4.50EUR

CA Glue fast 20g
[R1501032]


CA Glue fast 20g
Superglue (fast) is a normal type Cyanoacrylate adhesive with fast setting, high flow abilit, and good penetration characteristics.

It has been specially formulated to achieve the strongest possible bond between well-mated, non-porous surfaces, such as rubber, metals, plastics, glass, etc.

Single-component
Transparent
Very low viscosity, high setting speed
Bonds obtain hand strength after 2-15 seconds
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

Physical properties
Liquid state
Base Ethyl Cyanoacrylat
Colour clear
Specific Gravity (at 20 °C) 1.053~1.060
Refraction Index (n 20 D) 1.439
Flash Point (°C) >80 °C
Boiling Point (°C) 65/6mm Hg
Viscosity (cP) 3-5
Cured state
Colour clear
Specific Gravity (at 20 °C) 1.1~1.3
Processing temperature -55 - 80 °C
Refraction Index (n 20 D) 1.49
Dielectric Constant (bei 10 MHz) 3.5
Dielectric Loss (bei 10 MHz) 0.067
Soluble in Acetone, Dimethyl formamide,Nitromethame and Dimethyl sulfoxide.
Bond strength (Tensile shear strength, cured for 24 hours at 20-25 °C)
kg/cm²
Rigid PVC to rigid PVC 40-60
ABS to ABS 50-70
Polycarbonate to polycarbonate 80-120
Polystyrene to polystyrene 30-45
Natural rubber to natural rubber 5-9
Steel to steel 190-210
Stainless steel to stainless steel 200-220
Aluminum to aluminum 160-180
Copper to copper 150-170
Steel to rigid PVC 50-60
Stainless steel to neoprene 5-10
SBR to SBR 5-10
Cure speed
Seconds
ABS to ABS 4-5
Wood to wood 50-60
ABS to stainless steel 5-10
NBR to stainless steel 3-5
NBR to NBR 3-5
Stainless steel to stainless steel 3-5
ABS to NBR 3-5
Wood to ABS 5-10
Storage and shelf life:
Our superglue can be stored in a cool and dark place for about 1 year (for example in the refrigerator at + 5 °C).
At room temperature about 6 months. At temperatures above 20 °C the shelf life is further reduced (e. g. in the summer months)


temporarily out of stock
temporarily out of stock

Reviews

Customers who bought this product also purchased
Sparkplug NGK CM6
Sparkplug NGK CM6

temporarily out of stock
temporarily out of stock

TYGON tubo 1 m Diam. 3.4 x 2.0  mm
TYGON tubo 1 m Diam. 3.4 x 2.0 mm

temporarily out of stock
temporarily out of stock

Tygon tube 6.35 - 3.18 mm 1m
Tygon tube 6.35 - 3.18 mm 1m

temporarily out of stock
temporarily out of stock

Propeller MENZ-S 23x8
Propeller MENZ-S 23x8

temporarily out of stock
temporarily out of stock

Conector BEC female (10 pcs)
Conector BEC female (10 pcs)

temporarily out of stock
temporarily out of stock

XT-60  connector (female)
XT-60 connector (female)

