Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

28x12 BIELA propeller (3-blades)
145.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

3 x	PIX Hawk with accesories
2 x	Tube Pitot to PIXHAWK
2 x	PPM Encoder Module
3 x	Locking cable tie 4.6x203 (uds)
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Steering arm 12 mm Ø 4 mm
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Electric spoiler 250 mm (2 pcs)
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Cockpit plastic closing
1 x	Steering arm 16 mm Ø 3 mm
2 x	Locking cable tie 2.5x100 (uds)
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Blue metalic ball link M3/3 azul (2 pcs)
1 x	M2,5 Diam metal short ball link V3 (2 pcs)
1 x	Short ball link M1.6 (6 uds)
1 x	3,0x60 mm allen screwdriver
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	Sun Cover PC 21 XXL (JMB Jets)
2 x	Support pump Xicoy X45
2 x	Aro pasacable Ø20 mm (4 pcs)
2 x	Soporte filtro FESTO (4 pcs)
1 x	Support pumb/filter Xicoy X45
3 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	Horn F3A de Titanium 16 mm (2 units)
1 x	Horn 6/20 with M3 Bearing
1 x	Extra-long adjustable aluminium control horn 2,8x34
1 x	Pipa BULL MØ1 2.600mm
1 x	Set transmisions BULL Mo1 (dura/aluminium)
1 x	EXTRA NG 74" yello/blue/red (Skywing RC)
1 x	15 mm gas motor standoff
2 x	Adaptadores carga 6s JST-XH
2 x	Locking cable tie 3.2x142 (uds)
1 x	Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x	Adapter 3,0 mm M5 for spinner 30 mm fixed propeller
1 x	3 mm Short Prop Adapter M5
1 x	Adapter 3,0 mm M6
1 x	Charger SKY RC e680
1 x	Charger ISDT 608AC 200W
1 x	Tube support Ø 6mm (10 pcs)
1 x	Support Filtro FESTO
1 x	Support conector MPX (6 pcs)
1 x	Support Pitot JETI
1 x	Support ECU Xicoy X-45
1 x	Angle support XT60 conector
1 x	Support Flush MPX Conector (6 pcs)
2 x	Adapter 5,0 mm M6 for spinner 40 mm fixed propeller
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Threaded coupler M3 (10 uds)
1 x	Adapter 5,0 mm M8
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	2 mm Prop Adapter M5
1 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
2 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Adapter 3,2 mm M6 for spinner 40 mm fixed propeller
1 x	Adapter 4,0 mm M8
2 x	Adapter 3,2 mm M8
2 x	Threaded coupler M2 (10 uds)
1 x	Adapter 3,2 mm M5 for spinner 30 mm fixed propeller
1 x	Adapter 3,0 mm M6 for spinner 40 mm fixed propeller
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	3 mm Long Prop Adapter M5
1 x	Couple M4 for wire (10 pcs)
1 x	Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x	Adapter 3,2 mm M6
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
2 x	Adapter 4,0 mm M6
1 x	AX-60 starters (5 pcs)
1 x	Tank BULL MØ1 (3.2 L) + 1x (0.9 L) + 1x (0.9L Smoke) PRO
1 x	Tank BULL MØ1 3L+14L Smoke (CMJets)
1 x	Electric Landing Gear GS-200 BULL Mo1 2.6 (Elektron Retracts)
1 x	6 mm Quick clamp_S (10 pcs)
1 x	USB Interface REVOLECTRIX for CellPRO 10s
1 x	Oratex Natural White 20m
1 x	Oratex Yellow Cub 10 m
1 x	Oracover GREY Seafire Sea 2m
1 x	Oratex Antik 2m
1 x	M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x	M2,5 5Diam metal ball link V3 (2 pcs)
1 x	Connectors banna oro 2 mm (M/F)
1 x	Soporte grifo FESTO (2 pcs)
1 x	AXI 2814/10 V2 Long
1 x	AXI 2814/6D V2
1 x	AXI 2820/14 V2
1 x	AXI 4120/18 V2
1 x	Long pinned hinge (6 uds)
1 x	Spinner Alumin. propeller pleg. 40 mm / 3,0 mm
1 x	Spinner propeller pleg. 40 mm / 4,0 mm
1 x	Spinner propeller pleg. 40 mm / 3,2 mm
1 x	Micro flex hinge (12 uds)
1 x	Spinner white 40 mm
1 x	Small flex hinge (12 uds)
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	Spinner propeller pleg. 30mm axle 3,0 mm
1 x	Spinner propeller pleg. 40 mm / 5,0 mm
1 x	Circlik for shaft 3.2 mm (10 pcs)
1 x	Spinner propeller pleg. 40 mm / 3,2 mm
1 x	Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs)
1 x	Cable grommet 9.5 mm (4 uds)
1 x	Wheel cover holder Ø 3 mm (2 uds)
1 x	Pin to cable coupler M1,6 ⌀ (6 pcs)
1 x	Flat washer 1.7 mm (20 pcs)
1 x	Split pin 1x8 mm (10 uds)
1 x	Pinion 09 - 2 mm
1 x	Landing gear clamp for Ø 2 mm (4 uds)
1 x	Landing gear strap small (4 uds)
1 x	Landing gear axle Ø 5 mm (2 uds)
1 x	AXI 2808/16 V2 Long
1 x	2020 motor power ring
1 x	AXI 2826/8 V2 Long
1 x	AXI 2814/20 V2 Long
1 x	AXI 2826/12 V2 Long
1 x	AXI 2814/16 V2 Long
1 x	Adpater for mounting VMKG gearbox in 480 motor
1 x	AXI 2820/12 CYCLONE
1 x	Spinner propeller pleg. 40 mm / 3,0 mm
1 x	Circlik for shaft 2.3 mm (10 pcs)
1 x	Spinner Alumin. propeller pleg. 30 mm / 3,2 mm
1 x	Spinner Alumin. fixed propeller 30 mm / 2,3 mm
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	Spinner Alumin. propeller pleg. 30 mm / 2,3 mm
1 x	Medium pin type hinge (12 uds)
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	Steering arm 16 mm Ø 4 mm
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Pin 3,0 to cable coupler M3,0 ⌀ (6 pcs)
1 x	Spring pin Ø 1 x 6 mm (10 pcs)
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	Snap for floding prop for 2 mm axi
1 x	Small kwik link (10 pcs)
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	Spring lock washer 2.1 mm (20 pcs)
2 x	Lock washer 2.7 mm (20 pcs)
1 x	Lock washer 3.2 mm (20 pcs)
1 x	Cable grommet Ø 5 mm (4 uds)
1 x	Wheel cover holder Ø 4 mm (2 uds)
1 x	Lock nut M6 (10 pcs)
1 x	M2 5Diam short black ball link V2 (2 pcs)
1 x	M2 5Diam black ball link V2 (2 pcs)
1 x	Lock washer 2.2 mm (20 pcs)
1 x	Landing gear strap large (4 uds)
1 x	Long ball link M3 (6 uds)
1 x	M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x	Lock nut M5 (20 pcs)
1 x	Landing gear clamp for Ø 3 mm (4 uds)

6,833.38EUR