2 x | Round Rod 6,0x1000 mm |
4 x | Strip ABS 2.0x10.0x1000 mm |
5 x | ABS Strip 1.5x6.0x1000 mm |
4 x | Strip 3,5x1,75x330 mm |
3 x | Round Rod 5,0x1000 mm |
6 x | ABS Strip 1.5x2.0x1000 mm |
3 x | Round Rod 1,5x1000 mm |
3 x | Round Rod 2,5x1000 mm |
3 x | ABS Strip 1.5x4.0x1000 mm |
4 x | ABS Strip 1.0x4.0x1000 mm |
3 x | ABS Strip 1.5x8.0x1000 mm |
4 x | ABS Strip 1.0x3.0x1000 mm |
3 x | Protective Cover for wires Ø 6 mm 1000 mm |
2 x | Gates hinge aluminium (1 pcs) |
4 x | Black silicone 1,0 qmm wire (50 m) |
5 x | Catalog AERO-NAUT 2016 |
2 x | Extinguisher CO2 - 2 Kg |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
3 x | Round Rod 1,25x1000 mm |
2 x | Gear for D 54 |
1 x | Silicone black 0,75 qmm cable ( 1 m) |
2 x | Anodized aluminium servo M4x5/8 screw (4 lilac pcs) |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
3 x | Brass control horn M4 long for wire (4 pcs) |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
2 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
2 x | 250 mm / 16 mm Airbrakes |
2 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | Ventral support for AX-18/AX-60 |
1 x | Anchor 50 mm (2 uds) |
2 x | Servo arm with 6 mm hole to FEMA 9800A |
1 x | Motor DLE 40 cc Twin |
1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
1 x | 1/6 Pilot "Buddy" |
2 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Connectors banna oro 2 mm (M/F) |
3 x | Extension silicon 30 cm female (Futaba) |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | BALSA trip 10x10x1000 mm |
2 x | Aluminium cap bolt washer M3 black (8 pcs) |
3 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs) |
1 x | Windsock Ozone L - 700 mm |
1 x | Oracover Green10 m |
2 x | Glases Nimbus |
1 x | 2 mm female connector (2 pcs) with safety connector |
1 x | Propeller balancer |
1 x | Gold antispark 5,5 mm plug |
2 x | Servo NARO Max Std |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | Hitec 30 mm servo rounded arm |
1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
3 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
1 x | Canopy Latch |
1 x | Carbon fiber rod 3.0 mm x 1000 mm |
1 x | Small aluminium horn blue (2pcs) |
1 x | Piloto Jet "Green" 1/6 Scale |
2 x | Strip 2,0x2,0x330 mm |
3 x | 500 ml sealer (DOPE) |
1 x | SERVO DES 707 BB MG |
1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
1 x | Cable coupler M3 (10 uds) |
2 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
1 x | Ply-Span 450x600/13g Orange |
1 x | Servo MKS HV1220 |
2 x | L-Connector 4.0 mm x 1000 mm |
2 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | Connectors banna oro 0,8 mm (M/F) |
2 x | U Profile ABS 3,0x6,0x1000 mm |
2 x | Electric spoiler 250 mm (2 pcs) |
1 x | Futaba 20 mm servo arm |
1 x | Yellow smoke canister 140 g |
1 x | Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T, |
1 x | Banna gold connector 2,5 mm (M/F) |
2 x | Medidor ángulos y/o incidencias |
4 x | Servo HITEC D941 TW |
1 x | Futaba S3010 Servo - Standard BB 0.16s/6.5kg |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Cable coupler M3 (10 uds) |
1 x | Race Outboard MERCURY type A |
1 x | TrainerCord (master-learner) |
2 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
1 x | Z type of cable coupler Ø 1 (2 uds) |
3 x | ABS "T" angle 10.0x10.0x1000 mm |
3 x | Servo KST X08 Plus 9g HV servo |
2 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
2 x | Adapter rotula M3 |
2 x | 15 mm reinforced hinge |
2 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | Silicone red 0,5 qmm wire ( 1 m) |
3 x | Rigid coupling brass Ø 3.0 / 2.3 mm L: 20 mm |
2 x | MPX-Dean "T" Adapter |
1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
2 x | 1000 ml sealer (DOPE) |
2 x | Regulador NAVY 540R |
2 x | Aramid 50 daN 50 m |
1 x | Rigid coupling brass Ø 4 mm L: 25 mm |
2 x | 800TVL CMOS camera for FPV |
1 x | Parachute BACKUP X100 |
1 x | ABS angle 10,0x10,0x1000 mm |
1 x | Socket head ball link M3 (2 uds) |
2 x | Soporte metal para servos |
2 x | U Profile ABS 1,0x2,0x1000 mm |
2 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al |
1 x | 1/12 Pilot "Cougar" |
3 x | Horn 6/35 with M3 Bearing |
2 x | Futaba 30 mm servo arm with M3 ball link |
1 x | 25 mm Sandpaper file |
2 x | ABS angle 2,0x2,0x1000 mm |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 10 m |
2 x | Servo HITEC HS-485 HB |
1 x | Kwik link with arm M3xM2xL24 |
1 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
2 x | ABS tube 12.0x10.0x1000 mm |
1 x | CC 01 |
4 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Rudder tandem for two Futaba servos |
1 x | Hovercraft sailcloth |
1 x | Birch plywood plate 600x300x3.0 mm |
2 x | Extension silicon 100 cm (Graupner) |
1 x | Truck-trailer for gliders 720 x 239 mm |
1 x | "M" set |
1 x | White smoke bombs AX-3 (10 pcs) |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
2 x | Profile ABS Square 4 x 1000 mm |
3 x | Servo KST X08H V5.0 HV DIGITAL Wing servo 8mm |
3 x | Futaba BLS152 - Upper Case |
1 x | Gates hinge black 30x16 mm (2 pcs) |
3 x | HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | ABS tube 5.0x4.0x1000 mm |
1 x | Civilian pilot "Curt" size 9cm (Slimline) |
1 x | BALSA trip 6.0x6.0x1000 mm |
2 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Hinge 4x14 mm (20 pcs) |
2 x | Stainless steel cable Ø 1.3 mm (10 m) |
2 x | Spray adhesive INFUTAC (Clear) 500 ml |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | Covered closure or fairings |
1 x | Monokote ROJO misil (1.8x0.65m) |
4 x | Servo HITEC HS-325 BB |
1 x | Xplorer4 anemometro |
1 x | Small pinned hinge (6 uds) |
1 x | PIX Hawk with accesories |
1 x | SlowFlyer control horn (3 pcs) |
3 x | Strip ABS 2.0x8.0x1000 mm |
2 x | Quicklock washer 4 mm (10 pcs) |
1 x | Protective Cover for wires Ø 3 mm 1000 mm |
1 x | Sensor Ignition RCEXL Universal |
1 x | Anodized aluminium M4x0,7x20 mm screw (4 blue pcs) |
2 x | Rigid coupling brass Ø 2 mm L: 15 mm |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
1 x | Connectors banna gold 5,5 mm (M/F) |
1 x | Gold antispark 4 mm plug |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | Servo FUTABA BLS172 SV |
2 x | Tape GFK 38 mm |
1 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | SE Ring HACKER 300 mm (2 pcs) |
1 x | Futaba BLS255/272/471SV - Gear Set |
3 x | Extension silicon 75 cm (Graupner) |
2 x | 290 mm M5 Prop shaft |
2 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | Paramotor BackPack XXS (without accessories) |
1 x | Blue metalic ball link M2/2 azul (2 pcs) |
2 x | ABS Strip 1.5x3.0x1000 mm |
3 x | Horn 5/10 with M2 Bearing |
2 x | Spannlack 1000 ml |
2 x | ABS tube 16.0x14.0x1000 mm |
2 x | Horn 20x28,5 mm (2 pcs) |
2 x | 20 g tin paste |
2 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Motor RACE 20 Navy 12v |
1 x | Pilot "Dick" Legends Series (Slimline) |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | PVC 0,08 qmm Futaba servos wire (5 m) |
1 x | LUCAS pilot ARTF |
1 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | Digital scale up to 40 kg |
1 x | A/C quality beech plywood 600x300x5.0 mm |
2 x | Strip ABS 2.0x5.0x1000 mm |
1 x | Allen wheel collar M3x3 |
1 x | Fibra de vidrio 80 g/m² (5 m x 100 cm) |
1 x | Red aluminium servo arm V2-Futaba 1,75" inch M3 |
2 x | ABS angle 6,0x6,0x1000 mm |
2 x | Cockpit aluminium closing |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
2 x | Servo inverter |
4 x | Tow hook for tug |
3 x | ABS Strip 1.0x2.0x1000 mm |
2 x | Servo Dymond D 37 Eco |
3 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Motor XPOWER F2919/10 F5J Light |
2 x | ABS I Strip 10x5x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | Servo FUTABA BLS173 SV |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | ABS angle 3,0x3,0x1000 mm |
2 x | Small Crow DLE-170M |
2 x | Hitec 38 mm servo arm with ball link |
2 x | SE Ring 330 mm (4 pcs) |
2 x | Soporte servo KST X08/H and Plus |
1 x | Tape GFK 50 mm |
1 x | Blue Aluminium double servo arm V3-Hitec 3-3,5inch |
1 x | BEC 3A FOXY |
1 x | Servo FUTABA S 3072 HV S-Bus |
1 x | Servo SAVOX SA-1256 TG |
2 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | Hobbylite Filler, Balsa colour |
2 x | Anodized aluminium servo M4x5/8 screw (4 silver pcs) |
2 x | Paramotor Kit Camo H1.5/ Ben Red |
1 x | XH female balance (2S) connector (2 pcs) |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
2 x | Extension silicon 30 cm male (Graupner) |
2 x | 5 line servos wire black (1 m) |
2 x | Servo HS-5070 MH Hi Volt |
2 x | Connector CAN 15 |
4 x | Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | L-Connector 1.5 mm x 1000 mm |
1 x | Connectors banna oro 3 mm (M/F) |
