Top » Catalog » Hardware » Power supply system/Data Recordi » Jeti » JETCB3202+

534.01EUR

DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch
[JETCB3202+]

JETI DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch

Product description and features
The Central Box 320 is designed for a complete management of multiple servos and two receiver batteries for a model with high security requirements.The Central Box 320 has an overload protection on each servo output, 8 channels for high-performance servos up to 60 kg / cm and 10 channels for standard servos up to 30 kg / cm. Especially for the use of powerful and power-hungry servos, the Central Box 320 has an aluminum housing for better cooling. The Central Box 320 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.

Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 320 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.

Compatibility with Futaba
The Central Box 320 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.

Switching on and off
The switching on and off process of the Central Box 320 is done with the supplied R/C switch.

Recommended receivers
Two compatible RSat2 receivers are included. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.

Features
Adjustable powerful BEC for voltage stabilization (connection of standard or HV servos)
DITEX servo telemetry support
Possibility to connect up to 3 receivers with serial communication
built-in Expander function with the possibility of independent connection of up to four JETI EX sensors
Input for magnetic switch or RC switch
Power supply batteries connected via MPX connector
100Hz mode of servo outputs (10ms period)
EX telemetry support (measurement of voltage, current, capacity, temperature, etc.)
Easy settings changes via DC/DS transmitter („Device explorer“)
Robust metal construction with mounting holes

temporarily out of stock

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
    Bavarian Demon
    Dymond
    Eagle Tree
    Emcotec
    Futaba
    Jeti
    PowerBoxSystems
    ROI IMPORT
    SebART
    Setlo
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

