430.00EUR 375.00EUR

MZ-18, 9 Channel HoTT
[GRAS1005]


Description:
Graupner/SJ mz-18 HoTT 2.4GHz 9 Channel transmitteris designed with Graupner/SJ's unique telemetry technology that support Bi-directional data transmission gives user the real-time information. The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference. mz-18 has 30 model memories and it is suitable for any aircraft, Aditionally, with up to 9 available channels, built-in telemetry with data logging capabilities and 3.5" large TFT LCD with specialized touch pannel, mz-18 is the obvious choice for anyone who needs a high quality 9 channel radio.

Features:
- HoTT (HOPPING TELEMETRY TRANSMISSION) bi-directional 2.4 GHz technology
- The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference.
- 3.5" clolor TFT LCD with specialized touch pannel and user friendly interface
- Smart voice announcement system (Speaker and Earphone) for warnings and alarms at real time
- Real-time data analysis with optional sensor (GPS, Fuel status, Temperature, Voltage, Current) and sensor board (General air module, General engine module)
- Real-time telemetry analysis for Brushless Control Telemetry ESC such as RPM, consumption current, voltage, ESC temperature, Warning'
- Advanced HoTT wired/wireless trainer system
- Multi binding receiver system that 2 receivers can be connected in paralleled to use additional servos
- High-precision quad ball bearing gimbals (total 8ea) lead the smooth and comfortable stick feeling
- Standard micro SD Memory cards to sharemodel setup, expand model memeory
- 30 model memories
- Model copy function for model memories
- Staying up to date with the latest Graupner/SJ Firmware

- Programming options:
- 30 model memories(Available to expand model memory, using SD card)
- 6 Q.link functions
- 3 Model types(Helicopter, Airplane, Glider)
- Helicopter Function
- Q.link function x 6
- 6 swash plate types (1 Servo, 2 Servo 180, 3 Servo 120, 3 Servo 140, 3 Servo(Elevator), 4 Servo 90)
- Pitch Curves (7-point)
- Throttle Curves (7-point)
- Pitch, Throttle Trim function x 6
- Swash Limit function
- Swash Limit mix function
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Throttle mixing function (AILE>>THRO, ELEV>>THRO, RUDD>>THRO)
- Airplane Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Snap roll function
- Aileron Diff function
- Flap sett function
- Airbrake function
- Idle Low function
- Glider Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Aileron Diff function
- Flap MIX function (FLAP, AILE>>FLAP, ELEV>>FLAP, FLAP>>ELEV)
- Flap sett function
- Butterfly function

Specification:
- Control function: 9
- Temperature range: -10...+55 °C
- Aerial length: 120 mm
- All-up weight, approx.: 840 g
- Frequency: 2400...2483,5 MHz
- Range approx.: 4000 m
- Dimensions (LxWxH): 194x287x112 mm
- Modulation: FHSS
- Charging rate: 510 mA
- Operating voltage: 3,4...6,0 V
- Warnhinweis: Warnhinweis_14+_EN




