3 (4 pcs)
1 x	quality beech plywood BIRCH 600x300x2.0 mm
1 x	Pine wood slat 10x10x1000 mm
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
2 x	BALSA triangular 10x10x1000 mm
1 x	Flat washer 3.2 mm (20 pcs)
1 x	Beech dowels 4.0 x 1000 mm
1 x	Oratex White 2m
1 x	Ferrita 14x8x5.5 mm
1 x	PS-050 TONEGAWA Servo
2 x	Profile ABS half cane 6.0x1000 mm
2 x	Profile ABS half cane 4x1000 mm
2 x	Profile ABS half cane 7.0x1000 mm
1 x	Soporte grifo FESTO (2 pcs)
1 x	Tube support Ø 6mm (10 pcs)
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Recessed MPX connector support (6 pcs)
1 x	Support pumb/filter Xicoy X45
1 x	Support Pitot JETI
1 x	Soporte filtro FESTO (4 pcs)
1 x	Angle support XT60 conector
2 x	Support XT60 conector (2 pcs)
1 x	EXTRA NG 85" 2159mm red/white
1 x	Screw M2.5x10 (10 pcs)
1 x	Epoxy Resin L + Hardener GL 1 (30 min)
1 x	Epoxy 30 min. 200g
1 x	Epoxy 40 min (Resin). 25Kg
1 x	Epoxy Resin L + Hardener L (40 min) 1Kg (715g Resin L + 285g Har
1 x	Red smoke bombs AX-60 (5 pcs)
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
2 x	SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm
1 x	PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF
1 x	M3-M4 rubber washer (8 pcs)
1 x	5 mm Prop Adapter CN-Spinner
1 x	6 mm Prop Adapter M8
1 x	3,2 mm Prop Adapter M8
1 x	5 mm Prop Adapter M6
1 x	3 mm Prop Adapter M6
1 x	2.3 mm Adapter for 30 mm spinners
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	SE Ring 240 mm (2 pcs)
1 x	Balsa panel 6.0x100x1000 mm
1 x	SSPS105 Super Hi-Power servo
1 x	Tapping Screw M2.9x13 (10 pcs)
1 x	4,8x1000 mm 2:1 black termoretract tube
1 x	Circlik for shaft 1.2 mm (10 pcs)
1 x	4,8x1000 mm 2:1 red termoretract tube
1 x	Tapping Screw M2.2x9.5 (10 pcs)
1 x	3 LiPo XH>EH adapter
1 x	1,2x1000 mm 2:1 black termoretract tube
1 x	Epoxy Resin L + Hardener L (40 min) 3.5 Kg (2.5 kg Resin L + 1 k
1 x	Epoxy 5 min. 500 g (Hardener)
1 x	Epoxy 10 min 190g
1 x	Plastic caps for AIR BURTS (30 pcs)
1 x	Remote electric ignition system
1 x	White smoke bombs AX-9 (10 pcs)
1 x	AX-60 starters (5 pcs)
1 x	800TVL CMOS camera for FPV
1 x	USB Mini Camera endoscope
1 x	SD HC 8 GB
1 x	Baseplate servo
1 x	19.5x13 Falcon electric 3-Blade carbon prop (54 g)
1 x	FALCON 25X9 CARBON PROPELLER (GAS)
1 x	Propeller FALCON 5-BL 24x23.5
1 x	Propeller POWER-PROP 13x8
1 x	Propeller MASTER 5,5x4,5
1 x	Propeller MASTER AIRSCREW 12x8
1 x	Profile ABS Square 1 x 1000 mm
1 x	Helice CLASSIC-Prop 20x10
1 x	Propeller MASTER AIRSCREW 9x6
1 x	Profile ABS half cane 5.0x1000 mm
1 x	ABS angle 1.5x1.5x1000 mm
1 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x	Profile ABS half cane 4x2.5x1000 mm
1 x	12x8 tree blades propeller
1 x	Epoxy 40 min. 4kg (Hardener)
1 x	Epoxy adhesivo Elan-tech ADH 981.892 50ml (dark grey)
1 x	Support ECU Xicoy X-45

10,768.28EUR