2 x | Extension silicon 50 cm (Futaba) |
1 x | Optotronix Aurora Plug |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | 18 mm reinforced hinge |
1 x | M3 Maxi ball link (2 uds) |
3 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | Double conector with JR adapter and 200 mm extension |
1 x | 45 mm rods set for direction control |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | Servo FUTABA BLS 276SV |
2 x | Control horn long w/ball |
1 x | 50x45 mm micro-mini servo cover |
1 x | Horn F3A de Titanium 16 mm (2 units) |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
2 x | Red aluminium servo arm V3-Futaba 1,0inch |
3 x | M3 black washers (4 pcs) |
3 x | ABS Strip 1.0x5.0x1000 mm |
3 x | 6 mm M3 variable inclined horn |
1 x | Servo SAVOX SV-1260 MG |
1 x | Circlick securite |
1 x | Vacuum bag, 1200 mm x 50 m |
1 x | Ball link M2,5 (10 pcs) |
1 x | Green smoke canister 65 g |
1 x | M2,5 Diam metal short ball link V3 (2 pcs) |
3 x | ABS tube 2.0x1.0x1000 mm |
2 x | Extension silicon 25 cm (Futaba) |
1 x | Futaba 38 mm servo arm with ball link |
1 x | Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm |
1 x | Oracover Brown 2 m |
3 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Silicone black 0,75 qmm wire ( 25 m) |
1 x | Ball link Aluminio M3 (2 pcs) |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Rudder 2_Tray 3~3.5 inch |
1 x | Aqua RACE 70 (without motor) |
1 x | SAVOX SH 0254 servo |
1 x | Handle for PERMAGRIT lime |
1 x | Fresa corte diamante Ø 2.35mm (lentil) |
1 x | Servo FUTABA S 3071 HV S-Bus |
1 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Ancla 16 mm (2 pcs) |
1 x | Para-RC Mix |
1 x | Blue aluminium servo arm V2-Hitec 1,75" inch M3 |
1 x | White smoke bombs AX-60 (5 pcs) |
1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | 261 mm M4/M4 6.0x4.0 mm shaft ship |
1 x | Fresa corte diamante Ø 2.7mm (bola) |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | Spare Shaft Ø6mm L:450mm M5 |
1 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | Profile ABS half cane 2.5x1000 mm |
1 x | XT-60 connector (female) |
1 x | Alu servo arm double RHINO |
3 x | ABS tube 3.0x1.0x1000 mm |
2 x | Horn 5/20 with M2 Bearing |
2 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | Servo TT ACE SHV 1504 MG |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | Servo RHINO pro SHV digi 4 |
1 x | Cabel "Y" 30 cm (graupner) |
2 x | Strip 1,5x1,5x330 mm |
1 x | Blind nut M3 (4 pcs) |
1 x | Red aluminium servo arm V1-Futaba 15 mm iM2 |
1 x | Dremel PERMAGRIT thin lime |
2 x | L-Connector 1.0 mm x 1000 mm |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Futaba 25 mm servo arm with M3 ball link |
2 x | Extension silicon 100 cm (Futaba) |
1 x | Glases Ace |
1 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
2 x | Spikes Band (5 m) |
2 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | Black silicone 0,25 mm² wire (25 m) |
1 x | Silicon black 2,5 qmm cable ( 25 m) |
1 x | Fresa corte diamante Ø 2.3mm (bola) |
1 x | White smoke canister 65 g |
1 x | Red silicone 1,0 qmm wire (50 m) |
1 x | Servos security connector (2 pcs) |
1 x | Opale Rucksack |
1 x | Cable coupler M2 (10 uds) |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | Extension silicon 30 cm male (Futaba) |
2 x | Quicklock washer 2.5 mm (10 pcs) |
1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
1 x | ALU servo arm 3 mm shaft |
2 x | Quicklock washer 3.5 mm (10 pcs) |
1 x | Red smoke bombs AX-60 (5 pcs) |
1 x | Servo HITEC HS-5625 MG Digi |
1 x | Servo TOPMODEL STANDARD S3217 |
1 x | Monokote BLUE metalizado (1.8x0.65m) |
1 x | Hot Glue Stick RED |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
1 x | Anchor of tow Met. 60 mm |
2 x | ABS tube 20.0x18.0x1000 mm |
1 x | Starter EM Gear Power 250 |
2 x | Spray EC Red 400ml |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Pine wood slat 1.5x3.0x1000 mm |
2 x | Ventus 1:4 set of instruments |
2 x | Cable grommet Ø 4 mm (4 uds) |
1 x | 1/6 Pilot "Garry" |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
1 x | Oracover Azul Cielo 2 m |
2 x | PVC 0,14 qmm servo wire Futaba (5 m) |
1 x | Indoor hinge with servo arm integraded |
1 x | Initior Receiver FRX2 Wireless |
1 x | Jeti Black cap |
2 x | Big-Malibu XL Roof box with surfboard rack GREY |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
2 x | Rigid coupling brass Ø 3 mm L: 20 mm |
1 x | Ancla Admiralsanker 60 mm (2pcs) |
1 x | Joint for loading boom 2 pairs, 10 x 5 mm |
1 x | 140 mm rods set for direction control |
3 x | 90 mm rods + T patellas set for direction control |
1 x | Vacuum pump 12 CFM |
4 x | Extractor piñones 2.3/3.2 mm |
1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
1 x | Micro clevis 0.8 mm(10 uds) |
1 x | A/C quality beech plywood 600x300x0.8 mm |
2 x | Horn DUBRO 1/2A |
1 x | Carbon fiber flat 1000x3.0x0.5 mm |
2 x | Antena FUTABA receptor Standard 2.4 GHz ( 200 mm aprox.) |
2 x | Ancla Admiralsanker 70 mm (2pcs) |
1 x | Futaba SBS-02A Air Pressure Telemetry Sensor (FASSTest/T-FHSS) |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
2 x | Horn 16,5x20 mm (2 pcs) |
3 x | Fabric scissors curved Premium, 16 cm / 6" length |
1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
2 x | Round Rod 2,0x1000 mm |
1 x | Strip ABS 2.0x3.0x1000 mm |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
2 x | ABS tube 18.0x16.0x1000 mm |
1 x | Para-RC Trike "RC-Bullix" |
2 x | Universal Colour Paste deep black 250 g |
1 x | Concave-Convex sandpaper file 13 mm |
3 x | Extension 100 cm (Futaba) |
1 x | Futaba 52 mm servo arm |
2 x | Blue aluminium servo arm V2-Hitec 2,0 inch M3 |
1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
2 x | Futaba Female 40 cm extension |
1 x | Futaba 38 mm servo arm |
3 x | Flap hinge (6 pcs) |
3 x | Horn 6/27 with M3 Bearing |
1 x | LiPo TopFuel ECO-X 3000 mAh 2s 20C MTAG |
1 x | 6 mm hexagonal ball link M3 (10 pcs) |
2 x | Glases Moritz |
2 x | 12 mm floating pad (49 pcs) |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | Smoke set "M" |
2 x | Servo HITEC HS-225 BB |
2 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Pilot "Duke" Legends Series (Slimline) |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | BOX-Setup Actro-marine |
2 x | Slave-cable USB Easy Sim |
2 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Profile ABS Square 2 x 1000 mm |
1 x | Short ball link M2 (6 uds) |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Motor DLE 170 M- Paramotors |
2 x | Presto SF Light Filler styrene-free (420 g) |
1 x | Initior Transmitter FTX2 Wireless |
1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
1 x | Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm |
2 x | Glases Nimbus "Black" |
1 x | Servo safety connector (10 pcs) |
2 x | Circlik for shaft 1.9 mm (10 pcs) |
2 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | DPS Switch JR/JR |
1 x | Ancla 35 x 22 mm (2 pcs) |
1 x | B4-0 rocket charges (6 pcs) |
1 x | Ply-Span 450x600/13g Yellow |
1 x | ORACOVER Ferrari red (2 m) |
2 x | Propeller RABOESCH M4 40 mm (3 Blades) (Right hydropropeller) |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | Coupling bush 5 - 5 mm |
1 x | FunCup XL RR |
1 x | Futaba 25 mm servo arm with ball link |
2 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Connectors DEANS (T) |
3 x | Flat washer 2.2 mm (20 pcs) |
2 x | Ancla Hist. 67 mm (2 uds) |
1 x | Micro clevis (10 uds) |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
2 x | Silicone red 0,5 qmm wire ( 25 m) |
3 x | Plasti Dip Liquid Tape 429 ml black |
1 x | Extra-long adjustable aluminium control horn 2,8x34 |
1 x | Cockpit metalic closing |
3 x | Horn 13,5x16 mm (2 pcs) |
1 x | Servo HITEC HS-635HB Carbonite |
1 x | Servo arms set HS-60/81/85/5082MG/5085mg |
2 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Servoholder Dymond DS 1800 MG Digital (2 pcs) |
2 x | SE Ring 450 mm (2 pcs) |
2 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
2 x | Futaba 17 mm servo arm with ball link HITEC |
1 x | Red aluminium servo arm V1-Futaba 23 mm M2 |
2 x | Silent-blocks DLE 170M |
1 x | Tube Pitot to PIXHAWK |
1 x | 6 mm M3 variable horn |
1 x | 100 mm rods set for direction control |
1 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | Servo FUTABA BLS175 SV |
2 x | aluminium servo arm V2-JR 2,0 inch M3 |
3 x | Gear for MICRO BB |
2 x | Rudder 107-06 |
1 x | 1/12 Pilot "Langley" |
1 x | Joint with bearing M2 22x5,5 |
2 x | USB HLS prog. interface |
1 x | SAVOX SH 1250 MG servo digi |
1 x | White silicone 0,25 mm² wire (25 m) |
1 x | Ball Link Plier |
2 x | Brass control horn M2 large for wire (2pcs) |
1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
2 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Connectors banna oro 4 mm (M/F) |
2 x | ABS tube 14.0x10.0x1000 mm |
2 x | Ring 320 mm length (5 pcs) |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | M2,5 5Diam short black ball link V2 (2 pcs) |
2 x | ABS tube 7.0x5.0x1000 mm |
1 x | Pipa 3D BULL MØ1 2.600mm |
3 x | 20 mm carbon horn |
1 x | Stickers-digit for marking |
1 x | 1/6 Pilot "Cindy" |
2 x | M3-M4 rubber washer (8 pcs) |
2 x | Servo DITEX TD2612S |
1 x | M4xM2,5xL30 nylon clevis and arm (10 uds) |
3 x | Servo HITEC HS-55 |
1 x | Remolcador "Jonny Hafenschlepper" |
2 x | Piloto Jet "Red" 1/6 Scale |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Futaba 2x20 mm servo double arm |
2 x | Squared carbon wing joinner 5x5x220 mm |
1 x | Clip fixing for wing (2 pcs) |
2 x | 89 mm double servo arm with bearing (2 pcs) |
4 x | 6 mm red aluminium threaded horn with patella |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 20 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
2 x | Flat Connector 4.0 mm x 1000 mm |
1 x | Short adjustable control horn 3x24 |
1 x | Horn with ball 40x30 |
1 x | Protective Cover for wires Ø 6 mm 1000 mm |
2 x | MG cannon 1.8 cm (5 pcs) |
1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
1 x | Round Rod 1,0x1000 mm |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | Protective Cover for wires Ø 20 mm 1000 mm |
2 x | Screw-lock connector M2 (2 uds) |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | Bocina Ms 18 mm (3 pcs) |
1 x | 46 mm Futaba servo arm tandem with ball link |
2 x | AX-60 starters (5 pcs) |
1 x | Hot Glue Stick GREEN |
1 x | Blind nut M6 (4 pcs) |
1 x | 25 mm carbon servo arm |
2 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | ABS tube 7.0x6.0x1000 mm |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
2 x | Tube bender |
1 x | Servo holder for retract |
1 x | Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6 |
1 x | Crimping tool |
2 x | T-Connector 4.0 mm x 1000 mm |
1 x | 290x4 mm M4 shaft ship |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | Long pinned hinge (12 uds) |
1 x | Oracover White 2 m |
1 x | Small pinned hinge (12 uds) |
1 x | PowerBox iGyro SRS + GPS Modul |
1 x | Metal gear set for HS81MG/5082MG |
1 x | 1 m servo "Premium" wire (white/red/blue) |
2 x | Brass control horn M2 short for wire (2 pcs) |
1 x | 1/12 Pilot "Tom" |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | SE Ring 400 mm (2 pcs) |
3 x | Rigid coupling brass Ø 4.0 / 3.2 mm L: 25 mm |
2 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
3 x | Optical RPM Sensor |
1 x | M2 5Diam short black ball link V2 (2 pcs) |
1 x | Ball link V1 Ø7 M4/3 (6 uds) |
3 x | Spray adhesive AEROFIX 2 |
2 x | Extension silicon 50 cm (Graupner) |
1 x | Ball link M3 (10 pcs, flat ball) |
3 x | Cable with accesories |
1 x | Xplorer2 anemometro |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
2 x | Silicone black 0,5 qmm wire ( 1 m) |
1 x | Servo HITEC HS-645 MG |
2 x | Servo HITEC HS-5125 MG Slim Metal Gear Wing Servo |
1 x | aluminium servo arm V1-JR 1,0 inch M2 |
1 x | Straightened threaded rod M3 - 1m |
1 x | ABS tube 5.0x4.0x156 mm |
2 x | Extra long horn 60x30 |
1 x | Regulador Actro-Marine 60A |
4 x | Parachute expulsion foam |
2 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | 1/6 Pilot "John" |
1 x | Red aluminium servo arm V1-Futaba 17 mm M2 |
2 x | DYNAMOMETER S-1580 |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | 57 mm micro-mini servo cover |
2 x | Tirpiz Battleship 1:200 |
1 x | U Profile ABS 2,0x4,0x1000 mm |
2 x | Rigid coupling brass Ø 4.0 / 2.3 mm L: 20 mm |
2 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | NoNa BB wheel Ø150x45mm in pair |
2 x | SPS 70V 100/200 A |
2 x | Aluminium cap bolt washer M4 blue (8 pcs) |
2 x | Universal Colour Paste white 50 g |
1 x | ABS 500 x 400 x 0,5 mm (white) |
2 x | PARTALL® Hi-Temp Wax, 340 g |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
2 x | ABS angle 4,0x4,0x1000 mm |
1 x | Digital weight, angle and balance meter BASIC |
1 x | Yellow smoke canister 65 g |
1 x | Parachutist |
1 x | Mixers smoke bombs AX-60 (5 pcs) |
1 x | 1/10 Pilot "Jack" |
1 x | PowerBox MagSensor black connector SRS/Champion |
1 x | Red aluminium servo arm V3-Futaba 3,5inch |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
2 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | Blue metalic ball link M3/3 azul (2 pcs) |
1 x | Servo SAVOX SV-1270 TG |
2 x | ABS tube 9.0x8.0x1000 mm |
1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
1 x | Horn with ball 55x40 |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | Black large kwik link (10 pcs) |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Oracover Yellow CADMIO 2 m |
3 x | Towing hook <3m |
1 x | Silicone 0,35 qmm servos wire Futaba (100 m) |
1 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | APM2.6 Power module with 5.3V DC BEC |
4 x | Servo MKS HV6130 |
1 x | 5 mm M2 variable inclined horn |
1 x | Extra long Prop Bolt for ZG 45/62/74/80, with M5 threaded hole |
1 x | Servo SAVOX SA-128S SG |
1 x | Ball link M2 (10 pcs) |
1 x | Pilot "Anthony" (Slimline) |
1 x | Long ball link M3 (6 uds) |
1 x | Silicon red 1,0 qmm cable ( 25 m) |
3 x | Prolongador S-Bus JR/JR 20cm |
2 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | Yellow smoke canister 100 g |
1 x | ABS tube 3.0x2.0x330 mm |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 2m |
2 x | Carbon fiber rod 20 mmx1000 mm |
3 x | Servo HITEC HS-5585MH |
1 x | Savox Brushless Servo SB-2271SG |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
2 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
2 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | Savox Brushless Servo SC-1251 MG |
1 x | Servos wing assembly set HS 80/81/82/85 |
3 x | Horn 5/15 with M2 Bearing |
1 x | HITEC 20 mm servo arm with ball link |
1 x | Hitec 25 mm servo arm with M3 ball link |
1 x | Vacuum pump P1-N |
1 x | 11 mm Rubber pads (14 pcs) |
2 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | MYLAR film A350 (1000x500 mm) |
1 x | Conector Servo female 4 pines |
1 x | Hitec 25 mm servo arm with ball link |
1 x | White smoke bombs AX-18 (5 pcs) |
1 x | Connectors DEANS 4 pins (1 pair) |
2 x | Aluminium cap bolt washer M4 green (8 pcs) |
2 x | Aluminium M2x12 mm screw (4 pcs) |
1 x | HITEC 17 mm servo arm with ball link HITEC |
1 x | Propeller RABOESCH M4 45 mm (3 Blades pr) (Right hydropropeller) |
1 x | 4 LiPo XH>EH adapter |
1 x | Oracover White 10 m |
1 x | Futaba 30 mm servo rounded arm |
1 x | Oracover Red 2 m |
1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
1 x | Long ball link M1.6 (6 uds) |
2 x | Hinges 7x12 mm (20 pcs) |
1 x | 5 mm M2 variable horn |
1 x | Stainless steel silencer for DA 85/170 |
1 x | 13 mm wing servo holder |
2 x | Servo JETI DSHV 3D13T (13 Kg) |
1 x | Antenna 50 mm (2 uds) |
1 x | Profile ABS half cane 2.0x1000 mm |
1 x | A/C quality beech plywood 600x300x1.5 mm |
1 x | Carbon plate 550x350x1.5 mm ECOTECH |
2 x | Plasti Dip Liquid Tape 429 ml black |
1 x | Anchor 25 mm (2 uds) |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | SAVOX SH 0255 MG servo |
1 x | 28x5 mm wires output (2 pcs) |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
2 x | Allen wheel collar M4x4 |
2 x | Cap Hispano Aviación |
2 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
1 x | Gates hinge |
1 x | HOPPER tank INTAIRCO iTrap 50 175 ml 3x racor 6mm CLASSIC PRO |
2 x | 20x200 mm battery rings |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
2 x | 290 mm M4 7/8x212 mm shaft ship |
1 x | ORACOVER Fluor red (2 m) |
1 x | Threaded coupler M2 (10 uds) |
1 x | PCI-HV ignition conversion set with Zenoah rubber plug cap for Z |
1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
1 x | Ancla metal 40 mm (2 uds) |
1 x | Blue smoke canister 100 g |
1 x | SSPS105 Super Hi-Power servo |
2 x | L-shaped servo mount |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | Green silicone 0,25 mm² wire (25 m) |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
2 x | 30 cm DEANS female connector |
2 x | Stick coupler Ms 15 mm |
2 x | Blue aluminium servo arm V1-Hitec 20 mm M2 |
1 x | Hitec 52 mm servo arm |
1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
3 x | Brass control horn M4 short for wire (4 pcs) |
2 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | Para-RC "RC-Evo-Cross" Rescue |
2 x | Servo Digital HITEC HS-5065 MG |
2 x | Glases Aspen |
3 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | 55% silver electrodes (2 pcs) |
2 x | Anchor 80 mm (2 uds) |
1 x | Servo MKS HBL599 SL |
