120.00EUR

Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
[KAV30.1638C]


Combo set of BLS motor with 80A ESC for model aircraft: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 rpm per V, power supply Lixx 3-4s, shaft 5 mm.

Outrunner brushless electric motor for model aeroplanes: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 RPM/V, input voltage 3-4S Lixx. 5.0mm shaft. Alternative designation based on the stator dimension: 2820-1150. KAVAN PRO series motors are high performance 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high quality ball bearings, High grade material used for stators and rotors ensure long lifetime and unbeatable performance and high efficiency. KAVAN PRO series motors are low revolution/high torque electric motors capable of swinging large diameter propellers without need for a gearbox.
KAVAN PRO 3542-1150 is a motor for model aeroplanes up to 2200 g all-up weight powered by 3-4S LiPo flight battery pack. It is great for faster 2000-2500 mm electric powered gliders, 1400-1500 mm high wing trainers, scale and aerobatic models.
Motor installation: KAVAN 3542-1150 has been designed both for the front and radial mount installation. Front mount: Use four M3 screws; these may not go deeper than 3-4 mm into the front case. Radial mount: Use four M3 screws to secure the mounting cross to the firewall. The firewall should be made of 4.0-5.0 mm plywood. The radial mount set is supplied with the motor.
The motor set contents: KAVAN PRO 3542-1150 motor w. cables (3.5 mm gold-plated connectors), radial mount set accessories. The full instruction manual can be downloaded here: KAVAN PRO Brushless Motors Instruction Manual
Note: Alternative designation based on the stator dimensions: 2820-1150.
Powering LiXX cells 3 - 4
RPM/V [ot./min/V] 1150
Max. power (180 s) [W] 1000
Internal resistance [mOhm] 16
Open-circuit current (při 10 V) [A] 2.7
Max. peak current (180 s) [A] 70
Diameter [mm] 35.2
Length [mm] 41
Length celková [mm] 63.5
Shaft diameter [mm] 5
Weight [g] 141
Poles count 14
Timing [°] 20 - 25
ESC [A] 70 - 80
Weight of glider (up-to) [g] 2200
Weight of trainer (up-to) [g] 2100
Weight of acrobat (up-to) [g] 1800
Weight of 3D (up-to) [g] 1200
Doporučená vrtule 3S: 11x8"-12x6"
4S: 9x6"-10x5.5”


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x Buy Perforated film 100 cm / 50 m
1 x Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x Carbon fibre sleeve 12k 170 mm x 5m
1 x ABS 500 x 400 x 2,0 mm (white)
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x ABS 500 x 400 x 1,5 mm (white)
1 x Buy Perforated film 100 cm / 10 m
1 x ARAMID honeycomb 1300x2600x2 mm
1 x Aluminium sheet 500x250x0,5mm
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
3 x SE Ring 200 mm (2 pcs)
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x Tape GFK 25 mm
3 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x SE Ring HACKER 300 mm (2 pcs)
1 x SE Ring 400 mm (2 pcs)
2 x SE Ring 240 mm (2 pcs)
2 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x SE Ring 360 mm (2 pcs)
2 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x SE Ring 450 mm (2 pcs)
2 x Tape GFK 50 mm
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x Spray YELLOW Inca Lexan 150ml
1 x Spray adhesive AEROFIX 2
1 x Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x Release wax 250ml
1 x Nitroverdu 500 ml
1 x 
2 x Extension 90 cm (Futaba)
2 x Extension silicon 30 cm male (Graupner)
1 x servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x Extension PVC 150 cm (Graupner)
1 x Cable silicona macho batt. receptor 30 cm (Graupner)
1 x Cap Hispano Aviación
1 x Hovercraft sailcloth
2 x 2000A 12V Lithium Jump Starter with 150PSI Air inflator
2 x Xplorer1 anemometro
1 x Xplorer4 anemometro
1 x Xplorer3 anemometro
1 x 
1 x Profile ABS Square 3 x 1000 mm
1 x Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x Oratex Yellow Cub 10 m
1 x Straightened rod Ø 5.0 mm x 1000 mm
1 x One touch canopy lock
1 x Cierre cabina aluminio Ø4, I=10 mm
1 x SE Ring 350 mm (2 pcs)
4 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x SE Ring 300 mm (2 pcs)
1 x Aro pasacable Ø20 mm (4 pcs)
2 x Support Antena 2.4 Ghz (2 pcs)
2 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x Partall paste 650 g
1 x Plasti Dip Liquid Tape 429 ml orange
1 x 1000 ml sealer (DOPE)
1 x 20 g tin paste
2 x Paint gun for sprays
1 x SE Ring 480 mm (2 pcs)
1 x Plasti Dip Liquid Tape 429 ml black
1 x Spannlack 1000 ml
1 x Premium servo extension 50cm
2 x Cable silicona female batt. receptor 30 cm (Futaba)
2 x Extension 15 cm (Futaba)
1 x Extension silicon 30 cm male (Futaba)
1 x Cabel "Y" 30 cm (graupner)
1 x Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x Extension silicon 100 cm (Futaba)
1 x Prolongador S-Bus JR/JR 10cm
1 x Premium servo extension 25cm
1 x silicon 100 cm Futaba Extension Ø 0,35 mm
2 x Premium servo extension 100cm
1 x Cable S.BUS 3 salidas 300 mm
1 x Premium servo extension 75cm
1 x Extension silicon 75 cm (Graupner)
1 x 
1 x Cabel "Y" 15 cm
1 x Futaba Female 40 cm extension
1 x Servo KST HS08A Wing Servo - 5.2Kg.cm 0.11s 11.0g 8mm
1 x Servo KST BLS815 HV V2.0 Servo 20mm 70g 20Kg
1 x Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar
1 x Servo KST X15-1208 V8.0 13.5Kg HV
1 x Soporte servo KST X08/H and Plus
1 x Servo KST X10 V2.0 ala 10mm 28g 10.8Kg
1 x Servo KST A08H V6.0 3,2Kg HV
1 x Vest clothes Hispano Aviación
1 x Aluminium Hub for folding Props 55 mm M8 Shaft 6 mm
1 x Angle support XT60 conector
1 x Soporte grifo FESTO vertical (1 pcs)
2 x Axle for motor A30-XL V2
1 x Aluminium Hub "Z" for folding Props 30 mm M8 Shaft 5 mm
1 x Battery LiFe TopFuel 3100 mAh 3s MTAG 30C
1 x Esc MasterBasic 70SB
1 x Connectors banna oro 8,0 mm 5 pcs(Female)
1 x Pasacables rectangular 40x15 mm (4 pcs)
1 x Alu-Cross for Backmount of A60-V2-Backmountmotors
1 x 30 cm BEC cable (male)
1 x 6,4x1000 mm 2:1 blue termoretract tube
1 x 2 mm male connector (2 pcs) with safety connector
1 x 1,2x1000 mm 2:1 black termoretract tube
1 x Battery charging cable XT60
1 x EDF Stream-Fan 110mm kv780
1 x Aluminium Hub for folding Props 43 mm M8 Shaft 5 mm
1 x A50 Motor Mount Alu complete set
1 x Support pumb/filter Xicoy X45
1 x A30-M/L/XL Backmountset complete
1 x Support pump Xicoy X45
1 x A50 Backmountset complete V3/V4
1 x Recessed MPX connector support (6 pcs)
1 x Axle for motor A20-S (3 uds)
1 x 0,14 mm PVC servo wire extension, ZH micro conector.
1 x Motor Advance 50-6
1 x 165 mm PVC transparent battery termo-retract 165 mm (10 m)
1 x 4,8x1000 mm 2:1 blue termoretract tube
1 x 4 LiPo XH>EH adapter
1 x 2,4x1000 mm 2:1 black termoretract tube
1 x Motor Advance 30-10 F3A
1 x Motor OS 50 SX-Hyper
1 x Carburador OS (Type 40K) 46AXII
1 x 2 LiPo XH>EH adapter
1 x AXI 2820/14 V2 Long
1 x Motor A20-20 L EVO
1 x AXI 2826/6 V2 Long
1 x AXI 2826/10 V2
1 x AXI 2814/10 V2
1 x Motor A20-6 XL 10-Pole EVO + 4,4:1
1 x AXI 2217/12 V2
1 x AXI 2826/12 V2 Long
1 x 12V Car Adapter
1 x Charger 220/110v
1 x Plasti Dip Liquid Tape 429 ml black
1 x 12,7x1000 mm 2:1 green termoretract tube
1 x OS GT15 W/E-4040 for airplane
1 x Motor OS MAX 160 AX
1 x Motor OS FS 95 AX
1 x AXI 2814/12 V2
1 x Motor OS 3820-1200 electric
1 x AXI 2217/20 V2
1 x AXI 2820/12 V2 Long
1 x A60-6XS V4 28-Pole
1 x Backmountset complete A40
9,071.13EUR
Manufacturers
Manufacturer Info
Kavan
Other products
Languages
Español English
Currencies