Top » Catalog » Hardware » Adhesives/Resin/Epoxy » Cianocrylate » Cyanocrylate R&G » R1501022

4.47EUR

CA Glue (medium) 20g
[R1501022]

CA Glue (medium) is a medium viscosity cyanoacrylate adhesive, suitable for bonding applications that require a larger gap fill.
Its medium cure speed and medium viscosity makes CA Glue (medium) suitable for a lot of industrial applications.
Single-component
Transparent
Solvent-free
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

temporarily out of stock

Reviews

Customers who bought this product also purchased

Propeller MENZ-S 23x8 temporarily out of stock	Sparkplug NGK CM6 temporarily out of stock	TYGON tubo 1 m Diam. 3.4 x 2.0 mm temporarily out of stock
Tygon tube 6.35 - 3.18 mm 1m temporarily out of stock	Extender tip (6 pcs) temporarily out of stock	CA Glue fast 20g temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
      BSI Cianocrilates
      Cyanocrylate R&G
      KAVAN Ciano
      Yuki Model
    Epoxy->
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

PT-22 Ryan Recruit 2290 mm (SEAGULL)
560.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Conector MR-60 (pareja)
1 x	EXTRA NG 74" yello/blue/red (Skywing RC)
1 x	Adaptadores carga 6s JST-XH
1 x	EXTRA NG 74" white/red/blue (Skywing RC)
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Small aluminium horn gold (2pcs)
1 x	Brass control horn M2 short for wire (2 pcs)
1 x	Horn 6/20 with M3 Bearing
1 x	Horn 20x28,5 mm (2 pcs)
2 x	Optical RPM Sensor
1 x	6 mm blue aluminium threaded horn with patella
1 x	Horn 6/35 with M3 Bearing
2 x	20 mm carbon horn
3 x	Threaded coupler ALU M3 Ø 6 (2 uds)
3 x	6 mm aluminium horn with patella
2 x	Horn 16,5x20 mm (2 pcs)
1 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	Cable with accesories
1 x	Starter EM Gear Power 80
1 x	Z Bender - S Type Tool
1 x	Starter 12v (Max 180 and 30ccm)
1 x	Ball Link Plier
2 x	Crimping tool
1 x	Screwdriver for Hexagon 1,5mm
1 x	Digital scale up to 40 kg
1 x	Vacuum pump P1-N
1 x
1 x	Vacuum Connection VA 1 (for hose Ø 6 mm)
2 x	Hot Glue Stick BLACK
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x	Crimping tool
1 x	Copier 5x20 cm pcs
1 x	Screwdriver for Hexagon 1,27mm
1 x	Starter Sullivan-STAR 603 DINATRON
1 x	Starter 12v (Max 90 and 15ccm)
1 x	Hot Glue Stick RED
1 x	Vacuum pump 12 CFM
1 x	Z Bender - S Type Tool
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	4 LiPo XH>EH adapter
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	Cabel charger transmitter GRAUPNER
1 x	TrainerCord (master-learner)
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	RF9 Flight Simulator with Spektrum Controller
1 x	SIMtransmitter 6 Mode 2
1 x	CC 03
2 x	APM2.6 Power module with 5.3V DC BEC
1 x	2 LiPo XH>EH adapter
1 x	Dean "T" - Futaba Adapter
1 x	CC 02
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	CM-3
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	Long pinned hinge (6 uds)
1 x	M3 black washers (4 pcs)
1 x	M2 5Diam short black ball link V2 (2 pcs)
1 x	Fox 4000 mm Airworld,canopy frame
1 x	Fox MDM 1 4000 mm DeLuxe,Fox 1:4 set of instruments for the f
1 x	Electric spoiler 300 mm (2 pcs)
1 x	X-RAY Micro QR (Fuselage with canopy)
1 x	Chili F3K 2 wing servo mounted
1 x	X-RAY Micro QR (Tail Tube)
1 x	Chili Race F3K 2 wing servo mounted(carbon biax)
1 x	BABY glider (Aero-naut)
1 x	2,5x60 mm allen screwdriver
1 x	2,0x50 mm allen screwdriver
1 x	Screwdriver for Torx® TX8
1 x	Turbina KINGTECH K320 G5
1 x	Starter EM Gear Power 250
1 x	120x60 mm SLH KOVO wheel
1 x	Horn for flap control (1 pcs)
1 x	Propeller POWER-PROP 7x7
1 x	Schul-Malpinsel Gr.5
1 x	Fresa corte diamante Ø 2.3mm (bola)
1 x	Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
1 x	LH long aluminium horn L31xH30 (2pcs)
1 x	Fresa corte diamante Ø 2.35mm (flame)
2 x
1 x	Mini-handed clamp
1 x	silicon 100 cm Futaba Extension Ø 0,35 mm
1 x	Antonov AN2 Scale 1/6 - 3m
1 x	EDGE 540-A 105" (2660 mm)
1 x	ANGEL 48" pp red/blue/white
1 x	EDGE 540-A 74" (1880 mm)
1 x	Ventus 1:4 set of instruments
1 x	ANGEL 48" pp orange/black/white
1 x	LASER 260 60" V2 ARF Yellow (SkyWing)
1 x	Hot Glue Stick GREEN
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	DYNAMOMETER S-1580
1 x	Horn with ball 55x40
1 x	Handle for PERMAGRIT lime
1 x	Small aluminium horn red (2pcs)
1 x	Fresa corte diamante Ø 1.0mm (bola)
1 x	Horn 13,5x16 mm (2 pcs)
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs)
1 x	Goma arrancador Ø36 mm x 30 mm
1 x	Modelling compound (Plastilin), sculptor's quality 1 Kg
2 x	XT-60 Plug Mold
1 x	MPX 8 pins plug mold
1 x	Cut tube
1 x	Sealing Iron STANDARD
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	wing/fuselage connector for 3 pines AWG 20-24
1 x	CC 01
1 x	BABY glider drawings (Aero-naut)
1 x	X-RAY Micro QR (Rudder)
1 x	E-FUN BUG (ROI-Import)
1 x	DINO Glider ARC
1 x	Glider PIROL
1 x	Glider STROLCH
1 x	IMPULSE 2 F3F
1 x	servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x	Vasa model Catapult
1 x	X-RAY Micro QR (Elevator)
1 x	Glidder Mü13e (Bergfalke)
1 x	Carbon plate 350x150x1.0 mm
1 x	Slave-cable USB Easy Sim
1 x	3 LiPo XH>EH adapter
1 x	28x10 BIELA propeller
1 x	23x8 BIELA propeller
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	DPSI RV Mini 6 Magic with Gas-Cap switch
1 x	DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch
1 x	Futaba 76/92 mm servo pull-pull double arm with ball link
1 x	Futaba 50/60 mm servo pull-pull double arm with ball link
1 x	PVC 0,14 qmm servos wire Graupner (100 m)
1 x	Futaba 30 mm servo arm with M3 ball link
1 x	Cabel "Y" 30 cm (graupner)
1 x	Black silicone 0,25 mm² wire (25 m)
1 x	PVC blue transparent battery termo-retract 95 mm (1 m)
1 x	23x10 BIELA propeller
1 x	Fresa corte diamante Ø 2.7mm (bola)
1 x	Dust collector for mould cleaning
1 x	16x8 BIELA propeller (4-blades) Corsair Scale
1 x	19x8 BIELA propeller
1 x	Fresa corte diamante Ø 1.4mm (bola)
1 x	PERMAGRIT Sanding Block 45° 140x51 mm
1 x	FIALA Propeller 25x10
1 x	Heat Seal Iron

17,819.91EUR