3 x | 4 blades set |
2 x | 3 blades set |
1 x | Blade Holder Full (4 blades) |
2 x | Tail tube RAINBOW |
1 x | Blade Holder Full (3 blades) |
1 x | Vest clothes Hispano Aviación |
1 x | AC-10 pre-rotacion with motor |
1 x | Yellow smoke canister 140 g |
1 x | Blue smoke canister 140 g |
1 x | PPM Encoder Module |
2 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
2 x | White smoke bombs AX-60 (5 pcs) |
2 x | Socket head long ball link M3 (6 uds) |
1 x | M3 Maxi ball link (2 uds) |
2 x | AX-60 starters (5 pcs) |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
2 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Beech dowels 3.0 x 1000 mm |
2 x | Electric rocket starters (6 pcs) |
1 x | Remote electric ignition system |
1 x | Glases Stratus |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | Carbon plate 350x150x3.0 mm |
1 x | Conector Servo female 4 pines |
1 x | Socket head ball link M3 (2 uds) |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | XH male balance (2S) connector (2 pcs) |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Ball link M2 (10 pcs) |
2 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | Red smoke canister 65 g |
1 x | BALSA triangular 15x15x1000 mm |
1 x | PIX Hawk with accesories |
1 x | Raer wall |
1 x | Rotorshape Autogyro |
1 x | Rotor Mast |
1 x | Rotorshape Elevator |
2 x | Autogyro Cierva C30 Spain |
2 x | LA500 rotor head core |
1 x | Adapter 3,2 mm M6 for spinner 40 mm fixed propeller |
1 x | Adapter 3,2 mm M5 for spinner 30 mm fixed propeller |
1 x | Adapter 3,0 mm M6 |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
1 x | 3l Smoke oil |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | Joint with bearing M2,5 22x5,5 |
1 x | Connectors banna oro 3 mm (M/F) |
1 x | Interface Jack Adapter IKARUS |
1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
1 x | White smoke bombs AX-18 (5 pcs) |
1 x | 2 mm female connector (2 pcs) with safety connector |
1 x | Long ball link M3 (6 uds) |
1 x | Glases Nimbus "Black" |
1 x | MPX Sub-D Adaptor |
1 x | Slave-cable USB Easy Sim |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | EasyFLY Addon |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | B4-0 rocket charges (6 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
2 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
1 x | Glases Ace |
1 x | Short ball link M2 (6 uds) |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | Ball link M2,5 (10 pcs) |
1 x | White smoke bombs AX-3 (10 pcs) |
1 x | Short ball link M1.6 (6 uds) |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | M3 INDUSTRIAL ball link (2 uds) |
1 x | M3 Maxi ball link (2 uds) |
1 x | XH female balance (5S) connector (2 pcs) |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Smoke set "Glider" |
1 x | Grub screw M3x3 shouldered (2 pcs) |
2 x | Washer 2.2×4 |
2 x | LA500 rotor head shaft |
1 x | Xoar Electric Beechwood Prop 21x10 |
1 x | Propeller electric carbon 10.5x8 |
1 x | Propeller electric carbon 8.5x5 |
1 x | Bearing housing |
1 x | Cierva C30 Body Spain |
2 x | Battery plate |
1 x | Propeller electric carbon 10x7 |
1 x | Propeller POWER-PROP 13x9 |
1 x | PT 21x13 EL Propeller |
1 x | PT 22x10 EL Propeller |
1 x | PT 20x13 EL Propeller |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | ABS 500 x 400 x 1 mm (white) |
1 x | Brazo servo KAVAN doble aluminio 25T - 2.5" M3 |
1 x | Red smoke canister 140 g |
1 x | Servo Robbe FS 525 BB MG HV |
1 x | Servo GO-13 MG 13g 2.8 Kg 0.12s/60º |
1 x | Black smoke bombs AX-60 (5 pcs) |
1 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | Servo GO-09 9g |
2 x | LA500 Blades |
1 x | LA500 pre-rotation gear hub |
1 x | Motor wall |
2 x | Blades 330mm |
1 x | Threaded coupler M3 (10 uds) |
2 x | LA500 nose |
1 x | Adapter 3,0 mm M5 for spinner 30 mm fixed propeller |
1 x | Adapter 5,0 mm M6 for spinner 40 mm fixed propeller |
1 x | Spinner Alumin. fixed propeller 30 mm / 2,3 mm |
1 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | Plastic wheels 30 mm (2 pcs) |
1 x | Spinner Alumin. propeller pleg. 30 mm / 3,2 mm |
1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | Pulley brass 6/1,5 (2 pcs) |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Spinner propeller pleg. 40 mm / 3,2 mm |
1 x | Spinner Alumin. fixed propeller 40 mm / 3,0 mm |
1 x | Spring lock washer 2.6 mm (20 pcs) |
1 x | Pulley brass 5/1,5 (2 pcs) |
1 x | Plastic wheels 28 mm (2 pcs) |
1 x | 10 mm dogdrive props |
1 x | Screw M2x6 (10 pcs) |
1 x | Propeller balancer |
1 x | Spinner propeller pleg. 30 mm / 4,0 mm |
1 x | Carbon plate 550x350x3.0 mm ECOTECH |
1 x | Carbon plate 550x350x4.0 mm ECOTECH |
1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
1 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
1 x | Soporte carbono MR30 (2 pcs) |
1 x | Birch plywood plate 600x300x2.5 mm |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | 4 mm Prop Adapter M8 |
1 x | 8Wx2 Navigation & Strobe, 11mm Red/White |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Propeller POWER-PROP 11x9 |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | Film release agent PVA 25 ml |
1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
1 x | Sheet Depron Aero 1250x800x3 mm |
1 x | White smoke canister 140 g |
1 x | Carbon servo arms for HITEC HS 65 (4 pcs) |
1 x | Green smoke canister 65 g |
1 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
1 x | M3/5 Diam metal short ball link V3 (2 pcs) |
1 x | Servo GO-1073MGW 32 kg.cm 0.135s/60º |
1 x | Servo GO-12S70MG 20.5kg.cm 0.06s/60º |
1 x | Aluminium servo arm (2 uds) |
1 x | Servo arms set 40/50/55/5055 MG |
1 x | Servo GO-02 Digital 1.8g |
1 x | Long ball link M1.6 (6 uds) |
1 x | M2,5 Diam metal ball link V3 (2 pcs) |
1 x | Cierva C30 simulated motor |
1 x | Wheel keeper washer |
3 x | LA500 cyclic central part |
1 x | LA500 tail empennage |
1 x | Brass control horn M2 large for wire (2pcs) |
1 x | Spinner Alumin. fixed propeller 40 mm / 4,0 mm |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
1 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | Micro control horn (2 pcs) |
1 x | Hexagonal Nut M4 (10 pcs) |
1 x | Tapping Screw M2.9x9.5 (10 pcs) |
1 x | Pulley brass 4/1,5 (2 pcs) |
1 x | Spinner propeller pleg. 30mm axle 3,0 mm |
1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Lock washer 4.3 mm (20 pcs) |
1 x | Spinner propeller pleg. 40 mm / 4,0 mm |
1 x | Spring lock washer 2.1 mm (20 pcs) |
1 x | Spinner propeller pleg. 40 mm / 3,2 mm |
1 x | Lock washer 2.7 mm (20 pcs) |
1 x | Small control horn with bearing (2 pcs) |
1 x | Hexagonal Nut M3 (10 pcs) |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Spinner Alumin. fixed propeller 30 mm / 3,2 mm |
1 x | Flat washer 3.2 mm (20 pcs) |
1 x | Spinner propeller pleg. 30 mm / 3,2 mm |
1 x | Brass control horn M4 long for wire (4 pcs) |
1 x | Spinner NUT M5 |
1 x | Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm |
1 x | Spinner NUT M10x1 |
1 x | Spinner Alumin. propeller pleg. 30 mm / 2,3 mm |
1 x | Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6 |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | Spinner white 30 mm |
1 x | Banna gold connector 2,5 mm (M/F) |
1 x | Control horn long w/ball |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | Brass control horn M2 long for wire (10pcs) |
1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
1 x | Triple rod con. 3mm Pushrod (2 pcs) |
1 x | |
1 x | Lock washer 3.2 mm (20 pcs) |
1 x | Landing gear axle Ø 4 mm (2 uds) |
1 x | Plastic wheels 36 mm (2 pcs) |
1 x | Spinner propeller pleg. 40 mm / 3,2 mm |
1 x | Spinner propeller pleg. 40 mm / 4,0 mm |
1 x | Split pin 1.6x16 mm (10 uds) |
1 x | Flat washer 2.2 mm (20 pcs) |
1 x | Tapping Screw M2.2x9.5 (10 pcs) |
1 x | Brass control horn M3 short for wire (2 pcs) |
1 x | Micro control horn T2 Ø 1 |
1 x | Spinner Alumin. propeller pleg. 40 mm / 4,0 mm |
1 x | Screw M2x8 (10 pcs) |
1 x | Horn mando small (2 pcs) |
1 x | Spinner white 40 mm |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | Snap long M2 (10 uds) |
1 x | Fiberglass plate 350x150x3.0 mm |
1 x | Fiberglass plate 620x540x1,0 mm |
1 x | PIN Connector female (100 pcs) |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Gear for D 200 BX |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | MPX Support (2 pcs) |
1 x | Prop Shaft Adapter 4 mm/M8 "long" 35 mm |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | 3.2 mm Prop Adapter M8 |
1 x | 5 mm Prop Adapter M6 |
1 x | Protector Connector Dean-T (1 pair) |
1 x | 8Wx2 Navigation & Strobe, 11mm Green/White |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | 3.2 mm Prop Adapter M6 |
1 x | 3,2 mm Prop Adapter M6 |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
2 x | Blade holder center GFK 0,5 mm |
2 x | Blade holder upper |
1 x | LA500 pilot-seat set |
1 x | KingTech K100TP G4+ Turboprop |
1 x | Turbine KINGTECH K100 G4 |
1 x | FOD Screen K140G/K180G/K210G |
1 x | Scale exhaust K45TP |
1 x | Turbina JetsMunt M210TS |
1 x | Turbina JetsMunt VT98 NG |
1 x | Electric starter BEE (old) |
1 x | Ball joint long |
1 x | Balls 4 mm |
1 x | Head core |
1 x | LA500 ciclic lever |
1 x | Bearing 3x6x2,5 |
1 x | Head spacer |
1 x | Cierva C30 Elevator |
1 x | Turbine KingTech K30G Restart |
1 x | Battery LiFe -3000/25C-3S 9.9V |
1 x | GSU Kingtech |
1 x | KingTech Turbineoil 10L |
1 x | Turbine RABBIT 100 SE 11 Kg |
1 x | Turbine RHINO 200 SE 20.4 Kg |
1 x | Turbina KINGTECH K320 G5 |
1 x | Colador RABBIT |
1 x | Power Pack SE Series JETCENTRAL |
1 x | JETCENTRAL ECU LIFE BATTERY 3800 MAH |
1 x | ECU BL180 Jets Munt |
1 x | LA500 Autogyro |
1 x | LA500 housing-lower cyclic |
1 x | LA500 pre-rotation gear |
1 x | Head upper part |
1 x | LA500 freewheel bearing |
1 x | Complet landing gear |
1 x | LA500 front gear holder |
1 x | Head lower part |
1 x | Baering 3x8x4 |
1 x | Head core bushing |
1 x | KingTech T-Modul 5 in 1 Telemetry |
1 x | Connectors banna oro 2 mm (M/F) |
1 x | Turbina KINGTECH K55G4 |
1 x | Telemetry adapter JestMunt |
1 x | Turbina JetsMunt M122 NG |
|
34,531.59EUR |