temporarily out of stock
temporarily out of stock

Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
      BSI Cianocrilates
      Cyanocrylate R&G
      KAVAN Ciano
      Yuki Model
    Epoxy->
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x 6 mm blue aluminium threaded horn with patella
3 x Brass control horn M4 short for wire (4 pcs)
2 x Horn 16,5x20 mm (2 pcs)
2 x Horn for flap control (1 pcs)
2 x Horn DU-BRO 1/2 (2 pcs)
2 x Horn micro type4 Ø 0,5 (2 pcs)
2 x Adjustable brass horn threaded M3
1 x Fully Threaded Steel Rod M2,5 (2 uds)
1 x Horn mando small (2 pcs)
2 x Horn 6/27 with M3 Bearing
2 x 6 mm M3 variable horn
2 x Horn F3A de Titanium 16 mm (2 units)
1 x Brass control horn M2 large for wire (2pcs)
2 x 5 mm M2 variable horn
1 x Horn 5/10 with M2 Bearing
1 x 20 mm carbon horn
1 x Extra-long adjustable aluminium control horn 2,8x34
2 x Extra long horn 60x30
5 x Horn 20x28,5 mm (2 pcs)
1 x 6 mm aluminium horn with patella
2 x 6 mm red aluminium threaded horn with patella
2 x Cable with accesories
3 x Horn mando long (2 pcs)
2 x Brass control horn M2 short for wire (2 pcs)
1 x Horn 6/35 with M3 Bearing
1 x Brass control horn M4 long for wire (4 pcs)
2 x Cable control set
1 x DYNAMOMETER S-1580
2 x BALSA trip 2.0x2.0x1000 mm
1 x Mahogany wood slat 2.0x2.0x1000 mm
2 x Steering arm 12 mm Ø 4 mm (2 uds)
1 x Electric spoiler 250 mm (2 pcs)
2 x Pine wood slat 1.5x3.0x1000 mm
1 x Cabin latch Fox MDM1 4m (pair)
2 x Locking cable tie 3.2x142 (uds)
2 x Cap closure 33/23.5mm (2 uds)
2 x Beech dowels 4.0 x 1000 mm
2 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x SUS wire 3m (nylon coated)
1 x Steering arm 12 mm Ø 4 mm
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x BALSA trip 2.0x10.0x1000 mm
2 x BALSA trip 10x10x1000 mm
1 x BALSA leading edge 8x10x1000 mm
1 x BALSA trip 5.0x5.0x1000 mm
2 x Locking cable tie 2.5x100 (uds)
1 x Screw-lock connector M2 (2 uds)
1 x Liston HAYA 10 x 10 x 1000 mm
2 x Locking cable tie 4.6x203 (uds)
1 x Screw-lock connector Ø 2 mm (2 uds)
1 x Steering arm 12 mm Ø 3 mm (2 uds)
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Trailing edge BALSA 35x8x1000 mm
2 x Pine wood slat 6.0x6.0x1000 mm
1 x OBECHI sheet 2.0x3.0x1000 mm
1 x Walnut wood slat 1.5x1.5x1000 mm
1 x Covered closure or fairings
1 x Stainless steel cable Ø 0.5 mm (20 m)
1 x Vasa model Catapult
2 x Motor A2212/13T
2 x LH long aluminium horn L31xH30 (2pcs)
2 x Horn 13,5x16 mm (2 pcs)
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Brass control horn M4 short for wire (10pcs)
3 x Threaded coupler ALU Left M3 Ø 4 (2 uds)
2 x RH long aluminium horn (2pcs)
3 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Extractor piñones 2.3/3.2 mm
2 x Small aluminium horn blue (2pcs)
1 x Threaded coupler ALU M3 Ø 5 (2 uds)
2 x Horn 5/20 with M2 Bearing
1 x Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x Horn with ball 55x40
1 x Horn 6/20 with M3 Bearing
1 x Horn with ball 40x30
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x Quicklock washer 1.5 mm (10 pcs)
1 x Aluminium wide washer M3 red (4 pcs)
1 x 1 m servo "Premium" wire (white/red/blue)
1 x Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x Green silicone 0,25 qmm wire (50 m)
1 x 30 cm BEC cable (male)
1 x Dean "T" - Futaba Adapter
1 x Parachute expulsion foam
1 x Connectors banna oro 4 mm (M/F)
1 x ABS tube 12.0x10.0x1000 mm
1 x Long ball link M1.6 (6 uds)
1 x Carbon fiber rod 5.0 mmx1000 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
2 x Rudder forward 70x28 "type Kato"
1 x Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x Sparkplug 1/4-32
1 x Support FUEL DOT V3