1 x | Futaba 46 mm servo arm with ball link |
1 x | Servo SAVOX SV-1261 MG |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
2 x | Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs) |
2 x | Red aluminium servo arm V3-Futaba 3-3,5inch |
1 x | TopFuel LiPo 20C-ECO-X 5000mAh 2S MTAG |
2 x | Servo TOPMODEL DS1413 T |
4 x | Propeller RABOESCH M5 130 mm (4 Blades) (Left hydropropeller) |
1 x | White silicone 0,25 qmm wire (150 m) |
1 x | Allen wheel collar M4x6 |
2 x | Green smoke canister 140 g |
3 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
1 x | Wing OXY 5,0 m2 |
1 x | Gold aluminium servo arm V1-JR 1,25" inch M3 |
1 x | Dremel PERMAGRIT 18 mm round lime |
2 x | Blue aluminium servo arm V2-Hitec 1,0 inch M3 |
1 x | Pine wood slat 10x10x1000 mm |
1 x | Connector Sub-D 2+5 Male |
1 x | 3 LiPo XH>EH adapter |
1 x | Propeller balancer |
1 x | Surface Indicator Gauge Small |
1 x | Silicone 0,50 qmm servos wire Graupner(5 m) |
1 x | 1/4 Pilot "Mike" |
1 x | Smoke set "Glider" |
2 x | Alfileres de cobre 0,7 x 7 mm, aprox.50 g |
1 x | Blind nut M5 (4 pcs) |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
2 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
2 x | HITEC DPC-11 programmer |
1 x | HOPPER tank INTAIRCO iTrap 40 95 ml 3x racor 6mm CLASSIC PRO |
1 x | ABS tube 8.0x6.0x1000 mm |
1 x | Red aluminium servo arm V1-Futaba 20 mm M2 |
3 x | Ball link M3 (10 pcs) |
1 x | Parachute PV6 for F3J |
2 x | Lock washer 2.7 mm (20 pcs) |
1 x | ORACOVER transparent Yellow (10 m) |
2 x | Parachute P4 |
2 x | Brass rod Ø 0.5 mm x 1000 mm |
3 x | HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Connector Sub-D 2+5 Female |
2 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Rudder 2_Tray 3.5~4 inch |
1 x | 7 Servo SET 9g DS MG + Full servo extension cable set for Avanti |
1 x | Robbe Modellsport ROOKIE 35 ESC FOR BRUSH MO TORS |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | Ply-Span 450x600/13g Red |
3 x | Horn 6/20 with M3 Bearing |
1 x | Threaded coupler M3 (10 uds) |
1 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
1 x | U Profile ABS 5,0x10,0x1000 mm |
1 x | 1/4 Pilot "Heidi" |
1 x | Windsock Ozone L -1200 mm |
3 x | Fixed launching hook |
1 x | |
1 x | Sealing Iron Sleeve STD |
2 x | Strip 2,5x1,25x330 mm |
1 x | Silicone red 0,25 mm² wire (25 m) |
1 x | Green smoke canister 100 g |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | M3 Maxi ball link (2 uds) |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
1 x | Blue aluminium servo arm V2-Hitec 1,25 inch M3 |
1 x | Anodized aluminium servo M4x5/8 screw (4 red pcs) |
1 x | Painting GHT Lexan Black 150 ml |
1 x | Red aluminium servo arm V3-Futaba 1,25inch M3 |
1 x | 4 mm M3 red control terminal (4 pcs) |
1 x | 2,0x50 mm allen screwdriver |
2 x | Cable control set |
1 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | One touch canopy lock |
2 x | Servo arms set HS-65HB/MG/5065MG |
1 x | Servo HS-5565MH High Voltage |
1 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | 270 mm 3/3 mm shaft ship |
1 x | Carbon fiber rod 12 mm x 1000 mm |
2 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs) |
1 x | Couple M4 for wire (10 pcs) |
1 x | Servo FUTABA S 9670 SV |
2 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
3 x | Cinta Goldfix 1m |
2 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | ABS angle 1.5x1.5x1000 mm |
1 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
2 x | Circlik for shaft 2.3 mm (10 pcs) |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | M3 Maxi ball link (2 uds) |
1 x | Plastic caps for AIR BURTS (30 pcs) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
2 x | ABS tube 4.0x2.0x1000 mm |
1 x | M2 5Diam black ball link V2 (2 pcs) |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | Blue smoke canister 140 g |
1 x | Cable tie mounts 4.3 (4 uds) |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
2 x | Railing 5x100 mm |
2 x | Servo HITEC HS-5245 MG Digi |
2 x | Towing hook |
2 x | SCHARNHORST accessories |
1 x | XH male balance (2S) connector (2 pcs) |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
1 x | M2,5 Diam metal ball link V3 (2 pcs) |
1 x | ABS tube 6.0x4.0x1000 mm |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
1 x | Monokote BLANCO jet (1.8x0.65m) |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Servo HITEC HS-5645 MG Digi |
2 x | Adjustable brass horn threaded M3 |
1 x | BALSA triangular 10x10x1000 mm |
1 x | 75 mm |
3 x | Quicklock washer 1 mm (10 pcs) |
1 x | EasyFLY Addon |
2 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
2 x | 40 mm servo arm with bearing (2 pcs) |
2 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
1 x | Liferaft 47 mm |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Fibra vidrio 25g 110 cm/ 10m (Interglass 02034, finish FE800 pl |
1 x | 20x1000 mm Ring Strap Back To Back |
3 x | Servo HITEC D951 TW |
1 x | 45 mm rods + T patellas set for direction control |
2 x | Carbon fiber rod 4.0 mmx1000 mm |
1 x | Servo SAVOX SB-2290 SG |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Silicone red 0,75 qmm wire ( 25 m) |
1 x | Motor A2212/13T |
1 x | Pin hinge 39x20 mm (10 uds) |
1 x | Electric rocket starters (6 pcs) |
1 x | Blind nut M8 (10 pcs) |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | Futaba Female 40 cm extension |
1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
1 x | Motor DLE 85 cc |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell |
1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
1 x | Fresa corte diamante Ø 2.35mm (flame) |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
2 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | 1/12 Pilot "Fighter" |
1 x | Futaba male 40 cm extension |
2 x | Oratex Natural White 2m |
1 x | Z-shaped servo mount |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | White smoke canister 140 g |
3 x | Servo DITEX EL0510M |
1 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm) |
1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
1 x | Servo SAVOX SA-1258 TG |
2 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | Round Rod 4,0x1000 mm |
1 x | Digital precision scale up to 2000 g |
2 x | SERVO DES 806 Pignons |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | Angle of incidence meter |
1 x | |
2 x | Ferrita con funda |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | 6 mm aluminium horn with patella |
2 x | Futaba 54 mm servo arm with ball link |
1 x | Blind nut M2 (10 pcs) |
2 x | Circlik for shaft 1.2 mm (10 pcs) |
2 x | Extension silicon 75 cm (Futaba) |
1 x | Ply-Span 450x600/13g Blue |
1 x | Pilot "Adolf" Legends Series (Slimline) |
1 x | XH male balance (3S) connector (2 pcs) |
1 x | Green silicone 0,25 qmm wire (50 m) |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | PS-050 TONEGAWA Servo |
2 x | 3l Smoke oil |
1 x | SAVOX SH 0254 servo |
4 x | Spring lock washer 3.1 mm (20 pcs) |
2 x | Servo HITEC HS-5805 MG Digi |
1 x | Blue aluminium servo arm V3-Hitec 1,0inch M3 |
3 x | Blue aluminium double servo arm V3-Hitec 3,5inch |
1 x | Mounting base Ms 8 mm |
1 x | Pilot Lotsenboot |
2 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | Papel japones 12 grs/m2 760x510 mm JAPICO |
1 x | 90x75 mm standart servo cover |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Z Bender - S Type Tool |
1 x | 25 mm reinforced hinge |
3 x | Servo HITEC D950 TW |
1 x | Silicone black 0,5 qmm wire ( 25 m) |
1 x | Softshell Hispano Aviación |
1 x | Blue aluminium servo arm V2-Hitec 1,5 inch M3 |
1 x | 6 mm Quick clamp_S (10 pcs) |
1 x | M3/5 Diam metal short ball link V3 (2 pcs) |
1 x | Glases Flitemaster |
2 x | SE Ring 350 mm (2 pcs) |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | BALSA triangular 8x8x1000 mm |
1 x | Ancla Met. 16 mm (5 pcs) |
2 x | Servo HITEC HS-5084 MG |
1 x | Red aluminium servo arm V2-Futaba 1,25" inch M3 |
1 x | Servo HITEC HS-45 HB, servo box |
3 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
2 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
2 x | Prolongador S-Bus JR/JR 10cm |
1 x | Profile ABS Square 1 x 1000 mm |
1 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
1 x | ABS 500 x 400 x 1 mm (white) |
1 x | Servo Mount M (blue) |
1 x | Blind nut M4 (4 pcs) |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Ply-Span 450x600/13g Black |
1 x | CC 02 |
2 x | Anodized aluminium servo M4x5/8 screw (4 blue pcs) |
1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
1 x | ABS tube 8.0x7.0x1000 mm |
1 x | Horn mando small (2 pcs) |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
1 x | Red smoke canister 140 g |
