9.90EUR

Cyano SUPER - GOLD™ (12g)
[BSI126]


Cyanoacrylates (CAs) have become the adhesive of choice for most hobby and household applications. High quality CAs such as INSTA-CURE™, when used properly, form bonds that in many cases are stronger than the material that is being adhered. INSTA-CURE™ is a highly refined CA which, combined with its freshness, gives a guaranteed 2 year shelf life. CAs are reactive monomers that chemically link (polymerize) when pressed into a thin film. The very thin layer of water moisture present on most surfaces acts as an alkali, or weak base, which is the catalyst that results in bonding; however, the presence of detectable amounts of water usually degrades the performance of CAs.

SUPER-GOLD+™ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+™ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD +™ in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET™ to one piece and apply SUPER-GOLD+™ to the other before joining. Excess INSTA-SET™ may create too much heat, which can melt the foam. Both SUPER-GOLD™’s cure to a more flexible consistency for better shock absorbtion. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD™ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.


many units
many units

Reviews

Customers who bought this product also purchased
XT-90  connector (pair)
XT-90 connector (pair)

many units
many units

Nut for mounting M3 (4 pcs)
Nut for mounting M3 (4 pcs)

many units
many units

Nut for mounting M2 (4 pcs)
Nut for mounting M2 (4 pcs)

many units
many units

Carbon fiber rod 2.0 mmx1000 mm
Carbon fiber rod 2.0 mmx1000 mm

many units
many units

Carbon fiber rod 1.0 mm x 1000 mm
Carbon fiber rod 1.0 mm x 1000 mm

many units
many units

Nut for mounting M4 (4 pcs)
Nut for mounting M4 (4 pcs)

