| 1 x | Beech dowels 3.0 x 1000 mm |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 1 x | BALSA triangular 15x15x1000 mm |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | quality beech plywood BIRCH 600x300x2.0 mm |
| 1 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 1 x | A/C quality beech plywood 600x300x1.5 mm |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | Pine wood slat 10x10x1000 mm |
| 1 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | Flap hinge (6 pcs) |
| 2 x | Miniature brass strap hinge, 1 m |
| 2 x | Gates hinge black 30x16 mm (2 pcs) |
| 2 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
| 1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
| 1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 3 x | Flap hinge 33x9 mm (6 pcs) |
| 2 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
| 3 x | Long pinned hinge (6 uds) |
| 2 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
| 2 x | 15 mm reinforced hinge |
| 2 x | Gates hinge |
| 2 x | Nylon hinge 20x15x0,3 (10 pcs) |
| 2 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
| 1 x | Long pinned hinge (12 uds) |
| 2 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
| 2 x | Nylon hinge for flaps 33x9 (2 pcs) |
| 2 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 3 x | Small pinned hinge (12 uds) |
| 1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
| 2 x | Micro flex hinge (12 uds) |
| 1 x | 25 mm reinforced hinge |
| 3 x | Nylon hinge 15x0,3 (10 pcs) |
| 2 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
| 1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
| 2 x | Carbon roving DowAksa / 24k / 1600 tex |
| 1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
| 1 x | Vacuum bag, 1200 mm x 50 m |
| 1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
| 1 x | PIX Hawk with accesories |
| 1 x | PPM Encoder Module |
| 1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
| 1 x | 6 mm red aluminium threaded horn with patella |
| 1 x | Strip ABS 2.0x8.0x1000 mm |
| 1 x | ABS Strip 1.0x2.0x1000 mm |
| 1 x | Angle measurer |
| 1 x | Slave-cable USB Easy Sim |
| 1 x | Balsa panel 2.0x100x1000 mm |
| 1 x | |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | Rudder |
| 1 x | Blades 330mm |
| 1 x | Steering lever |
| 1 x | 4 blades set |
| 1 x | Support ECU Xicoy X-45 |
| 1 x | Support Antena 2.4 Ghz (2 pcs) |
| 1 x | Support conector MPX (6 pcs) |
| 2 x | Gates hinge 30x16 mm (2 pcs) |
| 1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 1 x | ABS 500 x 400 x 0,5 mm (white) |
| 1 x | Foam plastic plates (310x210x2 mm) |
| 1 x | BATTWIN BATTERY REDUNDANCY SYSTEM |
| 1 x | Small pinned hinge (6 uds) |
| 2 x | Large flex hinge (12 uds) |
| 1 x | 18 mm reinforced hinge |
| 2 x | Foam plastic plates (310x210x5 mm) |
| 2 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
| 1 x | Styrene plate 320x120x0.5 mm |
| 1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
| 1 x | Battery bed V2_M (black) |
| 1 x | PVC grid diagonal 290x185x0.32 mm |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
| 1 x | Glass fibre sleeve Ø 20 mm X 10m |
| 1 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
| 1 x | Carbon fibre sandwich sheet 350x150x3 mm |
| 1 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
| 1 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | Fiberglass plate 350x150x2.5 mm |
| 2 x | PH5 adapter for 5mm M8 axi for AXI2820 y 2826 |
| 1 x | Horn DUBRO 1/2A |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
| 1 x | Horns indoor |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
| 1 x | Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs) |
| 1 x | Horn DU-BRO 1/2 (2 pcs) |
| 1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod M3 |
| 1 x | Rudder forward 70x28 "type Kato" |
| 1 x | Pushrod octagone 3/2 with coupler M2 |
| 1 x | Birch plywood plate 600x300x1.5 mm |
| 1 x | Micro control horn (2 pcs) |
| 1 x | Brass control horn M2 long for wire (10pcs) |
| 1 x | Horn mando long (2 pcs) |
| 1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
| 1 x | Long extra-strong control horn with bearing 2,8x34 |
| 1 x | Aluminium battery holder red |
| 1 x | LiPo Storage Box Type "P" |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
| 1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
| 1 x | Glass fibre sleeve Ø 20 mm |
| 1 x | Glass fabric 25 g (2 m²) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 1 x | Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
| 1 x | Battery bed V2_S (black) |
| 1 x | V tail SILENT DREAM 2.200 mm (Elec or Glider) |
| 1 x | LA500 tail empennage |
| 1 x | Blade Holder Full (3 blades) |
| 1 x | 3 blades set |
| 1 x | Aro pasacable Ø25 mm (4 pcs) |
| 1 x | Support Filtro FESTO |
| 1 x | Piñon motor rotor LA-500 |
| 1 x | Blade Holder Full (4 blades) |
| 1 x | Tail tube RAINBOW |
| 1 x | Blade Holder (3 blades) |
| 1 x | Aro pasacable Ø20 mm (4 pcs) |
| 1 x | Tube support Ø 6mm (10 pcs) |
| 1 x | Support FUEL DOT V3 |
| 1 x | LA500 freewheel bearing |
| 1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
| 1 x | ROBART POINT HINGE 4,7mm (5 pcs) |
| 1 x | Indoor hinge with servo arm integraded |
| 1 x | Small flex hinge (12 uds) |
| 1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
| 1 x | Pin type hinge Al 6x98 mm (2 pcs) |
| 1 x | Connectors banna oro 4 mm (M/F) |
| 1 x | Round flex hinge (12 uds) |
| 1 x | Medium pin type hinge (12 uds) |
| 2 x | Fiberglass plate 350x150x3.0 mm |
| 1 x | Fiberglass plate 1200x1000x0,2 mm |
| 1 x | Fiberglass plate 620x540x0,3 mm |
| 1 x | Long horn 50x26 |
| 1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
| 1 x | Carbon plate 550x350x4.0 mm ECOTECH |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
| 1 x | Peel ply 95 g/m² (plain weave) 20 mm x 100 m |
 |
| 5,133.10EUR |