1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | U Profile ABS 8,0x4,0x1000 mm |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
2 x | Servo HITEC HS-5485 HB Digi |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | Ball link M3 (6 uds) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Bocina 30 mm (1 pcs) |
1 x | Cable coupler M2 (10 uds) |
1 x | Oracover Verde 2 m |
2 x | Extension silicon 30 cm female (Graupner) |
1 x | ABS rectangular profile 12x6.0x1000 mm |
2 x | 100 mm rods + T patellas set for direction control |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | TP/TopFuel - XH 2/3S Adapter |
1 x | EC-Cutter |
2 x | UBEC 6A KAVAN |
2 x | Cockpit plastic closing |
1 x | Rigid coupling brass Ø 5.0 / 4.0 mm L: 25 mm |
1 x | Cabel "Y" 30 cm (Futaba) |
3 x | Gear for D 200 BX |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
3 x | Adjustable launching hook |
1 x | DIVA cabin cruiser |
1 x | PCARD Wireless System |
2 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | CC 03 |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
2 x | Partall paste 650 g |
1 x | Rudder 2_Tray 4~4.5 inch |
1 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
2 x | Aluminium wide washer M3 blue (4 pcs) |
3 x | Spring lock washer 2.1 mm (20 pcs) |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
2 x | Vest clothes Hispano Aviación |
1 x | 22 mm Cut Disc Proxxon/Dremmel |
2 x | La Capitania di Venetia accesories |
2 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
3 x | Horn for flap control (1 pcs) |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Wood anchor 30 mm (2 uds) |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | White smoke canister 100 g |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Round Rod 3,0x1000 mm |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | 290 mm M4/M4 6.0x4.0 mm shaft ship |
1 x | Rescue 1,8m2 / BackPack |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | ARAMID honeycomb 1300x2600x2 mm |
3 x | Flat washer 1.7 mm (20 pcs) |
2 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Fast attachment for servos (25 pcs) |
1 x | SERVO S9177SV HV S-Bus2 Programable |
1 x | Horns set HS-65HB/MG, 5065MG |
1 x | Micro flex hinge (12 uds) |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Oracover Black 2 m |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
1 x | Cable Cargador FUTABA |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
1 x | Cable set PREMIUM, fuselage/wing |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | Oracover Azul 2 m |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
1 x | 80 mm rods set for direction control |
1 x | Oratex White 2m |
1 x | Silicone 0,35 qmm servos wire Graupner(100 m) |
1 x | "L" servo arm 65x49 mm (2 pcs) |
2 x | Motor DLE 200cc Premium Muffler |
2 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | FUTABA 20 mm servo arm with ball link |
1 x | Heat Seal Iron |
1 x | Wing OXY 0,5 pulgadas2 |
1 x | Vertical mounting servo holder |
3 x | SIMtransmitter 6 Mode 2 |
2 x | ABS tube 10.0x8.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | 5 LiPo XH>EH adapter |
3 x | Extension silicon 35 cm male (Futaba) |
1 x | Buy Perforated film 145 cm / 50 m |
2 x | Copier 2x20 cm pcs |
1 x | La Capitania di Venetia 1:50 |
2 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
4 x | Servo MKS HV 777A+ |
2 x | SE Ring 200 mm (2 pcs) |
1 x | ABS I Strip 20x10x1000 mm |
1 x | Blue aluminium servo arm V1-Hitec 1,0" inch M2 |
2 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | AX-60 starters (5 pcs) |
1 x | BALSA triangular 6x6x1000 mm |
1 x | XT-60 connector (male) |
1 x | Clip mini fixing for wing (2 pcs) |
1 x | Paint gun for sprays |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Me-163 |
2 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
1 x | Servo arms set 40/50/55/5055 MG |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | Pin hinge 26x11 mm (10 uds) |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 675g |
1 x | Paramotor BackPack XXS 2 |
1 x | Short ball link M3 (6 uds) |
1 x | BALSA triangular 15x15x1000 mm |
1 x | Angled clevis with threaded rod M3 |
1 x | Paramotor Trike XL |
1 x | Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm) |
3 x | Horn mando long (2 pcs) |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
2 x | 17 mm servo arm with ball link DES Graupner |
2 x | Servo HITEC HS-311 |
2 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Propeller RABOESCH M4 45 mm (3 Blades pr) (Left hydropropeller) |
1 x | DPSI Ampere battery backer |
1 x | SAVOX SH 1290 MG servo digi |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | Angle measurer |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
3 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Ferrita 17x10x6.5 mm |
1 x | Connectors banna oro 8,0 mm (M/F) |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | ABS tube 3.0x2.0x1000 mm |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Futaba 14/20 mm servo pull-pull double arm with ball link |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Protective Cover for wires Ø 10 mm 1000 mm |
1 x | Red aluminium servo arm V2-Futaba 1,0" inch M3 |
1 x | Hitec 38 mm servo arm |
2 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
1 x | Universal Filter |
2 x | Flat washer 2.7 mm (20 uds)pcs) |
1 x | MAULE M-7-420 2.8m Red |
3 x | Red aluminium servo arm V2-Futaba 1,5" inch M3 |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Cable set PREMIUM , fuselage/wing one4one |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Propeller RABOESCH M4 40 mm (3 Blades) (Left hydropropeller) |
1 x | SPARK Switch 7.4v |
1 x | M2,5 5Diam black ball link V2 (2 pcs) |
1 x | Metal gear set for HS85MG/5085MG |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | SC NAVY V15R |
1 x | Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs |
3 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
2 x | Servo HITEC HS-125 MG |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | Railing L250 mm (10 pcs) |
1 x | Gold aluminium servo arm V2-JR 1,25" inch M3 |
1 x | Buy Perforated film 100 cm / 50 m |
2 x | SERVO DES 806 Pignons |
1 x | Anchor 25 mm (2 uds) |
1 x | Ancla 40 x 24 mm (2 pcs) |
1 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | JETImodel Addcap 1640 |
1 x | Black spiral protective cover for wires Ø 0,5/50 mm - 25 m |
1 x | Servo inverter |
1 x | Electric Fuel Pump 12V |
2 x | Mudguard wheels 112/127 mm |
1 x | JM electric Pump |
2 x | FEMA DEFLECTOR LEVER FOR WHEEL BRAKE, |
1 x | Servo Tester |
2 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b |
2 x | Set montaje amortiguador para modelos 8-16 Kg |
2 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m |
1 x | KAVAN Hand crank fuel pump |
1 x | Electric Fuel Pump 12v |
2 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
1 x | PowerBox Smokepump JETs 2x outside |
2 x | Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel) |
1 x | Variable Flow Smoke Pump System |
1 x | Smoke pump RCEXL |
2 x | Axle wheel with accesories |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
1 x | Servo MKS HBL550 |
1 x | Spray Graphit 33 |
5 x | Servo HITEC D-955 TW Titanium |
1 x | Propeller APC 11x6 Glow/Gas |
2 x | Gear set HITEC HS205/225MG/5245MG/7245MH |
2 x | Servo HITEC HS-45 HB |
1 x | BALSA trip 3.0x5.0x1000 mm |
3 x | Brazo servo aluminio HITEC HS-125MG/5125MG |
1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m) |
2 x | Propeller APC 16x8 Glow/Gas |
1 x | Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm) |
1 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm) |
1 x | Servo MKS HBL380 |
1 x | Servo HITEC HS-5475 HB Digi |
1 x | Fiberglass tube 6/4x1000mm |
1 x | Motor DLE 430 cc - Paramotors |
4 x | Servo MKS 6100 DS |
1 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm) |
2 x | Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm) |
2 x | Propeller APC 8x4 Glow/Gas |
1 x | Pine wood slat 5.0x5.0x1000 mm |
2 x | Servo HITEC HS-225 MG |
1 x | Brazo servo MKS X8 Metal L:1.25/1.5 inc |
3 x | Propeller APC 12x8 Glow/Gas |
1 x | Gear set HITEC HS-56 HB |
2 x | Propeller APC 11x5 Glow/Gas |
1 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm) |
2 x | Liston HAYA 8 x 8 x 1000 mm |
3 x | Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
2 x | Servo HITEC D145 SW |
2 x | Servo HITEC D131 MW nano |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm) |
1 x | Servo HITEC HS-5087 MH |
1 x | CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm) |
2 x | Servo HITEC D954 TW |
1 x | |
1 x | Gear set HITEC HS-81 |
1 x | Screws set for Hitec MG arms servo |