temporarily out of stock
temporarily out of stock

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
    2,4 GHz antenna exit guides
    Transmitters accesories
    Transmiters->
      Futaba
      Graupner
      Jeti
      Jeti Accesories
      Multiplex
      Multiplex Accesorios
      PowerBox CORE
      RCM Pelikan
      Secraft
      Spektrum
      FrySky
    Receivers->
    2,4GHz Modules->
    Crystals->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Propeller balancer
2 x Truck-trailer for gliders 720 x 239 mm
1 x Field folding model stand SebArt
2 x Angle of incidence meter
2 x Medidor ángulos y/o incidencias
3 x Truck-trailer for gliders 720 x 285 mm
1 x Surface Indicator Gauge Small
3 x WingFix ULTRA Black Edition
1 x 8 mm Adapter for AXI53xx
1 x PH6 adapter for 6mm M10 AXI for AXI41xx
1 x 2,3 mm Prop Drive Günther M4
1 x 5 mm Prop Adapter M6
1 x 2,3 mm Prop Adapter M5
1 x 4 mm Prop Adapter M6
1 x Extension silicon 25 cm (Graupner)
2 x Cable silicona macho batt. receptor 30 cm (Futaba)
1 x Cable silicona female batt. receptor 30 cm (Futaba)
1 x Cabel "Y" 15 cm
1 x Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x Cabel "Y" 30 cm (graupner)
1 x Extension silicon 50 cm (Futaba)
2 x Circlick securite
1 x Extension 7.5 cm
1 x Futaba Female 40 cm extension
1 x Extension silicon 25 cm (Futaba)
1 x Cabel "Y" 30 cm (Futaba)
1 x Cable S.BUS 3 salidas 100 mm
2 x Ventus 1:4 set of instruments
1 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x Straightened rod Ø 4.0 mm x 1000 mm
1 x Straightened rod Ø 14.0 mm x 1000 mm
1 x Straightened rod Ø 4.5 mm x 1000 mm
1 x Brass rod Ø 1.0 mm x 1000 mm
1 x Straightened rod Ø 2.5 mm x 1000 mm
1 x Straightened rod Ø 5.5 mm x 1000 mm
2 x Brass rod Ø 0.8 mm x 1000 mm
1 x Straightened rod Ø 0.8 mm x 1000 mm
1 x Brass hexagonal rod Ø 5 mm x 1000 mm
1 x Straightened threaded rod M2-1m
2 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x Straightened rod Ø 1.5 mm x 1500 mm
1 x BALSA trip 2.0x10.0x1000 mm
1 x BALSA trip 8.0x8.0x1000 mm
2 x Angle measurer
1 x Support conector MPX (6 pcs)
1 x Aro pasacable Ø20 mm (4 pcs)
2 x Brass rod Ø 0.5 mm x 1000 mm
1 x Sanyo RX Battery Eneloop 6,0 V Futaba
1 x silicon 100 cm Futaba Extension Ø 0,35 mm
1 x Extension PVC 150 cm (Graupner)
1 x Cable silicona macho batt. receptor 30 cm (Graupner)
1 x Blue aluminium servo arm V2-Hitec 1,5 inch M3
1 x Blue aluminium servo arm V1-Hitec 1,0" inch M2
1 x Red aluminium servo arm V3-Futaba 1,0inch
1 x Red aluminium servo arm V1-Futaba 23 mm M2
1 x Gold aluminium servo arm V2-JR 1,25" inch M3
1 x L-Connector 1.0 mm x 1000 mm
1 x Flat Connector 4.0 mm x 1000 mm
1 x Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x U Profile ABS 3,0x6,0x1000 mm
1 x Profile ABS Square 4 x 1000 mm
1 x Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x ABS angle 3,0x3,0x1000 mm
1 x Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x Futaba male 40 cm extension
1 x Futaba Female 40 cm extension
1 x 0,14 mm PVC servo wire extension, ZH micro conector.
1 x Extension silicon 35 cm male (Futaba)
1 x Extension silicon 100 cm (Graupner)
1 x Extension silicon 30 cm male (Graupner)
1 x Sanyo RX Battery Eneloop 4,8 V JR
1 x Gens Ace 25C 1200mAh 3S1P 11.1V Saddle Airsoft Gun Lipo Battery
1 x Sanyo Eneloop AA 1,2 V 2400 mAh battery
1 x Sanyo RX Battery Eneloop RX 4,8 V Futaba
1 x Straightened rod Ø 2.0 mm x 1000 mm
1 x Sanyo RX Battery Eneloop 6,0 V FUT
1 x Straightened rod Ø 5.0 mm x 1000 mm
1 x Field folding model stand
1 x Indoor motor holder
1 x Motor mount for 1 m models
1 x Electric coversion set
1 x Fiberglass motor-holder for electric motors
1 x ALBATROS L-39 G2 "Camo Tiger" Turbine ready
1 x 150 mm inflatable superlight deluxe wheel (2 pcs)
1 x Aluminun wheel collar 3 mm Ø (4 uds)
1 x 3,2 mm Prop Adapter M5
1 x Adaptadores carga 6s JST-XH
1 x Dummy motor GPW Wasp Scale 1/4
1 x 5 mm Prop Adapter M8
1 x Adapter 4,0 mm M8
1 x Debonder CA 20g
1 x 
1 x Ciano KAVAN Thin 20g
1 x Soporte grifo FESTO vertical (1 pcs)
1 x Recessed MPX connector support (6 pcs)
1 x VIPER JET G2 Esq. 3 Orange/Black
1 x 10 mm gas motor standoff
1 x Receiver bed (Blue)
1 x Cables suitable for the motor AC 28/7
1 x Metalic motor holder for class 550-600
1 x Size "M" motor holder for class 400
1 x Cooler motor type 150
1 x Frontal support Speed 280
1 x Size "M" motor holder for class 600
1 x Ø 28 mm fiberglass motor-holder for electric motors
1 x aluminium servo arm V1-JR 1,0 inch M2
1 x Ø 38 mm fiberglass motor-holder for electric motors
1 x Motor mount M
1 x Size "M" motor holder for class 400
1 x Rudder 2_Tray 4~4.5 inch
1 x Fan for A60
1 x Motor mount for 1200 mm models
1 x Motor holder for AC 28/7
1 x Disipador para motor Hacker B 20 (or motors up to Ø20 mm)
1 x VIPER JET G2 Esq. 5 Green/White/Blue
1 x Central support Speed 600
1 x Frontal support Speed 600
7,057.43EUR
Manufacturers
Manufacturer Info
Graupner
Graupner Homepage
Other products
Languages
Español English
Currencies