1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Bearings for motor HACKER C50
2 x Fiberglass motor-holder for electric motors
1 x Motor Mount for Multiplex FunJet
1 x Motor mount for 1 m models
1 x Cooler motor type 300
3 x Frontal support Speed 400/480
1 x Motor mount M
1 x Central support Speed 280
2 x Motor mount for 1200 mm models
2 x A60 Motor Mount Alu complete set
1 x 
2 x Metalic motor holder for class 550-600
1 x Ø 28 mm fiberglass motor-holder for electric motors
1 x Size "L" motor holder for class 600
1 x Motor holder for AC 28/7
1 x Radial heatsink for MPJ AC25/35-xx motor
3 x Ø 40 mm fiberglass motor-holder for electric motors
2 x Disipador para motor Hacker B 20 (or motors up to Ø20 mm)
1 x Central support Speed 600
1 x Cooler motor type 280
1 x 
1 x Frontal support Speed 600
2 x Cooler motor type 400
1 x Fiberglass motor-holder for electric motors
1 x Size "M" motor holder for class 600
1 x Indoor motor holder
1 x Receiver bed (Blue)
4 x Ø 38 mm fiberglass motor-holder for electric motors
1 x A50 Motor Mount Alu complete set
1 x Cooler motor type 150
2 x Fan for A60
2 x 4 mm Prop Adapter M8
1 x Prop Shaft Adapter 5 mm/M8 "long"
1 x Alfileres de cobre 0,7 x 7 mm, aprox.50 g
1 x ABS angle 2,0x2,0x1000 mm
1 x Initior Receiver FRX2 Wireless
1 x SE Ring 480 mm (2 pcs)
1 x Extension silicon 30 cm male (Graupner)
1 x Spikes Band (5 m)
1 x Cabel "Y" 15 cm
1 x Ventus 1:4 set of instruments
1 x Ball link M3 (10 pcs, flat ball)
1 x Extension silicon 10 cm (Futaba)
1 x Futaba Female 40 cm extension
1 x SE Ring HACKER 300 mm (2 pcs)
1 x 20x200 mm battery rings
1 x Profile ABS half cane 3x1000 mm
1 x ABS Strip 1.5x8.0x1000 mm
1 x Smoke set "S"
1 x Ferrita 17x10x6.5 mm
2 x M2 5Diam black ball link V2 (2 pcs)
1 x "S" set for planes
1 x SIMtransmitter 6 Mode 2
1 x Round Rod 3,0x1000 mm
1 x B4-0 rocket charges (6 pcs)
1 x Parachute expulsion foam
1 x M2/M1/6 3Diam long black ball link V1 (2 pcs)
2 x Truck-trailer for gliders 720 x 285 mm
1 x Rubber profile 8-2 mm 2M
1 x ABS Strip 1.5x6.0x1000 mm
1 x Profile ABS half cane 4x1000 mm
1 x Round Rod 6,0x1000 mm
1 x Wing tips support for AX-18/AX-60 (2 pcs)
1 x M2,5 5Diam short black ball link V2 (2 pcs)
1 x 3l Smoke oil
2 x M2,5 Diam metal short ball link V3 (2 pcs)
1 x AX-60 starters (5 pcs)
1 x ABS rectangular profile 10x5.0x1000 mm
1 x Extension silicon 75 cm (Graupner)
1 x TrainerCord (master-learner)
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x Plasti Dip Liquid Tape 429 ml black
1 x USB Mini Camera endoscope
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x Nitroverdu 500 ml
1 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x Spray EC Red 400ml
1 x Suncover 100cc Red
1 x PARTALL® Hi-Temp Wax, 340 g
1 x CC 01
1 x 20 g tin paste
1 x Spray adhesive INFUTAC (Clear) 500 ml
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x MPX-Dean "T" Adapter
1 x Motor ACTRO 28-3-1300
1 x BOX-Setup Actro-marine
1 x Motor ACTRO 35-4-790
1 x LO 100 ARC 3.3m,cabina