1 x | Servo HITEC HS-5085 MG Digi |
1 x | Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm |
1 x | Servo MKS HV6120H |
2 x | Release wax 250ml |
2 x | Nitroverdu 500 ml |
1 x | Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm) |
1 x | Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm) |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm) |
1 x | Gear set HITEC HS-645MG/5645MG/5685MH |
2 x | Propeller APC 9x6 Glow/Gas |
1 x | Universal Colour Paste deep black 50 g |
1 x | Servo HITEC D645 MW |
1 x | Servo HITEC HS-53 |
2 x | Propeller APC 10x7 Glow/Gas |
2 x | Solvent Plasti Dip 1000 ml |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
1 x | Plasti Dip Liquid Tape 429 ml orange |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm) |
1 x | Servo HITEC D625 MW |
2 x | Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm) |
1 x | Gear set HITEC HS-311/322/325BB |
3 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Propeller APC 14x6 Glow/Gas |
2 x | Propeller FALCON 32,5x11 PUSHER Carbono |
1 x | Gear set HITEC HS-55 |
1 x | Servo case HS-225MG/225BB/5245MG |
2 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm) |
1 x | Glases Innovation Plus |
1 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
1 x | Threaded insert M5 (10 pcs) |
1 x | 10 mm Quick clamp_L (6 pcs) |
3 x | Spring pin Ø 1 x 6 mm (10 pcs) |
2 x | Screw M3x20 (10 pcs) |
1 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Socket Head Screw M2x5 |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 3 cell |
1 x | Fiberglass heat shield Ø 8 mm 1000 mm |
1 x | Silicone black 2,5 qmm wire ( 1 m) |
2 x | Socket Head Screw M2,5x12 |
1 x | Silicone red 0,75 qmm wire ( 1 m) |
1 x | Spring pin Ø 2 x 6 mm (10 pcs) |
1 x | Xoar Electric Beechwood Prop 21x10 |
1 x | Screw M3x5 (10 pcs) |
2 x | Socket Screw M2x3 mm (4 pcs) |
1 x | Titanium M3x0,5x12 mm Flat Head screw (4 pcs) |
1 x | Titanium M3x0,5x6 mm Flat Head screw (4 pcs) |
1 x | Silicone black 1,0 qmm wire ( 1 m) |
2 x | Spring lock washer 4.1 mm (20 pcs) |
1 x | Servo MKS 6100 DS |
1 x | Tapping Screw M2.2x13 (10 pcs) |
1 x | Tapping Screw M2.2x9.5 (10 pcs) |
1 x | Silicone red 4,0 qmm wire ( 1 m) |
2 x | Treaded hexagonal socket insert M4 Br (4 pcs) |
1 x | Xoar Electric Beechwood Prop 20x10 |
2 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 2 cell |
2 x | Servo M2x9/16 screw (4 pcs) |
1 x | Xoar Electric Beechwood Prop 15x8 |
1 x | Socket Head Screw M2x10 |
1 x | Servo KST DS125MG servo ala 10mm 28g 7Kg |
1 x | Brazo servo aluminio KST 25T-5V2,3515,325,125,135,145X10,X12,A13 |
1 x | Fiberglass heat shield Ø 6 mm 1000 mm |
1 x | Screw M4x12 (10 pcs) |
1 x | Screw M4x30 (10 pcs) |
2 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø6.1 m) |
1 x | Tapping Screw M2.9x9.5 (10 pcs) |
1 x | Soporte servo KST X10 mini / DS135MG |
1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
2 x | Cable S.BUS 3 salidas 300 mm |
1 x | 300x4 mm M4 shaft ship |
1 x | 2,3 mm Prop Adapter M6 |
2 x | Premium servo extension 100cm |
1 x | 12 mm mast holder |
1 x | 11x7 tree blades propeller |
1 x | PSC 6 |
1 x | 25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller) |
1 x | SBEC 40 |
1 x | MAX BEC 2 |
1 x | SPS Remote switch actuator |
1 x | 29,0 mm propeller (left propeller) |
1 x | SBEC Jeti |
1 x | SWTU2 switch |
2 x | Prolonguer for Balancer Thunder Power 6S |
1 x | 15x7 tree blades propeller LEFT |
1 x | 25 mm fenders (10 pcs) |
1 x | 28 mm turnbuckle |
1 x | 25,0 mm 3-BL M4 hydro-propeller (left hydropropeller) |
3 x | Extension lead 15 cm Multiplex |
1 x | Extension 30 cm (Futaba) |
1 x | 14 mm Portholes for screws (10 pcs) |
1 x | Multi-adapter balancer JST/C - TP |
1 x | Cabel "Y" 15 cm |
2 x | 3.2 mm Prop Adapter M6 |
1 x | MAX BEC |
1 x | MAX BEC 2D plus EX |
1 x | Cable S.BUS 3 salidas 100 mm |
1 x | Pins M connect Multipin connectors AWG 20-24 |
2 x | DA 85 / DA 100 / DA 100 L carburetor |
1 x | Extension Arm for Carburetor |
2 x | 200 mm extensión servo HITEC/JR |
1 x | Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one |
1 x | Extension PVC 150 cm (Graupner) |
2 x | Suction funnel for carburetor 90D-M (red) |
1 x | Silicone black 4,0 qmm wire (25 m) |
1 x | Adapter 3,0 mm M8 |
1 x | Silicone black 6,0 qmm wire (25 m) |
1 x | Walbro carburetor for MVVS 26/30/35/40 cc |
1 x | Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
1 x | Silicone red 1,5 qmm wire ( 25 m) |
1 x | Silicone black 6,0 qmm wire ( 1 m) |
1 x | AXI 2204 Multicopter |
2 x | Circlick securite |
1 x | Silicone red 6,0 qmm wire (25 m) |
1 x | Silicone red 1,5 qmm wire ( 1 m) |
2 x | Locking cable tie 2.5x100 (uds) |
1 x | Adapter 3,2 mm M5 for spinner 30 mm fixed propeller |
1 x | Silicone black 1,5 qmm wire ( 1 m) |
1 x | 1804 2400KV Brushless Motor Qav 250 mini |
2 x | Premium servo extension 25cm |
1 x | Silicone red 1,0 qmm wire ( 1 m) |
1 x | Cleat 20 mm (2 pcs) |
1 x | Doppelpoller 7 mm plastic (10 uds) |
1 x | Spray YELLOW Inca Lexan 150ml |
2 x | Servo KST HS08A Wing Servo - 5.2Kg.cm 0.11s 11.0g 8mm |
1 x | 38 mm fenders (10 pcs) |
1 x | Eje barco 450x4 mm M4 |
1 x | Clamping slide 14mm (10 pcs) plastic |
1 x | 3 mm Leader (L 100 mm) |
1 x | Servo KST X20-7512 V8.0 82kg 8.4v |
1 x | Escalera gris 12x60 mm |
1 x | Davit Ms 35 mm (1 par) |
1 x | Servo KST X15-1208 V8.0 13.5Kg HV |
1 x | Propeller MEJZLIK 9,5x3 SF Carbon Indoor |
1 x | SE Ring 300 mm (2 pcs) |
1 x | PropCover 16-20" (1 pcs) |
3 x | Servo HBS 690BB HV Digital |
1 x | SERVO DES 707 BB MG, Pignons |
1 x | |
1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
2 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
1 x | LOWER TOW HOOK |
3 x | Marker ties (20 pcs) |
1 x | Foil for sticking flaps and ailerons |
3 x | SERVO HOLDER |
1 x | Propeller MEJZLIK 20x10 Electric light (36 g) |
1 x | SERVO DES 658 BB MG |
3 x | SE Ring 240 mm (2 pcs) |
2 x | Nose OPTIMA 2.200 mm (Elec or Glider) |
3 x | Aero-Master Fuselage (Aero-naut) |
2 x | Legs + electric brakes for Viper Jet 90 |
1 x | SU 29S 140 carbon landing gear |
3 x | Aero-Master (Aero-naut) |
1 x | Fascination 3600 mm, Spare Elevator (Top Model) |
1 x | Indoor landing gear set |
3 x | FANTASY ARF 3.0m, Fundas alas |
2 x | DELPHIN Race 3.6m c64 |
3 x | Aero-Master Wings (Aero-naut) |
3 x | Fascination 3600 mm, Spare Wings (Top Model) |
3 x | Flip ARF (Top Model) |
2 x | Astra wing Joinner (Top Model) |
4 x | EASYGLIDER 4 RR |
2 x | ENIGMA ARF |
1 x | BIG MOSNTER |
3 x | Albatros ,spare fuselage (Top Model) |
2 x | Avia spare fouselage CF reinforced (Top Model) |
3 x | Albatros red/white (Top Model) |
2 x | ASG 32 560 mm |
2 x | ALBATROS 3.0 m (orange/white) |
2 x | FOX 3000 mm ARF (FMS) |
1 x | Servo HITEC HS-56 BB |
1 x | UHU Por 50ml/40g |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | BLANIK 50 V2 Silver/Blue (SebArt), cabina |
2 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | Styrene plate 320x120x0.5 mm |
1 x | Crystal TX 35.010 Ch 61 |
1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
1 x | Crystal TX 35.150 Ch 75 |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Male connector for 20 pines AWG |
1 x | Screws flush mount M2 |
1 x | Battery RX JETI LiIon RB 6200 7.2v |
2 x | Baering 3x8x4 |
1 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
1 x | Birch plywood plate 600x300x2.0 mm |
2 x | Big Crow DLE-170M |
1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
1 x | Pulley brass 10/2 (2 pcs) |
1 x | 20x15 Falcon electric V2 |
1 x | Socket head long ball link M3 (6 uds) |
1 x | MPX Sub-D Adaptor |
1 x | PIN Connector female (100 pcs) |
1 x | Propeller MENZ-S 18x8 3-Blades |
1 x | XH male balance (8S) connector (2 pcs) |
1 x | Servo HITEC HS-82 MG |
1 x | Long adjustable aluminium control horn 2,8x24 |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link |
2 x | 6 mm blue aluminium threaded horn with patella |
1 x | Komet Pump |
1 x | Carbon fiber rod 2.0 mmx1000 mm |
1 x | T-Hose connector 3-3-3 mm |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | "S" set for planes |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Cabel charger transmitter GRAUPNER |
1 x | Brass control horn M2 long for wire (10pcs) |
1 x | Servo HITEC HS-7955 TG Coreless Digi |
1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
4 x | Propeller APC 15x8 Glow/Gas |
1 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm) |
1 x | Ball Link Plier |
1 x | G-Ring Ø3mm Ø3xØ6x3 mm |
2 x | Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR) |
1 x | Profile ABS half cane 3x1000 mm |
1 x | Barandilla Ms 10x250 mm (2 pcs) |
1 x | Fishing boat Jule Fischkutter |
1 x | Servo lock HS-80/81/82/85 (2 pcs) |
1 x | 2,5x60 mm allen screwdriver |