many units
many units

Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
      BSI Cianocrilates
      Cyanocrylate R&G
      KAVAN Ciano
      Yuki Model
    Epoxy->
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
3 x Straightened rod Ø 3.0 mm x 1000 mm
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x Vasa model Catapult
2 x Straightened rod Ø 7.0 mm x 1000 mm
1 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
3 x Straightened rod Ø 14.0 mm x 1000 mm
1 x Straightened threaded rod M3 - 1m
2 x Straightened threaded rod M2-1m
2 x Brass hexagonal rod Ø 5 mm x 1000 mm
1 x Straightened rod Ø 1.2 mm x 1500 mm
1 x Aluminium rod Ø 4.0 mm x 3000 mm
1 x Straightened rod Ø 1.0 mm x 1000 mm
1 x Brass rod Ø 1.5 mm x 1000 mm
3 x Extension silicon 30 cm male (Futaba)
2 x Premium servo extension 50cm
3 x Extension silicon 10 cm (Futaba)
1 x Extension 90 cm (Futaba)
3 x Premium servo extension 25cm
1 x Extension lead 15 cm Multiplex
1 x Extension silicon 10 cm (Graupner)
2 x Circlick securite
1 x Extension 7.5 cm
2 x Futaba Female 40 cm extension
1 x Prolongador S-Bus JR/JR 10cm
1 x Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x Cable silicona macho batt. receptor 30 cm (Graupner)
1 x silicon 100 cm Futaba Extension Ø 0,35 mm
2 x servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x Premium servo extension 100cm
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x Connectors banna oro 8,0 mm (M/F)
1 x L-Connector 1.0 mm x 1000 mm
1 x Aluminium cap bolt washer M3 black (8 pcs)
2 x FALCON 27X11 CARBON PROPELLER (GAS)
1 x Propeller MENZ-S 16x6
1 x Aluminium sheet 500x250x0,5mm
1 x Propeller MENZ-S 16x12
2 x Propeller MENZ-S 20x6 Pusher
1 x Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox
1 x Servo Robbe FS 525 BB MG HV
1 x Servo DITEX TD2612S
1 x Aluminium battery holder red
1 x Battery bed V2_M (black)
1 x Servo Robbe FS 128 BB MG HV Digital
1 x SERVO DES 806 Pignons
1 x SERVO DES 806 Pignons
1 x Gens Ace 25C 1200mAh 3S1P 11.1V Saddle Airsoft Gun Lipo Battery
1 x Set Altimeter SHRead
1 x Servo DITEX EL0510M
1 x Straightened rod Ø 1.5 mm x 1500 mm
1 x Straightened rod Ø 5.0 mm x 1000 mm
2 x Servo KST A08H V6.0 3,2Kg HV
2 x Brass rod Ø 0.5 mm x 1000 mm
1 x Straightened rod Ø 2.5 mm x 1000 mm
1 x Straightened rod Ø 4.5 mm x 1000 mm
1 x Straightened rod Ø 1.5 mm x 1000 mm
2 x Soporte servo KST X08/H and Plus
2 x Straightened rod Ø 0.5 mm x 1000 mm
1 x Straightened rod Ø 4.0 mm x 1000 mm
1 x PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x Goma arrancador Ø36 mm x 30 mm
1 x Llave dinamomterica 74 Z 0 0 21
1 x Propeller diller 5/6,3/8/9
1 x Laminating brush 10 mm, pack/ 50 pcs
1 x Heli blades angle measurer
1 x HPP-21 PLUS PC Programmer for Hitec Digital Servos
2 x Propeller diller for DLE111 and DA85-150
1 x Propeller drill jig DA-35/50/60/70
1 x Latex Gloves GRIP, size L, box/ 100 pcs
2 x Kwik link unmount tool
2 x Mini-handed clamp
1 x Propeller diller for DLE170
1 x Hot Glue Stick BLACK
1 x Mini Lock Grips 2PCS
1 x Straightened rod Ø 0.8 mm x 1000 mm
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
2 x Brass hexagonal rod Ø 3 mm x 1000 mm
1 x Servo KST X10 V2.0 ala 10mm 28g 10.8Kg
1 x Extension silicon 25 cm (Futaba)
2 x Cable silicona female batt. receptor 30 cm (Futaba)
1 x PET film Mylar® A 350, 50 cm, roll/ 5 m
1 x Extension silicon 75 cm (Graupner)
1 x Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x Extension 100 cm (Futaba)
1 x Extension silicon 100 cm (Graupner)
1 x Carbon plate 550x350x2.5 mm ECOTECH
1 x Extension silicon 50 cm (Futaba)
1 x Propeller POWER-PROP 7x7
1 x KingTech T-Modul 5 in 1 Telemetry
1 x Propeller MENZ-S 15x12
1 x Propeller MENZ-S 34x14
1 x Exhaust K45TP
1 x Turbina KINGTECH K65 G4+
1 x Kerostarter K30G
1 x Turbina KINGTECH K320 G5
1 x Burner Plug K30/ K45
1 x Turbine KINGTECH K160 G4
1 x FALCON 28X10 CARBON PROPELLER (GAS)
1 x Balsa panel 2.0x100x1000 mm
1 x FALCON 28X11 CARBON PROPELLER (GAS)
1 x Propeller FALCON 27x10 3-BL carbono-gas
1 x Propeller MENZ-S 15x10
1 x Propeller MENZ-S 21x12
1 x Propeller MENZ-S 19x10
1 x Propeller MENZ-S 16x6 3-Blades
1 x Altimeter Altis NAO
1 x Propeller MENZ-S 19x12
1 x Propeller MENZ-S 21x8 3-Blades
1 x Propeller MENZ-S 20x6
1 x FALCON 20X9 CARBON PROPELLER (GAS)
1 x Propeller MENZ-S 20x8
1 x Propeller MENZ-S 18x12
1 x Telemetry interface ALTIS 12 cm
1 x Propeller MENZ-S 17x8
1 x Propeller MENZ-S 18x10
1 x Propeller MENZ-S 20x8 Pusher
1 x TopFuel LiPo 20C-ECO-X 4500mAh 6S MTAG
1 x PHASOR RACE 2035/4100 1D
1 x Servo HITEC D131 MW nano
1 x TopFuel LiPo 20C-ECO-X 5800mAh 4S
2 x Soporte servo KST X10 mini / DS135MG
1 x Z Bender - S Type Tool
1 x Mini Infrared Thermomiter
1 x Suction funnel for carburetor 90D-L (red)
1 x PERMAGRIT Sanding Block 45° 140x51 mm
1 x JM electric Pump
1 x Propeller MEJLIK 22x10
1 x Propeller MEJLIK 21x8 CFK
1 x Propeller MEJLIK 30x12
1 x Propeller MEJZLIK 9,5x3 SF Carbon Indoor
1 x Propeller MEJLIK 28x10
1 x Propeller MEJLIK 27x12 TH
1 x Extension 15 cm (Futaba)
1 x Propeller MENZ-S 21x8
1 x Sanyo TX Battery Eneloop 9,6 V Futaba
1 x AXI 2826/8 V2
1 x SSPS105 Super Hi-Power servo
1 x AXI 2808/24 V2
1 x Bird (Aero-naut)
1 x AXI 2814/16 V2 Long
1 x Sanyo TX Battery Eneloop 9,6 V 2500 mAh
1 x AXI 2814/12 V2
1 x Motor Mega AC 16/07/12
1 x Axi for MVVS 3.5 Sport
1 x SERVO DES 658 BB MG
1 x Servo HITEC HS-225 MG
1 x Receptor MINIMA 6S HITEC
1 x HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos
1 x TopFuel LiPo 20C-ECO-X 2400mAh 2S MTAG
1 x Servo HITEC D145 SW
1 x HITEC DPC-11 programmer
1 x TopFuel LiPo 35C-ECO-X 7500mAh 6S MTAG
1 x EVP Unit for AXI2208/xx and 2212/xx
1 x Motor OS 3805-1200 electric
1 x 2,5x60 mm allen screwdriver
1 x Y-Hose connector 2-2-2 mm
1 x Propeller drill jig DA 100/85/120/150/200 and VM 60-210
1 x Quick hose connector 4-4 mm
1 x Vacuum pump P1-N
1 x Propeller diller for EME35 and DLE35
1 x Ignition bed V2 Red color
1 x FESTO Filter 6 mm
1 x Tap FESTO 6-6 mm
1 x FESTO connector M7 barb fitting XL Tygon
1 x FESTO connector M7 Quick 4 mm
1 x Digital scale up to 40 kg
1 x Variable Flow Smoke Pump System
1 x Propeller MEJLIK 26x12 N-3 Blades
1 x Propeller MEJLIK 23x8 CFK
1 x Propeller MEJLIK 24x10 TH
1 x Propeller MEJZLIK 21x10 Electric light (36 g)
1 x Propeller MEJZLIK 20x10 Electric light (36 g)
1 x Propeller MEJLIK 32x12 EVO
1 x Propeller MEJLIK 20x13 N-3 Blades
1 x PropCover 16-20" (1 pcs)
1 x Propeller MEJLIK 20x8 CFK
1 x Propeller MEJZLIK 22x10 Electric light (36 g)
1 x PropCover 16-20" (2 pcs)
1 x Servo KST X10 MINI wing 10mm 23g 7.5Kg
1 x Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor
1 x Servo KST MS825 V8.0 35kg 8.4v
1 x Premium servo extension 75cm
1 x Extension silicon 100 cm (Futaba)
18,467.00EUR
Manufacturers
Manufacturer Info
BSI
Other products
Languages
Español English
Currencies