Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


under request
under request

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
What's New?
Servo GO-1006MG (0.052s/60º, 3.0Kg)
Servo GO-1006MG (0.052s/60º, 3.0Kg)
52.00EUR
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Shopping Cart
1 x Cabin latch Fox MDM1 4m (pair)
1 x "S" set for planes
1 x Red smoke bombs AX-60 (5 pcs)
1 x White smoke canister 65 g
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Stainless steel cable Ø 0.5 mm (2 m)
2 x Steering arm 16 mm Ø 4 mm
1 x Red smoke canister 100 g
1 x Cockpit plastic closing
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x Smoke set "S"
1 x Screw-lock connector M2 (2 uds)
1 x Smoke set "M"
1 x White smoke canister 140 g
2 x Yellow smoke bombs AX-60 (5 pcs)
1 x Locking cable tie 2.5x100 (uds)
1 x White smoke bombs AX-18 (5 pcs)
2 x Blue smoke canister 100 g
1 x Screw-lock connector Ø 2 mm (2 uds)
1 x Remote electric ignition system
2 x Steering arm 12 mm Ø 4 mm (2 uds)
2 x Steering arm 16 mm Ø 4 mm (2 uds)
1 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x Red smoke canister 140 g
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Canopy Lock V1 M3 Red (2 pcs)
2 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Yellow smoke canister 65 g
1 x Steering arm 16 mm Ø 3 mm
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x Cierre cabina aluminio Ø4, I=10 mm
1 x PCARD Wireless System
1 x Electric spoiler 250 mm (2 pcs)
1 x SUS wire 3m (nylon coated)
1 x Crimping sleeves for cable 0.85 mm (10 pcs)
1 x Interface Realflight Simulator
1 x Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x Profile ABS Square 4 x 1000 mm
1 x Glases Stratus
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x Cable grommet Ø 4 mm (4 uds)
1 x Cable grommet Ø 6.4 mm (4 uds)
1 x 90 mm rods + T patellas set for direction control
1 x Initior Receiver FRX2 Wireless
2 x Carbon plate 350x150x1.0 mm
1 x Cable tie mounts 4.3 (4 uds)
1 x Allen wheel collar M3x3
1 x Black smoke bombs AX-60 (5 pcs)
1 x Green smoke canister 100 g
1 x 3l Smoke oil
1 x Aluminun wheel collar 5 mm Ø (4 uds)
1 x Blue smoke canister 140 g
1 x Triple rod con. 3mm Pushrod (2 pcs)
1 x Stainless steel cable Ø 0.62 mm (10 m)
1 x STEERING FRONT WHEEL SYSTEM BIDULE 111
1 x Tip wing protector 40x14 (2 pcs)
1 x Wheel collar 6 mm Ø (4 uds)
1 x ABS tube 8.0x6.0x1000 mm
1 x Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x ABS tube 5.0x3.0x1000 mm
1 x ABS tube 12.0x10.0x1000 mm
1 x ABS tube 3.0x1.0x1000 mm
1 x ABS tube 4.0x2.0x1000 mm
2 x ABS tube 10.0x8.0x1000 mm
1 x ABS tube 3.0x2.0x1000 mm
1 x Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
1 x ABS tube 8.0x7.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm)
1 x ABS tube 18.0x16.0x1000 mm
1 x ABS tube 4.0x3.0x1000 mm
1 x ABS tube 6.0x5.0x1000 mm
1 x Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
2 x Sanyo RX Battery Eneloop 6,0 V JR
1 x Pin to cable coupler M1,6 ⌀ (6 pcs)
1 x Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs)
1 x Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6
1 x Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x Carbon roving DowAksa / 24k / 1600 tex
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x SBEC 40
1 x SPARK Switch 12v
1 x Selfstart electronic switch
1 x Multi-adapter balancer JST/C - TP
2 x Sanyo TX Battery Eneloop 9,6 V Futaba
1 x Locking cable tie 4.6x203 (uds)
1 x Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs)
1 x Snap for floding prop for 2 mm axi
1 x Pushrod greyline 3/2 with coupler M3 L: 1000 mm
1 x Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod M2,0 (2 uds) 250mm
1 x Fully Threaded Steel Rod M3
1 x Snap short M2 (10 uds)
1 x Propeller CFK 18x19
1 x VPP system propeller for AXI VPP motors (spare)
1 x SBEC Jeti
1 x Covered closure or fairings
1 x Propeller CFK 16x13
1 x Propeller CFK 14x8 Slim
1 x Stainless steel cable Ø 1.3 mm (10 m)
1 x Propeller CFK 20x13
1 x Propeller CFK 12.75x13
1 x Propeller CFK 15x15
1 x Sukhoi 29S 2,6 m Yellow/Black (SebART)
1 x Wing bolts M6 Steel screw Blue (2 pcs)
1 x Wing bolts M3 Steel screw Red (2 pcs)
1 x Propeller CFK 18x16
1 x Wing bolts M3 Steel screw blue (2 pcs)
1 x Propeller RF CFK 13x7
1 x Sebart 2.2 m WHITE/BLUE (SebART)
1 x EDGE 540-A 74" (1880 mm)
1 x EXTRA 330L 35% hardware pack (Precision Aerobatics)
1 x PITTS CHALLENGER 87″ 2.20m (120cc) 02 ARF
1 x Propeller CFK 14.5x10 Slim
1 x Propeller CFK 15x16
1 x Propeller CFK 17x13
1 x GLOW 9C + accesories
1 x Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm)
1 x Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm)
1 x Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x ABS angle 10,0x10,0x1000 mm
1 x ABS angle 1.5x1.5x1000 mm
1 x ABS "T" angle 10.0x10.0x1000 mm
1 x Pulley brass 10/2 (2 pcs)
1 x Micro clevis (10 uds)
1 x Pulley brass 12/2 (2 pcs)
1 x White large kwik link (10 pcs)
1 x Carbon plate 550x350x4.0 mm ECOTECH
1 x Fiberglass plate 350x150x1.5 mm
1 x Fiberglass plate 350x150x2.5 mm
1 x Release film 100 cm x 50 m
1 x EVP Unit for AXI2208/xx and 2212/xx
1 x Fibreglass-Spinner BS ∅155 x 200 mm
1 x Landing gear axle Ø 5 mm (2 uds)
1 x Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm)
1 x Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm)
1 x Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm)
1 x ABS Strip 1.5x2.0x1000 mm
1 x 290 mm M4/M4 6.0x4.0 mm shaft ship
1 x 290x4 mm M4 shaft ship
1 x Rubber bushing with bracket "A" type (2 pcs)
1 x Sanyo TX Battery Eneloop 9,6 V 2500 mAh
1 x Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm
1 x Metal clevis M3 (10 uds)
1 x RX Battery Eneloop 4,8 V JR 2500 mAh
1 x Black large kwik link (10 pcs)
1 x Sanyo Eneloop AA 1,2 V 2400 mAh battery
1 x Metal clevis M2,5 (10 uds)
1 x GLOW 2C + accesories
1 x Pin 2,5 to cable coupler M2,5 ⌀ pin 2,5 (6 pcs)
1 x Sanyo Eneloop AA 1,2 V battery 2000 mAh
1 x Pulley brass 16/2 (2 pcs)
1 x Film release agent PVA 25 ml
1 x Carbon plate 550x350x1.5 mm ECOTECH
1 x Foam plastic plates (310x210x8 mm)
1 x Foam plastic plates (310x210x5 mm)
1 x Sandwich carbon + poplar 4mm + carbon 290x160 mm
1 x Sandwich carbon + poplar 2mm + carbon 480x290 mm
1 x Carbon plate 550x350x2.5 mm ECOTECH
1 x Sandwich carbon + poplar 3mm + carbon 290x160 mm
1 x Fiberglass plate 350x150x1.0 mm
1 x Fiberglass plate 620x540x3,2 mm
1 x Fiberglass plate 620x540x0,2 mm
1 x Fiberglass plate 620x540x1,0 mm
1 x Fiberglass plate 1200x1000x0,2 mm
1 x 290 mm M5 Prop shaft
1 x Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm
9,382.70EUR
Manufacturers
Manufacturer Info
Saito
- Other products
Notifications
NotificationsNotify me of updates to SAITO FG-120 TSS Boxer 4T
Reviews
Write ReviewWrite a review on this product!
Languages
Español English
Currencies
Insurance
multiseguros


Copyright © 2024 ROI Import
Powered by osCommerce