1 x | Field folding model stand SebArt |
1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | Silicone 0,50 qmm servos wire Graupner(100 m) |
1 x | 11 mm wing servo holder |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
2 x | Quicklock washer 1.5 mm (10 pcs) |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | 15 mm floating pad (30 pcs) |
1 x | Servo SAVOX SV-1273 TG |
1 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | SE Ring 250 mm (2 pcs) |
2 x | 54 mm Futaba servo arm tandem with ball link |
1 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
1 x | Futaba 3010 - Gear Set |
2 x | Lock washer 4.3 mm (20 pcs) |
1 x | Profile ABS Square 3 x 1000 mm |
1 x | Jet Afterburner Simulator NF-Jet2YY Set |
2 x | LA500 Autogyro |
1 x | 2 piece mounting frame |
1 x | Jet Afterburner Simulator NF-Jet3 RYS |
1 x | BlueCom™ Adapter (Android / WP) |
1 x | 30 cm MULTIPLEX female connector |
4 x | LA500 housing-lower cyclic |
1 x | Conector JR Servo male (50 pcs) |
1 x | 6 mm ball link M3 (10 pcs) |
1 x | FALCON 33X11W CARBON PROPELLER (GAS) |
2 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | Yellow silicone 0,5 qmm wire (50 m) |
1 x | FALCON 27X11 CARBON PROPELLER (GAS) |
1 x | Silicone adhesive ELASTOSIL® E4, tube/ 90 ml |
2 x | BULL MØ1 2.600mm "ALPINE" |
2 x | Fuselage BULL MØ1 2.600mm |
2 x | MB339 Freece PNP 1790 mm |
2 x | BULL MØ1 2.600mm YELLOW |
1 x | PC-21 2.880 mm SINGAPUR scheme |
1 x | Servo HITEC HS-77 BB Low Profile |
1 x | 5 mm gas motor standoff |
1 x | DLE 85 / DLE111 / DLE120 Prop Washer |
1 x | Pick up DA50/100/150 |
1 x | Piston ring for DLE-20 |
2 x | ZENOAH ZG 62 SL |
2 x | Motor EME 60 cc |
1 x | Air Intake manifold 90° - Large |
1 x | Hub propeller DLE 111 V3/120 |
1 x | 7-Cylinder 35cc 4-Stroke Glow Radial Engine |
1 x | 7 mm gas motor standoff |
1 x | Piston ring for ZG 26SC/EI, ZG 26SCM ZG 26SLH and Zenoah G260RC/ |
1 x | BOSCH spark plug cap for DA 50-R, DA 100 and DA 150 |
2 x | Baffles for Radial Moki S250/330 mm |
1 x | Motor DA 170 |
2 x | Captador RCEXL para DA |
1 x | Propeller hub EME 60cc |
1 x | Dia. 16x35 mm PTFE tube for escape |
1 x | Motor EME 35 cc |
1 x | Selfstarr EME35 |
1 x | ZENOAH ZG 38 SC with Choke Carburettor |
1 x | Carburator Moki S400 |
1 x | Canister combo DLE 120 cc |
1 x | Hub DLE 30 |
1 x | Pitts Mufflers EME 55/60 cc |
1 x | FIALA Propeller 23x8 Electric |
1 x | Cylinder ZG 26SC/SLH |
1 x | 30cm Flexible Stainless Steel Exhaust Tubing D=16mm |
1 x | Screw M4x20 (10 pcs) |
1 x | Motor Moki 180 |
1 x | Carburetor DLE 170M |
2 x | Servo M2x7/16 screw (4 pcs) |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 36 mm |
1 x | Carburetor for ZG45SL and ZG62/S/SL |
1 x | Motor DA 50-R |
2 x | Tapping Screw M2.2x65 (10 pcs) |
1 x | Miniature brass strap hinge, 1 m |
1 x | ABS tube 9.0x7.0x1000 mm |
2 x | Propeller APC 15x6 Glow/Gas |
1 x | |
2 x | Muffler DLE-120 Right |
1 x | Propeller APC 16x6 Glow/Gas |
1 x | 10 mm gas motor standoff |
1 x | ZENOAH ZG 80B |
1 x | 180° TUBE-ANGLE Ø 25 mm |
1 x | Piston ring for DA-150 |
1 x | Blind nut M6 (4 pcs) |
1 x | Carbon fiber rod 0.8 mmx1000 mm |
1 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
2 x | Tape GFK 25 mm |
1 x | Servo KST BLS815 HV V2.0 Servo 20mm 70g 20Kg |
1 x | Anodized aluminium servo M4x5/8 screw (4 black pcs) |
1 x | Servo KST A08H V6.0 3,2Kg HV |
1 x | Ply-Span 450x600/13g White |
1 x | Blue Aluminium lock nut M3 (4 pcs) |
1 x | Actrocon 60A ESC |
1 x | Turbofan 4000 |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm) |
2 x | Gear set HITEC HS-7950TH |
1 x | Hexagonal Nut M1,6 (10 pcs) |
2 x | 160 mm carbon undercarriage (2pcs) |
1 x | Legs + electric brakes for Viper Jet 1700 mm |
1 x | 8Wx2 Navigation & Strobe, 11mm Green/White |
1 x | Boat vents 10mm (2pcs) |
1 x | Servo KST X10 V2.0 ala 10mm 28g 10.8Kg |
3 x | Lock nut M4 (10 pcs) |
2 x | Circlik for shaft 3.2 mm (10 pcs) |
1 x | Frontal support Speed 600 |
1 x | Excentric gearbox for 3,2mm axis (4,1:1) |
1 x | Excentric gearbox for 2,0mm axis (5,0:1) |
1 x | Spinner plastic black fixed propeller 30 mm |
1 x | Magnetic Interruptor MULTIPLEX |
1 x | One Way bearing for EME35 starkit with key |
1 x | Red spinner 40-45 mm |
1 x | Spinner 3BL propeller pleg. 42 mm / 6,0 mm |
1 x | Extension 90 cm (Futaba) |
1 x | Extension silicon 25 cm (Graupner) |
1 x | Excentric gearbox for 3,2mm axis (3,0:1) |
1 x | 40 mm black plastic spinner for fixed propeller |
1 x | Extension 6 lipos XH > EH |
1 x | Extension 15 cm (Futaba) |
2 x | Propeller APC 10x4 Glow/Gas |
1 x | Male Prolonger TP 4/5S |
1 x | Spinner 3BL propeller pleg. 42 mm / 4,0 mm |
1 x | Excentric gearbox BB for motor 600, 3,2mm axis (2,33:1) |
1 x | SBEC 30 D |
1 x | Spinner plastic red propeller pleg. 30 mm / 3,2 |
1 x | Excentric gearbox for 2,3mm axis (4,1:1) |
2 x | Flat washer 3.2 mm (20 pcs) |
1 x | Servo slow down unit (0,7-14,7 sec ) |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | Cockpit latch closing I=10 mm |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Multi-adapter balancer JST - TP |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | Retract Landing gear ER40 Combo Xcalibur complete |
1 x | ER-40eVo Set B [Complet Set + GS200] |
1 x | RB-45 Electronic |
1 x | Retract Landing gear ER40 Combo Custom complete |
1 x | Electric Landing Gear ODYSSEY +GS200 (Elektron Retracts) |
2 x | Pan Head Screw M1,6x6 (10 pcs) |
2 x | Nut for mounting M3 (4 pcs) |
2 x | Nylon Screw M4x20 |
2 x | Nut for mounting M6 (4 pcs) |
2 x | Pan Head Screw M1,6x8 (10 pcs) |
1 x | Nylon Screw M6x40 |
1 x | 50 mm servo arm with bearing (2 pcs) |
1 x | Adaptador USB - YGE |
2 x | Brass control horn M4 short for wire (10pcs) |
2 x | Rudder forward 90x28 "type Kato" |
1 x | 58 mm micro servo cover |
1 x | ER40eVo set B (20 Kg) |
1 x | Brake disc Electron Retracts |
1 x | Allen wheel collar M3x5 |
1 x | Snap long M2 (10 uds) |
1 x | Red aluminium servo arm V3-Futaba 1,5inch M3 |
1 x | 29,0 mm propeller (rigth propeller) |
1 x | ESC ALPHA 60A HV |
1 x | 8Wx2 Navigation & Strobe, 11mm Red/White |
1 x | Propeller AERONAUT M4 50 mm (3 Blades pr) (Left hydropropeller) |
1 x | Propeller AERO-NAUT M4 45 mm (3 Blades pr) (Right hydropropeller |
1 x | Propeller 3BL 35 mm M4 plastic Left |
1 x | Propeller 3BL 30 mm M4 plastic Left |
1 x | Solarfilm Lite blue transp. 5m |
2 x | Oracover Yellow CADMIO 10 m |
1 x | PROFICOVER 5m |
1 x | PVC termo-retract battery 45 mm transparent orange (1 m) |
1 x | Oratex Natural White 20m |
1 x | Oratex Yellow Cub 10 m |
1 x | Oratex Silver 2m |
1 x | PVC yellow transparent battery termo-retract 68 mm (1 m) |
1 x | PVC transparent battery termo-retract 195 mm (1 m) |
1 x | PVC blue transparent battery termo-retract 95 mm (1 m) |
1 x | Blue aluminium double servo arm HITEC 2,5 inch M3 |
1 x | Suction funnel for carburetor WALBRO 20-80cc (red) |
1 x | resin-hardener L-385 H-385 (625 g) |
1 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | Propeller APC 16x12 Electric |
1 x | SE Ring 360 mm (2 pcs) |
1 x | Ø 0,5 mm Pull-Pull Kevlar Line (3 m) |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
1 x | JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT |
1 x | |
2 x | LENTUS Multiplex Landig gear retract |
1 x | 120 mm leg for retract undercarriage with rotation sistem (1 pcs |
2 x | FUNRAY RR |
2 x | Ion Pro, Canopy (JP Model) |
2 x | Challenger ARF (Top Model) |
2 x | ACTIVE ARF Electric 1.995 mm |
2 x | Avia spare blue cockpit (Top Model) |
2 x | FOX 3000 mm, Fuselage (FMS) |
3 x | Navaho new design (Top Model) |
2 x | Fascination 3600 mm (Top Model) |
1 x | Adaptadores carga 6s JST-XH |
2 x | LA500 housing-upper cyclic |
1 x | Blade holder lower |
2 x | LA500 pre-rotation gear hub |
1 x | Blade holder center |
2 x | Rotorhead pushrod |
1 x | TA1200 Charger Compatible with Smart and Standard LiPo Batteries |
2 x | Bags BULL Mo1 2.6m "Luxe" |
1 x | Set transmisions ULTIMATUM 2.0 (dura/aluminium) |
1 x | FALCON 28X10 CARBON PROPELLER (GAS) |
1 x | Wing Joiner ULTIMATUM 2.0 m |
1 x | Set transmisions BULL Mo1 (dura/aluminium) |
1 x | ULTIMATUM 2.0 m Red Bull |
1 x | ULTIMATUM 2.0 PRO "Full Carbon Red" |
1 x | Prop washer for ZG45SL, ZG62/S/SL and ZG74B/ZG80B |
1 x | Saito FG-36 motor support |
1 x | Wheel keeper washer |
2 x | Nut M2 securing |
2 x | Red aluminium servo arm V2-Futaba 2,0 inch |
1 x | Nut M1,6 |
2 x | Head spacer |
1 x | Baal link 4/14/4 (5 pcs) |
1 x | Balls 4 mm |
1 x | Piñon motor rotor LA-500 |
1 x | Ball joint long |
1 x | Raer wall |
2 x | 30/11-26 Zoll, 3-Blade Scale |
2 x | LA500 freewheel bearing |
1 x | Head upper part |
1 x | Screws M1,6x6 Allen |
2 x | Bearing 3x6x2,5 |
1 x | LA500 front gear holder |
1 x | Rudder |
1 x | Long adjustable aluminium control horn with bearing 2,8x15 |
2 x | Side rudder |
1 x | Long adjustable control horn with bearing |
2 x | Long extra-strong control horn with bearing 2,8x34 |
2 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
1 x | Charger GensAce IMARS Dual Channel AC200W/DC300Wx2 |
1 x | Spare Part Frame Set for EACHINE RACER 250 |
1 x | Propeller APC 9x3.8 SF |
1 x | Propeller KAVAN 32x12 2-Bl |
1 x | FALCON 29X9 CARBON PROPELLER (GAS) |
1 x | ULTIMATUM 2.0 m green/black |
1 x | Bags de Luxe ULTIMATUM 2.0 |
1 x | Set Stickers Ultimatum 2.0 - Andy Folienwelt |
1 x | BULL MØ1 2.600mm "RED BULL" |
1 x | FALCON 24X12 CARBON PROPELLER (GAS) |
1 x | Propeller APC 7x4 Electric |
1 x | BULL MØ1 2.600mm GREEN |
1 x | FALCON 24X10 CARBON PROPELLER (GAS) |
1 x | Propeller FALCON 27x10 3-BL carbono-gas |
1 x | FALCON 28X11 CARBON PROPELLER (GAS) |
1 x | Canopy BULL MØ1 2.600mm |
1 x | BULL MØ1 2.600mm "AeroPANDA" |
1 x | Tank ULTIMATUM 2.0 (3.2 L) PRO |
1 x | Servo MKS HV747 |
1 x | Silencer with rear exhaust MTW TDH 110 |
1 x | Silencer kit ZG 45/62 |
1 x | Reed valve for DA-60/70 |
1 x | Stainless Steel Bend D 22x0,5mm |
1 x | Reed valve petal for DA 35/50R/100l carburator |
2 x | Nut for mounting M2 (4 pcs) |
1 x | Screw M2.5x10 (10 pcs) |
1 x | Screw M2x8 (10 pcs) |
1 x | Gasket set DLE-30 |
2 x | Dia. 25x5 mm tefon tube for escape |
2 x | Pick up EME 55/60 cc |
1 x | Kit repair carburator DLE-85/111/120/222 |
1 x | Piñon motor autostarter 35cc |
3 x | Tubo Teflon Ø28 mm x 10cm |
1 x | Stainless Steel S-Bend D25x0,5mm |
1 x | Motor EME 60 cc with electric starter |
1 x | Motor Moki 100 BVT |
1 x | 2,3 mm Prop Adapter M6 |
1 x | 2 mm Prop Adapter M6 |
1 x | 4 mm Prop Adapter M6 |
1 x | 3 mm Prop Adapter M6 |
1 x | 5 mm Prop Adapter CN-Spinner |
1 x | 3,2 mm Prop Adapter M6 |
1 x | Quicklock washer 2 mm (10 pcs) |
1 x | Metal hook for loading arm, 9mm high, 10 pcs |
1 x | Propeller 3BL 50 mm M4 Plastic |
1 x | Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar |
2 x | 2.3 mm Adapter for 30 mm spinners |
1 x | Servo KST BLS825 V8.0 HV 35Kg 8.4v |
1 x | Spring Clip 25 mm teflon tube |
1 x | EME ignition free wheel |
1 x | CDI EME 55/60 cc |
1 x | Piston EME 35cc |
1 x | D.A. Fueling Valve |
1 x | Dia. 15x25 mm tefon tube for escape |
2 x | Pitts Mufflers EME 70 cc (2 pcs) |
1 x | Tygon tube 6.35 - 3.18 mm 1m |
1 x | GASKET SET FOR DLE40 |
1 x | DLE-55RA Ignition unit |
1 x | ZENOAH ZG 26SC with magneto ignition |
1 x | Propeller APC 10x6 Glow/Gas |
1 x | Giant Scale Muffler D.A. 70 (2pcs) |
1 x | Canister combo DLE 120 cc |
1 x | Dia. 20x15 mm teflon tube for escape |
1 x | Motor EME 70 cc with autostarter |
1 x | Motor Moki S 250 cc 5 cyl with autostarter |
1 x | 15 cm PTFE-tubing for 25 mm tubes |
1 x | 90° TUBE-ANGLE Ø 28 mm |
1 x | Escape Moki 100 BVT |
1 x | ZENOAH ZG 26SLH Helicopter Engine |
1 x | MTW TD120K MUFFLER |
1 x | 7.94 x 4.76 mm tygon tube 1 m |
1 x | Motor EME 35 cc with electric starter |
1 x | Piston ring EME 35cc |
1 x | KS86 S-6 muffler up to 65cc |
1 x | Moki Pushrod S250 (1 pcs) |
1 x | Giant Scale Muffler D.A. 150 (2 pcs) |
1 x | Stainless Steel Bend D 12x0,4mm |
1 x | Motor MOKI S 350 cc 7 cylinder |
1 x | Spinner propeller pleg. 30 mm / 3,17 mm |
1 x | ASH 31 Mi Scale:1/3 - 7m |
1 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
1 x | POLARON EX 800w charger |
1 x | Xoar Electric Beechwood Prop 12x6 |
1 x | USB interface ALTIS |
1 x | Focke Wulf FW-190A-8 93", Electric retract Landing gear |
1 x | F4U CORSAIR 93", Electric retract Landing gear |
1 x | Rudder forward 70x28 "type Kato" |
1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
1 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
1 x | Wing bolts M3 Steel screw Red (2 pcs) |
1 x | Cockpit aluminium closing 4.7g |
1 x | Cockpit aluminium closing 5.4g |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
1 x | Gear set HITEC HS-85 |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
1 x | Motor ST 7-160 B |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
1 x | 3 mm Prop Adapter M6 |
1 x | Prop Shaft Adapter 4 mm/M8 "long" 35 mm |
1 x | Dumper propeller 6/8 mm |
1 x | Prop Shaft Adapter 6 mm/M8 "long" 35 mm |
1 x | Prop Shaft Adapter 5 mm/M8 "long" |
1 x | 4 mm Prop Adapter M8 |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | 10 mm Prop Adapter M12 |
1 x | 4 mm Prop Adapter M8 |
1 x | 3.2 mm Prop Adapter M8 |
1 x | Aluminium wide washer M3 red (4 pcs) |
2 x | Aero-Master Cabine (Aero-naut) |
1 x | Flat washer 4.3 mm (20 pcs) |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | Prop Shaft Adapter 5 mm "long" |
1 x | Metal ring front FEMA |
1 x | 5 mm Prop Adapter M8 |
1 x | Set freno para ruedas Dia. 127 mm |
1 x | Spring lock washer 2.6 mm (20 pcs) |
1 x | 3.17 mm Prop Adapter CN-Spinner |
1 x | 4 mm Prop Adapter CN-Spinner |
1 x | Lock washer 3.2 mm (20 pcs) |
1 x | Circlik for shaft 1.5 mm (10 pcs) |
1 x | 6 mm Prop Adapter M8 |
1 x | SCHARNHORST Battleship 1:200 |
1 x | Quicklock washer 3 mm (10 pcs) |
1 x | Prop Shaft Adapter 8 mm/M12 "long" |
1 x | Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor |
1 x | Screws 2,2 x 6,5 mm (20 pcs) |
1 x | Small mill 40x27x13 mm |
1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
1 x | Black smoke bombs AX-60 (5 pcs) |
1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
1 x | Extension silicon 10 cm (Graupner) |
1 x | Rocket cardboard tube 25mm x 24mm x 230mm |
1 x | 30 cm BEC cable (female) |
1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
1 x | FIALA Propeller 18x8 |
1 x | Red smoke canister 100 g |
1 x | FIALA Propeller 18x10 |
1 x | Nut for mounting M5 (4 pcs) |
1 x | Blade Holder (3 blades) |
1 x | Medium extra-strong control horn with bearing 2,8x24 |
1 x | Short extra-strong control horn with bearing 2,8x15 |
1 x | Rudder forward 80x28 "type Kato" |
1 x | Wing bolts M3 Steel screw blue (2 pcs) |
1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
1 x | Propeller RABOESCH M3 50 mm (3 Blades pr) (Left hydropropeller) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
1 x | Window mounting channel 5m |
1 x | Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs) |
1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
1 x | Wing bolts M6 Steel screw Red (2 pcs) |
1 x | Propeller Pleg CAM Carbon 14x6 |
1 x | Suction funnel for carburetor 90D-L (red) |
1 x | SAITO FG-36 carburetor |
1 x | Suction funnel for carburetor WALBRO 20-80cc (blue) |
1 x | Reed valve for DA 50-R |
1 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
1 x | PT 22x10 EL Propeller |
1 x | PT 21x13 EL Propeller |
1 x | V tail SILENT DREAM 2.200 mm (Elec or Glider) |
1 x | Fiberglass landing gear for 140-160 |
3 x | FOX 2.300 mm V2 PNP (FMS) |
3 x | Avia (Top Model) |
2 x | LENTUS Multiplex Fundas alas |
1 x | Ion Pro, Elevator (JP Model) |
1 x | LENTUS Multiplex Propeller 8x6 |
1 x | Screw KB 1.4x6 mm (10 pcs) |
1 x | Washer 2.2×4 |
1 x | Blade holder center GFK 0,5 mm |
1 x | Cierva C30 Elevator |
1 x | LA500 nose |
1 x | BULL MØ1 2.600mm (mono color) |
1 x | Motor mount class 48" |
1 x | Fascination 3600 mm, Canopy (Top Model) |
2 x | Astra (Top Model) |
1 x | THERMIK XXXL 4,9m D-Box Electric |
1 x | Pegasus 2050 mm F4J (Top Model) |
1 x | TAKEO 3.6m electric |
1 x | M3/5Diam metal ball link V3 (2 pcs) |
2 x | Prelude ARF 2500 mm (TopModel) |
1 x | HERON RR |
1 x | Ion Pro, Wing joiner (JP Model) |
2 x | Fascination 3600 mm ARC |
1 x | Prelude ARF 2500 mm, spare wing (TopModel) |
1 x | Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l) |
1 x | 120x60 mm SLH KOVO wheel |
1 x | Stainless steel 4 m Pull-Pull complet set (max 20 kg) |
1 x | BULL MØ1 2.600mm "McLAREN-GULF" |
1 x | Rocket cardboard tube 50mm x 48mm x 250mm |
1 x | Albatros ,spare cockpit (Top Model) |
1 x | IKURA 4.0 m |
1 x | TAKEO 3.6m |
2 x | MYSTIQUE 2.9 m ARF |
1 x | IKURA GPS 4.28 m |
1 x | Fournier RF-4D |
1 x | Ion Pro, Fuselage (JP Model) |
1 x | ORCA C64 Pro V 3.6m |
1 x | Q-12 2000 mm Electric |
2 x | XENON RC (Aero-naut) |
1 x | Siesta T tail (Topmodel) |
1 x | Q-12 X-light 2000 mm Electric |
1 x | Poerfly |
1 x | CYCLONE XT 6.2m ARF |
1 x | FIALA Propeller 26x10 |
1 x | FANTASY ARF 3.2m |
1 x | THERMIK DREAM 3.000 mm (Topmodel) |
1 x | Ion Pro NG electric with flaps RED Fluor (JP Model) |
1 x | Gracia (Top Model) |
1 x | SWEET Electro ARF "CFR fuselage " (Top Model) |
1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
1 x | Blades 330mm |
1 x | LA500 pilot-seat set |
1 x | Autogyro Cierva C30 Spain |
1 x | Rotor Mast |
1 x | Screw M3x16 |
1 x | Battery plate |
|
226,597.79EUR |