DUPLEX backpack for Jeti DS handheld transmitter
58.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Logo 400 SE VBar
2 x	LOGO 600 SX (kit)
1 x	Tail boom brace LOGO 480
1 x	Albatros red/white (Top Model)
1 x	Avia spare blue cockpit (Top Model)
1 x	90x60 mm standart servo cover
1 x	Bidule 111 3000 mm
1 x	Astra (Top Model)
1 x	ALBATROS 3.0 m (orange/white)
1 x	Bidule 55 V3 2460 mm
1 x	Angle measurer
1 x	Bidule 170 ARF 3.48 m
1 x	ARTIST 1.560 mm
1 x	Albatros ,spare cockpit (Top Model)
1 x	ACTIVE ARF Electric 1.995 mm
1 x	30 mm Alu spinner 3 mm pleg. propeller
1 x	VBar NEO VLink 6.x Express, neon-yellow
2 x	Adjustable launching hook
1 x	Motor OS 3820-1200 electric
1 x	Antena FUTABA receptor Standard 2.4 GHz ( 160 mm aprox.)
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch
1 x	Carbon fiber rod 16 mm x 1000 mm
1 x	Z type of cable coupler Ø 1 (2 uds)
1 x	Carbon fiber rod 0.8 mmx1000 mm
1 x	Vacuum bag, 1200 mm x 50 m
1 x	Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Cockpit plastic closing
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Receptor FUTABA R3106GF T-FHSS
1 x	Carbon fiber rod 1.5 mm x 1000 mm
2 x	Towing hook <3m
2 x	JETImodel SINGLE BEC
2 x	DUPLEX 2.4EX Expander E4
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	Extension PVC 150 cm (Graupner)
1 x	Extension 7.5 cm
1 x	Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x	200 mm extensión servo HITEC/JR
1 x	Carbon fiber flat 1000x3.0x0.5 mm
1 x	Stainless steel cable Ø 0.5 mm (2 m)
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Carbon roving DowAksa / 24k / 1600 tex
1 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	Extension silicon 35 cm male (Futaba)
1 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x	Carbon fiber rod 7.0 mmx1000 mm
1 x	Ball Link ALU M3 - RH (1 pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x	Canopy Latch
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Winter-Glove DS tx
1 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	DUPLEX 2.4EX MT 300 EX
1 x	Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x	Hand Pads for Tray JETI
1 x	Spray YELLOW Inca Lexan 150ml
1 x	Extension silicon 30 cm female (Graupner)
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Circlick securite
1 x	Beech dowels 2.0 x 1000 mm
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
2 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Steering arm 12 mm Ø 4 mm
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	Brass ball links BS M3 V1 (10 pcs)
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Antena FUTABA RX 606/607/6014/2006/2008/3008/7006/7008, 2 pcs.
1 x	Threaded coupler M3 (10 uds)
1 x	Stainless steel cable Ø 0.5 mm (10 m)
2 x	DUPLEX 2.4EX RC Power Switch 10
1 x	DUPLEX 2.4EX MFlow2 Gas 800
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Receptor FUTABA R7208SB FASSTest SBus2
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Extension 100 cm (Futaba)
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	Ferrita 27x14x7 mm
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	DUPLEX 2.4EX MSpeed PITOT <300 Km/h
1 x	20 g tin paste
1 x	DUPLEX 2.4EX Central Box 220 + 2x Rsat2
1 x	Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x	Carbon fiber rod 2.5 mmx1000 mm
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	Cable S.BUS 3 salidas 100 mm
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x	DUPLEX 2.4 EX MBar
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	Bungee HLG Premium
1 x	Simulador RealFlight RF-9.5 S (sin emisora)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	25 mm reinforced hinge
1 x	Extinguisher CO2 - 2 Kg
1 x	U Profile ABS 2,0x4,0x1000 mm
1 x	Receiver DUPLEX R3L EX 2.4 GHz
1 x	Servo TOPMODEL DS1413 T
1 x	Electric coversion set
2 x	Swift S1 De-luxe 3.730 mm
1 x	4 LiPo XH>EH adapter
1 x	DUPLEX 2.4EX MULi 6s M
2 x	DUPLEX Satellite receiver Rsat 900
1 x	ABS angle 5,0x5,0x1000 mm
1 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x	Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x	Micro flex hinge (12 uds)
1 x	DUPLEX MUI 50 Sensor
1 x	DUPLEX 2.4 EX MVario2
1 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x	VBar Control Touch, midnight black
1 x	Motor DLE 200cc Std
1 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x	58 mm micro servo cover
1 x	Sliding window 1:2,4 / 1.2,6 Scale
1 x	Ventus 2cx 4.5 m Cabling wings
1 x	Spare screw M3 6pcs.
1 x	Ventus 2cx 4.5 m
1 x	Retract undercarriage for gliders up to 2 Kg
1 x	XPower H PROP HUB Ø5.0/20mm +2,5°
1 x	PVC 0,14 qmm servo wire Futaba (5 m)
1 x	VITAPROP CARBON FOLDING PROP 15x9.5"
1 x	Cable tie mounts 4.3 (4 uds)
1 x	45 mm rods set for direction control
1 x	Rotor blade 3Bl Scale 1050R
1 x	100 mm rods set for direction control
1 x	7 Servo SET 9g DS MG + Full servo extension cable set for Avanti
1 x	Pitot tube JETI MSpeed DUPLEX
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Transmitter Stick Ends JETI DS-16/14
1 x	Servo MKS HV69
1 x	Servo MKS HV6120H
1 x	Cable grommet 9.5 mm (4 uds)
1 x	Cable grommet Ø 3.2 mm (4 uds)
1 x	Glass fabric 160 g/m² (Twill weave) 100 cm x 5m
1 x	BALSA triangular 15x15x1000 mm
1 x	Kwik link aluminio M3 L:30mm (6 uds) pinØ1.6mm Left
1 x	Electronic switch JETI SP06 Opto
1 x	Duplex 2.4 EX TopFuel MTAG Battery Reader
1 x	Jeti Box mini
1 x	Metal clevis M3 (10 uds)
1 x	Glass fabric 160 g/m² (Twill weave) 100 cm x 20m
1 x	Round Rod 1.0x3.5 cm
1 x	Fiberglass plate 350x150x0.5 mm
1 x	Carbon fiber rod 10 mm x 1000 mm
1 x	Fiberglass plate 350x150x2.5 mm
1 x	DUPLEX R18 EX 2,4GHz + Rsat2
1 x	Ferrita 17x10x6.5 mm
2 x	Jeti Advance Pro Program Card
1 x	Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6
1 x	SAVOX SH 1290 MG servo digi
1 x	Transmitter JETI Duplex DC-16 II RED Carbon Line Mod.2
1 x	Transmitter JETI Duplex DS-12 EX Multimod BLACK
1 x	Long pinned hinge (12 uds)
1 x	Aluminun wheel collar 4 mm Ø (4 uds)
1 x	RF9 Flight Simulator with Spektrum Controller
1 x	GameCommander USB Universal
1 x	Interface Realflight Simulator
1 x	EasyFLY Addon
1 x	Interface Jack Adapter IKARUS
1 x	DUPLEX MUI 30 Sensor
1 x	Profile ABS Square 4 x 1000 mm
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	ABS angle 4,0x4,0x1000 mm
1 x	Porta Kwik link M3 3 mm (2 pcs)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Servo MKS HV 777A+
1 x	Threaded coupler M2 (10 pcs)
1 x	Servo MKS HBL550
1 x	Switch Button DS Tx DUPLEX
1 x	Crimping sleeves for 1.1 mm cable (10 pcs)
1 x	Electronic switch JETI SP6 0-15v/6A
1 x	Pulley brass 5/1,5 (2 pcs)

23,705.17EUR