Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA85080

16.00EUR

EWC3 40 cm wing connector
[EMCA85080]

EWC3 40 cm wing connector

The ingenious plug system for R/C modelling!
- reverse polarity protected
- high current qualified (up to 12A per contact)
- 100% safe connection because of locking
- small construction form due to 2,54 mm contact spacing
- easy mounting due to packaging
- strong high flexible cable with 0.34mm² (AWG22) cross section
- single connector version for up to two servos

The EWC (EMCOTEC wing connector) is a new plug system for R/C modelling. High value plugs "made in Germany" with a resistance of <20mOhm quarantee best contact safety. The crimp contacts are locked twice and reach best tensile force. The cable plug engages with the multipole connector on the PCB. So it's protected against accidental release for example due to vibrations.

The servo connection cable will be soldered directly to the PCB. Also 2 cables (one above one below) can be soldered, that results a kind of a v-cable. The servo cable can be fixed with a cable tie and a shrinking hose on the PCB if required. The complete PCB with the multipole connector can be fixed in the wing root of the model.

The counterpart (connector socket) is equipped with a strong 0.34mm² servo cable. The cable goes to the receiver or to the servo connector of a dual power supply.

Delivery includes EWC set consisting of EWC PCB with mounted plug, cable ties and shrinking hose, EWC connection cable (JR) 40cm (15.75in) with lockable counterpart connector socket.

temporarily out of stock

Reviews

Customers who bought this product also purchased

DUPLEX 2.4EX MU 3 Sensor temporarily out of stock	Quick hose connector 4-4 mm temporarily out of stock	Spinner 159x200 mm GFK temporarily out of stock
Servo Mount M (blue) temporarily out of stock	Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) temporarily out of stock	Servo HITEC D951 TW temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

PT-22 Ryan Recruit 2290 mm (SEAGULL)
560.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

3 x	Canopy Lock V1 M3 Blue (2 pcs)
2 x	Aluminun wheel collar 6 mm Ø (4 uds)
3 x	Aluminun wheel collar 5 mm Ø (4 uds)
1 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x	Clip mini fixing for wing (2 pcs)
1 x	Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x	Cable grommet Ø 4 mm (4 uds)
1 x	Cockpit aluminium closing
3 x	45 mm rods set for direction control
2 x	28x5 mm wires output (2 pcs)
1 x	Cable grommet Ø 3.2 mm (4 uds)
1 x	Clip fixing for wing (2 pcs)
1 x	Allen wheel collar M4x4
1 x	Canopy Latch
1 x	Aluminun wheel collar 4 mm Ø (4 uds)
1 x	Allen wheel collar M3x3
2 x	Allen wheel collar M4x6
2 x	Cable tie mounts 4.3 (4 uds)
2 x	80 mm rods set for direction control
2 x	100 mm rods set for direction control
3 x	Aluminium alloy coupler for carbon tube 6/M4
3 x	11 mm Rubber pads (14 pcs)
1 x	140 mm rods + T patellas set for direction control
2 x	Aluminun wheel collar 3 mm Ø (4 uds)
4 x	Canopy Lock V1 M3 Red (2 pcs)
2 x	Cabin latch Fox MDM1 4m (pair)
1 x	100 mm rods + T patellas set for direction control
1 x	Allen wheel collar M3x5
2 x	Cable grommet Ø 5 mm (4 uds)
2 x	Aluminun wheel collar 2 mm Ø (4 uds)
2 x	45 mm rods + T patellas set for direction control
1 x	38x4,5 mm wires output (2 pcs)
3 x	Pilot "Dick" Legends Series (Slimline)
1 x	Civilian pilot "G-Man" size 9cm (Slimline)
1 x	1/10 Pilot "Jimmy"
1 x	Piloto Jet "Red" 1/6 Scale
1 x	Piloto JET 1:3,5
1 x	Piloto RC Civil 1/5- 1/6 Scale 12"
2 x	1/10 Pilot "Jack"
1 x	1/6 Pilot "Garry"
2 x	1/7 Pilot "Japanese"
2 x	1/12 Pilot "Tom"
1 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x	1/12 Pilot "Fighter"
1 x	1/6 Pilot "Buddy"
2 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	1/6 Pilot "Tony"
1 x	1/4 Pilot "Mike"
1 x	1/4 Pilot "Heidi"
1 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
2 x	Pilot "Anthony" (Slimline)
2 x	Pushrod octagone 3/2
1 x	Wheel collar 6 mm Ø (4 uds)
1 x	Wheel collar 3.5 mm Ø (4 uds)
1 x	STEERING FRONT WHEEL SYSTEM BIDULE 55
1 x	STEERING FRONT WHEEL SYSTEM BIDULE 111
2 x	Pushrod octagone 3/2 with coupler M2
1 x	Tip wing protector 30x10 (2 pcs)
1 x	Tip wing protector 28x10x12 (2 pcs)
1 x	Wheel collar 3 mm Ø (4 uds)
1 x	Pushrod greyline 3/2 with coupler M3 L: 1000 mm
2 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
4 x
2 x	USB Mini Camera endoscope
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
2 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Locking cable tie 3.2x142 (uds)
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	SUS wire 3m (nylon coated)
1 x	One touch canopy lock
2 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
2 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Steering arm 12 mm Ø 4 mm
1 x	Electric spoiler 250 mm (2 pcs)
1 x	Steering arm 16 mm Ø 3 mm
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	Straightened rod Ø 2.0 mm x 1000 mm
1 x	200m servo "Premium" wire (white/red/blue)
1 x	250 mm / 16 mm Airbrakes
1 x	Piloto Jet "Green" 1/6 Scale
3 x	Piloto jet 130 mm
1 x	1/6 Pilot "Cindy"
1 x	Militarian pilot "Fly Boy" size 9cm (Slimline)
2 x	1/12 Pilot "Cougar"
1 x	Pilot JAN 1/4 Saiplanes
1 x	6 mm red aluminium threaded horn with patella
1 x	Wing bolts M6 Steel screw Red (2 pcs)
3 x	Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs)
1 x	Pushrod octagone 4/3
1 x	4 LiPo XH>EH adapter
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	4 mm M3 red control terminal (4 pcs)
1 x	Landing gear frontal support 25x32x16
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	Servo NARO Max Std
1 x	Combo RAY C3542-1000 + ESC 60A
1 x	Press fitting for 1,0 diam. steel cable (10 pcs)
1 x	Snap long M2 (10 uds)
1 x	65 mm mini servo cover
1 x	Angle measurer
1 x	Locking cable tie 4.6x203 (uds)
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Snap for floding prop for 2 mm axi
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	Pushrod greyline 3/2 with coupler M2
1 x	Adapter lead MPX/EC3
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs)
1 x	CC 03
1 x	Split pin 1x8 mm (10 uds)
1 x	Fully Threaded Steel Rod M2,0 (2 uds) 250mm
1 x	Battery RX JETI LiIon RB 2600 7.2v
1 x	Battery RX JETI LiIon RB 5200 7.2v
1 x	Electric Landing Gear "Black Edition" BULL Mo1 2.6 (Elektron Re
1 x	EDGE 540-A 74" (1880 mm)
1 x	SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm
1 x	MB-339 Aerofoam G2 "Italian Air Force Camu"
1 x	Pilot "Goose" (Slimline)
1 x	Giant Scale Muffler D.A. 70
1 x	Electric Landing Gear "Black Edition" BULL Mo1 2.6 GS200 (Electr
1 x	1/6 Pilot "John"
1 x	Pipa 3D BULL MØ1 2.600mm
1 x	Electric Landing Gear BULL Mo1 2.6 (Elektron Retracts)
1 x	Astra wing Joinner (Top Model)
1 x	CYCLONE XT 6.2m ARF
1 x	Ion Pro NG electric with flaps GREEN Fluor (JP Model)
1 x	Fascination 3600 mm, Spare Wings (Top Model)
1 x	Aero-Master Cabine (Aero-naut)
1 x	ASG 32 560 mm
1 x	Hardener Aero EPH 161 (500 g)
1 x	Hardener Aero EPH 161 (250 g)
1 x	EXTRA 330 LX 2.34m ARF (LX-09) Pilot
1 x	Propeller APC 12x4.5 MR
1 x	Propeller APC 11x7 SF
1 x	SERVO DES 588 BB MG
1 x	EasyFLY Addon
1 x	PPS-4D Propeller
1 x	Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled
1 x	EASYGLIDER 4 RR
1 x	Fournier RF-4D
1 x	Aero-Master Wings (Aero-naut)
1 x	ALBATROS 3.0 m (orange/white)
1 x	Fascination 3600 mm, Canopy (Top Model)
1 x	FANTASY ARF 3.2m
1 x	ACTIVE ARF Electric 1.995 mm
1 x	IKURA 4.0 m
1 x	Albatros red/white (Top Model)
1 x	IMPULSE 2 F3F
1 x	Avia spare blue cockpit (Top Model)
1 x	HERON RR
1 x	Ion Pro NG electric with flaps ORANGE (JP Model)
1 x	Albatros ,spare fuselage (Top Model)
1 x	Ventus 1:4 set of instruments
1 x	Towing hook <3m
1 x	Towing hook
1 x	Swift S1 De-luxe JEPPESEN 3.140 mm
1 x	Truck-trailer for gliders 720 x 239 mm
1 x	Ventus 2cx 4.5 m Winglets
1 x	resin-hardener package L-385 with hardener H-385 (875 g)
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg
1 x	resin-hardener L-385 H-385 (625 g)
1 x	Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs
1 x	Parachute XTRALITE S
1 x	PARTALL® Hi-Temp Wax, 340 g
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	Straightened rod Ø 0.5 mm x 1000 mm

22,356.09EUR