1 x Junta humo metalica G20 (DLE20/DLE20RA/DLE40)
1 x Junta humo metalica G85 (DLE85/DLE170)
1 x One touch canopy lock
1 x Pine wood slat 3.0x5.0x1000 mm
1 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x Pine wood slat 2.0x2.0x1000 mm
1 x Beech dowels 2.0 x 1000 mm
1 x Steering arm 16 mm Ø 3 mm (2 uds)
1 x Pine wood slat 2.0x10.0x1000 mm
1 x Stainless steel cable Ø 0.62 mm (10 m)
1 x Birch plywood plate 600x300x3.0 mm
1 x Balsa panel 1.0x100x1000 mm
1 x Beech dowels 3.0 x 1000 mm
1 x Mahogany wood slat 3.0x3.0x1000 mm
1 x Beech dowels 10 mm x 1000 mm
1 x Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs)
2 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x Wheel collar 3 mm Ø (4 uds)
1 x Crimping sleeves for cable 0.85 mm (10 pcs)
1 x Lead with adhesive (2 pcs)
1 x Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs)
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs)
1 x Wheel collar 6 mm Ø (4 uds)
1 x Pushrod greyline 4/3 with coupler M3
1 x LED blink wire flashing (orange - 2pcs)
1 x LED blink wire flashing (green - 2pcs)
2 x Small aluminium horn gold (2pcs)
1 x Small aluminium horn red (2pcs)
1 x 5 mm M2 variable inclined horn
1 x Small adjustable aluminium control horn with bearing 2,8x15
2 x Set Threaded coupler ALU M2,5 Ø 4 (2 uds)
3 x Long horn 50x26
1 x RX Battery Eneloop 4,8 V JR 2500 mAh
1 x Micro control horn T2 Ø 1
2 x Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x Brass control horn M3 short for wire (2 pcs)
1 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm
1 x Micro control horn (2 pcs)
1 x LH long black aluminium horn L31xH30 (2pcs)
1 x Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch
1 x Sanyo RX Battery Eneloop 6,0 V JR
1 x Battery LiFe TopFuel 3100 mAh 3s MTAG 30C
2 x Horn DUBRO 1/2A
1 x Indoor hinge with servo arm integraded
1 x Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm
1 x 6 mm M3 variable inclined horn
1 x Short adjustable control horn 3x24
1 x 1/12 Pilot "Fighter"
1 x 200 mm extensión servo HITEC/JR
1 x 1/10 Pilot "Jack"
1 x 102 mm INO spinner (carbon imitation)
1 x Spinner Alumin. fixed propeller 50 mm / 6,0 mm
1 x Spinner INOVA 45 mm White
1 x Spinner INOVA 63 mm White
1 x 51 mm INO spinner (carbon imitation)
1 x T-Hose connector 3-3-3 mm
1 x FESTO connector M5 Quick 4 mm
1 x 82 mm 12 mm axi 30 g F3A CF drilled spinner
1 x Spinner Alumin. fixed propeller 50 mm / 4,0 mm
1 x 70 mm INO spinner (carbon imitation)
1 x Spinner Alumin. fixed propeller 50 mm / 5,0 mm
1 x F3A carbon 75 mm spinner for Hacker C-50
1 x Spinner Alumin. fixed propeller 45 mm / 6,0 mm
1 x F3A carbon 85 mm spinner for Hacker Q-80
1 x Cono NUT 5/16"x 24 -M4
1 x Spinner INO 51 mm Chrome (Imitacion metal)
1 x Spinner INO 57 mm Chrome (Imitacion metal)
1 x Spinner INO 75 mm Chrome (Imitacion metal)
1 x Spinner INO 63 mm Chrome (Imitacion metal)
1 x Spinner Alumin. fixed propeller 45 mm / 5,0 mm
1 x F3A carbon 85 mm spinner for AXI
1 x 82 mm 12 mm axi 30 g F3A CF drilled spinner 3BL
1 x F3A carbon 80 mm spinner for Spark EVO
1 x Fibreglass-Spinner BS ∅155 x 200 mm
1 x Spinner fixed propeller 42 mm / 5,0 mm
1 x 38 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x Spinner Alumin. fixed propeller 50 mm / 3,2 mm
1 x 63 mm INO spinner (carbon imitation)
1 x 51 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x 89 mm INO spinner (carbon imitation)
1 x Spinner 82mm Black ventilado
1 x Allen wheel collar M4x4
1 x Jeti Black cap
1 x Telemetria XYCOY adapter
1 x Turbina X45 H "compact"
1 x Hopper 125 ml XICOY with support
5,596.06EUR
Manufacturers
Manufacturer Info
R-G.de
R-G.de Homepage
Other products
Languages
Español English
Currencies