1 x PARTENAVIA 2020 mm ARF with Flaps
1 x DH82 Tiger Moth Scale 1:3.3 Panel Instrum. trasero
2 x SKY RC T400Q Charger 4x100w
1 x Charger SKY RC e680
1 x Charger ISDT 608AC 200W
1 x Charger SKY RC D200 neo
1 x Adaptadores carga 6s JST-XH
1 x SKY RC Temperature Sensor
1 x Socket head ball link M3 (2 uds)
1 x Prop Shaft Adapter 8 mm/M12 "long"
1 x 6 mm Prop Adapter M8
1 x Flat Connector 4.0 mm x 1000 mm
1 x Socket head ball link M3 (2 uds)
1 x Truck-trailer for gliders 720 x 239 mm
1 x WingFix ULTRA Black Edition
1 x Propeller balancer
1 x EXTRA 330 LX 2.34m ARF (LX-09) Pilot
1 x 3 mm Prop Adapter M6
1 x Joint with bearing M3 22x5,5
1 x 3.2 mm Prop Adapter M6
1 x Joint with bearing M2,5 22x5,5
1 x Prop Shaft Adapter 5 mm "long"
1 x Ball link M2 (10 pcs)
1 x ABS "T" angle 2.0x2.0x1000 mm
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Ball link M3 (6 uds)
1 x Long ball link M2 (6 uds)
1 x ABS "T" angle 6.0x6.0x1000 mm
1 x M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x ABS "T" angle 8.0x8.0x1000 mm
1 x Profile ABS triangular 2.0x1000 mm 90º
1 x Profile ABS triangular 4.0x1000 mm 90º
1 x Long ball link M1.6 (6 uds)
1 x 3,2 mm Prop Adapter M8
1 x Socket head long ball link M3 (2 uds)
1 x 3.2 mm Prop Adapter M8
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x M3/5 Diam metal short ball link V3 (2 pcs)
1 x Profile ABS Square 2 x 1000 mm
1 x Short ball link M3 (6 uds)
1 x Rubber profile 6-2 mm 2M
1 x Profile ABS half cane 8.0x1000 mm
1 x SE Ring 350 mm (2 pcs)
1 x M3 Maxi ball link (2 uds)
1 x Profile ABS half cane 7.0x1000 mm
1 x Tape GFK 50 mm
1 x SE Ring 250 mm (2 pcs)
1 x 10 mm Prop Adapter M12
1 x Brake controller for 28 and 36 mm Brakes
1 x Tren de cola carbono 50-70cc
1 x Electronic fog horn
1 x Surface Indicator Gauge Small
1 x Angle measurer
1 x Medidor ángulos y/o incidencias
1 x Propeller balancer
1 x Angle of incidence meter
1 x Field folding model stand SebArt
1 x SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm
1 x Adapter lead MPX/XT60
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x Faucet FESTO
1 x BEC 3A FOXY
1 x Wheel cover holder Ø 4 mm (2 uds)
1 x Y-Hose connector 6-6-6 mm
1 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x Y-Hose connector 2-2-2 mm
1 x Quick hose connector 6-6 mm
1 x Fail Safe air retract
1 x VIPER JET G2 Esq. 2 White/Red
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Y-Hose connector 3-3-3 mm
1 x 30 cm BEC cable (male)
1 x 500 ml sealer (DOPE)
1 x Kit hydraulic brake
1 x Central piece 52 mm - 5º
1 x Spinner 3BL propeller pleg. 36 mm / 4,0 mm
1 x BU 131 Jugmann Panel Instrum. frontal
1 x BU 131 Jugmann ARC
1 x T-Hose connector 4-4-4mm
1 x LS-8 GFK 6m Glider
1 x 15 mm reinforced hinge
1 x Carbon plate 350x150x1.0 mm
1 x LUCAS pilot ARTF
1 x Paramotor BackPack XXS 2
1 x Aramid 50 daN 50 m
1 x Opale Rucksack
1 x Paramotor Trike XL
1 x Wing OXY 5,0 m2
1 x Ballast 700gr OPALE
13,868.94EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies