1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x PVC 0,08 qmm Futaba servos wire (5 m)
1 x 5 line servos wire black (1 m)
1 x Silicone 0,50 qmm servos wire Graupner(100 m)
1 x White silicone 0,25 qmm wire (100 m)
1 x Cable Cargador FUTABA
1 x 1 m servo "Premium" wire (white/red/blue)
2 x PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
1 x Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x Ventus 1:4 set of instruments
1 x Straightened rod Ø 5.5 mm x 1000 mm
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x Straightened rod Ø 2.0 mm x 1000 mm
1 x Straightened rod Ø 2.5 mm x 1000 mm
1 x Straightened rod Ø 0.8 mm x 1000 mm
1 x Straightened threaded rod M3 - 1m
1 x Straightened rod Ø 1.5 mm x 1500 mm
1 x Straightened rod Ø 1.5 mm x 1000 mm
1 x Brass rod Ø 1.5 mm x 1000 mm
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x Cabel "Y" 15 cm
1 x Aluminium cap bolt washer M4 green (8 pcs)
1 x Aluminium wide washer M4 Black (4 pcs)
1 x Cabel "Y" 30 cm (graupner)
1 x Extension silicon 10 cm (Graupner)
1 x Premium servo extension 100cm
1 x 50 mm gas motor standoff
1 x Extension 15 cm (Futaba)
1 x Extension silicon 30 cm male (Futaba)
1 x AL Axle Shaft 4.0x16 mm (2 uds)
1 x Extension silicon 75 cm (Graupner)
2 x Aluminium cap bolt washer M3 black (8 pcs)
1 x Extension silicon 75 cm (Futaba)
1 x Aluminium battery holder red
1 x Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x Extension silicon 10 cm (Futaba)
1 x Extension silicon 25 cm (Futaba)
1 x Futaba male 40 cm extension
1 x Cable silicona macho batt. receptor 30 cm (Graupner)
1 x Aluminium wide washer M3 red (4 pcs)
1 x 40 mm gas motor standoff
1 x 10 mm gas motor standoff
1 x 0,14 mm PVC servo wire extension, ZH micro conector.
1 x Aluminium red ball links M3 V1 (10 pcs)
1 x 11 mm Rubber pads (14 pcs)
1 x Extension silicon 35 cm (Futaba)
1 x Extension silicon 50 cm (Graupner)
1 x Extension silicon 100 cm (Futaba)
1 x Cable S.BUS 3 salidas 300 mm
1 x Extension silicon 25 cm (Graupner)
1 x 200 mm extensión servo HITEC/JR
1 x Extension 90 cm (Futaba)
1 x 45 mm gas motor standoff
1 x Antenna Hole Cap V1 (Silver)
1 x Aluminium cap bolt washer M3 blue (8 pcs)
1 x Aluminium blue ball links M3 V1 (10 pcs)
1 x Aluminium ignition bad (red)
1 x 15 mm gas motor standoff
1 x Canopy Latch
1 x Cabin latch Fox MDM1 4m (pair)
1 x Screw-lock connector M2 (2 uds)
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Cierva C30 spanish decoration Stickers
1 x Cierva C30 Body Spain
1 x Blade holder lower
1 x Aluminium wide washer M3 gold (4 pcs)
1 x Aluminium rod Ø 4.0 mm x 3000 mm
1 x Motor OS 3820-1200 electric
1 x Strip ABS 2.0x3.0x1000 mm
1 x Round Rod 6,0x1000 mm
1 x ABS Strip 1.0x5.0x1000 mm
1 x Round Rod 2,0x1000 mm
1 x Round Rod 1,0x1000 mm
1 x Round Rod 1,25x1000 mm
1 x Adaptadores carga 6s JST-XH
1 x Window mounting channel Type H 2.5x0.5 (2 m)
1 x Servo Mount S (red)
1 x wire tensioner (silver)
1 x PVC 0,14 qmm servo wire Futaba (5 m)
1 x Truck-trailer for gliders 720 x 239 mm
1 x Adaptador USB - YGE
1 x PSC 5
1 x Bidule 111 3000 mm Canopy
1 x Astra wing Joinner (Top Model)
1 x Propeller MASTER 5,5x4
1 x Rudder 2_Tray 4.5~5 inch
1 x 13 mm wing servo holder
1 x Propeller MENZ-S 20x10
1 x wire tensioner (black)
1 x Transmitter Stick Ends V5 Blue - M3 Futaba/Hitec/Spektrum DX8 (2
1 x Propeller 12x6 Falcon electric
1 x Propeller MENZ-S 18x10
1 x Propeller POWER-PROP 13x8
1 x Helice CLASSIC-Prop 20x10
1 x Propeller MASTER 7x4
1 x Propeller MASTER 7x6
1 x Ball link duraluminium M3 V1 (10 pcs)
1 x FALCON 24X9 CARBON PROPELLER (GAS)
1 x 8x6 tree blades propeller
1 x 9x7 tree blades propeller
1 x CC 03
1 x ESC YGE 90 HV F3A
1 x Prog Card V2 DUALSKY
1 x Propeller MEJLIK 16x11 3 Blades
1 x FALCON 24X10 CARBON PROPELLER (GAS)
1 x Transmitter Balancer Futaba T-10CG
1 x Universal Colour Paste white 50 g
1 x POLARON EX 800w charger
2,497.09EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies