1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Conector MR-60 (pareja)
1 x EXTRA NG 74" yello/blue/red (Skywing RC)
1 x Adaptadores carga 6s JST-XH
1 x EXTRA NG 74" white/red/blue (Skywing RC)
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Small aluminium horn gold (2pcs)
1 x Brass control horn M2 short for wire (2 pcs)
1 x Horn 6/20 with M3 Bearing
1 x Horn 20x28,5 mm (2 pcs)
2 x Optical RPM Sensor
1 x 6 mm blue aluminium threaded horn with patella
1 x Horn 6/35 with M3 Bearing
2 x 20 mm carbon horn
3 x Threaded coupler ALU M3 Ø 6 (2 uds)
3 x 6 mm aluminium horn with patella
2 x Horn 16,5x20 mm (2 pcs)
1 x LH long black aluminium horn L31xH30 (2pcs)
1 x Cable with accesories
1 x Starter EM Gear Power 80
1 x Z Bender - S Type Tool
1 x Starter 12v (Max 180 and 30ccm)
1 x Ball Link Plier
2 x Crimping tool
1 x Screwdriver for Hexagon 1,5mm
1 x Digital scale up to 40 kg
1 x Vacuum pump P1-N
1 x 
1 x Vacuum Connection VA 1 (for hose Ø 6 mm)
2 x Hot Glue Stick BLACK
1 x PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x Crimping tool
1 x Copier 5x20 cm pcs
1 x Screwdriver for Hexagon 1,27mm
1 x Starter Sullivan-STAR 603 DINATRON
1 x Starter 12v (Max 90 and 15ccm)
1 x Hot Glue Stick RED
1 x Vacuum pump 12 CFM
1 x Z Bender - S Type Tool
1 x PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x 4 LiPo XH>EH adapter
1 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x Cabel charger transmitter GRAUPNER
1 x TrainerCord (master-learner)
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x RF9 Flight Simulator with Spektrum Controller
1 x SIMtransmitter 6 Mode 2
1 x CC 03
2 x APM2.6 Power module with 5.3V DC BEC
1 x 2 LiPo XH>EH adapter
1 x Dean "T" - Futaba Adapter
1 x CC 02
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x CM-3
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x Strip ABS 2.0x3.0x1000 mm
1 x ABS Strip 1.5x6.0x1000 mm
1 x Long pinned hinge (6 uds)
1 x M3 black washers (4 pcs)
1 x M2 5Diam short black ball link V2 (2 pcs)
1 x Fox 4000 mm Airworld,canopy frame
1 x Fox MDM 1 4000 mm DeLuxe,Fox 1:4 set of instruments for the f
1 x Electric spoiler 300 mm (2 pcs)
1 x X-RAY Micro QR (Fuselage with canopy)
1 x Chili F3K 2 wing servo mounted
1 x X-RAY Micro QR (Tail Tube)
1 x Chili Race F3K 2 wing servo mounted(carbon biax)
1 x BABY glider (Aero-naut)
1 x 2,5x60 mm allen screwdriver
1 x 2,0x50 mm allen screwdriver
1 x Screwdriver for Torx® TX8
1 x Turbina KINGTECH K320 G5
1 x Starter EM Gear Power 250
1 x 120x60 mm SLH KOVO wheel
1 x Horn for flap control (1 pcs)
2 x Propeller POWER-PROP 7x7
1 x Schul-Malpinsel Gr.5
1 x Fresa corte diamante Ø 2.3mm (bola)
1 x Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
1 x LH long aluminium horn L31xH30 (2pcs)
1 x Fresa corte diamante Ø 2.35mm (flame)
2 x 
1 x Mini-handed clamp
1 x silicon 100 cm Futaba Extension Ø 0,35 mm
1 x Antonov AN2 Scale 1/6 - 3m
1 x EDGE 540-A 105" (2660 mm)
1 x ANGEL 48" pp red/blue/white
1 x EDGE 540-A 74" (1880 mm)
1 x Ventus 1:4 set of instruments
1 x ANGEL 48" pp orange/black/white
1 x LASER 260 60" V2 ARF Yellow (SkyWing)
1 x Hot Glue Stick GREEN
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x DYNAMOMETER S-1580
1 x Horn with ball 55x40
1 x Handle for PERMAGRIT lime
1 x Small aluminium horn red (2pcs)
1 x Fresa corte diamante Ø 1.0mm (bola)
1 x Horn 13,5x16 mm (2 pcs)
1 x Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs)
1 x Goma arrancador Ø36 mm x 30 mm
1 x Modelling compound (Plastilin), sculptor's quality 1 Kg
2 x XT-60 Plug Mold
1 x MPX 8 pins plug mold
1 x Cut tube
1 x Sealing Iron STANDARD
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x wing/fuselage connector for 3 pines AWG 20-24
1 x CC 01
1 x BABY glider drawings (Aero-naut)
1 x X-RAY Micro QR (Rudder)
1 x E-FUN BUG (ROI-Import)
1 x DINO Glider ARC
1 x Glider PIROL
1 x Glider STROLCH
1 x IMPULSE 2 F3F
1 x servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x Vasa model Catapult
1 x X-RAY Micro QR (Elevator)
1 x Glidder Mü13e (Bergfalke)
1 x Carbon plate 350x150x1.0 mm
1 x Slave-cable USB Easy Sim
3 x 3 LiPo XH>EH adapter
1 x 28x10 BIELA propeller
1 x 23x8 BIELA propeller
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x DPSI RV Mini 6 Magic with Gas-Cap switch
1 x DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch
1 x Futaba 76/92 mm servo pull-pull double arm with ball link
1 x Futaba 50/60 mm servo pull-pull double arm with ball link
1 x PVC 0,14 qmm servos wire Graupner (100 m)
1 x Futaba 30 mm servo arm with M3 ball link
1 x Cabel "Y" 30 cm (graupner)
1 x Black silicone 0,25 mm² wire (25 m)
1 x PVC blue transparent battery termo-retract 95 mm (1 m)
1 x 23x10 BIELA propeller
1 x Fresa corte diamante Ø 2.7mm (bola)
1 x Dust collector for mould cleaning
1 x 16x8 BIELA propeller (4-blades) Corsair Scale
1 x 19x8 BIELA propeller
1 x Fresa corte diamante Ø 1.4mm (bola)
1 x PERMAGRIT Sanding Block 45° 140x51 mm
1 x FIALA Propeller 25x10
1 x Heat Seal Iron
1 x Laminating brush 10 mm, pack/ 50 pcs
1 x EWC3 40 cm wing connector
1 x Combo lighting module with covering drop shape
1 x DPSI RV Mini 5 (2008)
1 x DPSI OCP Overload protection
2 x Male Prolonger TP 4/5S
2 x Female connector JST SH 1.0mm with 10 cm wire
1 x 17 mm servo arm with ball link DES Graupner
1 x Canopy Sweet / Siesta
1 x Spinner 3BL propeller pleg. 36 mm / 4,0 mm
1 x Central piece 47 mm + 2,5º
1 x Aluminum Fold Prop Spinner 30 mm / 3.17 mm
1 x DPS Switch JR/JR
1 x EWC3 100 cm wing connector
1 x DPSI Ampere & Voltage bundle
1 x Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
18,484.89EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies