60.00EUR

Servo GO-12S70MG 20.5kg.cm 0.06s/60º
[KAV2012S70MG]


High torque/extra high speed programmable digital standard servo 69g with a coreless motor, hardened steel gears and wide input voltage range 4.8-8.4V, 2xBB; ideal for 1:8/1:10 on-road RC cars, etc. Torque 12.0kg.cm, speed 0.100s/60° at 4.8V, torque 15.0kg.cm, speed 0.082s/60° at 6.0V, torque 18.0kg.cm, speed 0.070s/60° at 7.4V, torque 20.5kg.cm, speed 0.060s/60° at 8.4V. An aluminium middle case heatsink for perfect cooling under high load. Dimensions 40x20x37.2mm, weight 69g.
High torque/extra high speed standard digital servo with a coreless motor and double BB-ed output shaft for general use in all kind of RC models - great for 1:10 on-road RC cars etc. A plastic case with middle aluminium heatsink for perfect cooling under high load.
GO-12S70MG is programmable using the KAVAN GO servo USB programmer/interface and PC software.
Programmable Functions
Servo Angle: Maximal servo rotation angle range setting. The default range is ca 120° within the regular RC signal pulse width range (900~2100 µs); ca 180° within the max. signal pulse width range (500~2500 µs).
Servo Neutral: Servo neutral (centre) position setting.
Damping Factor: Servo damping setting – adjust the characteristics of the servo when stopping.
PWM Power: Adjusts the servo output power. The higher the power, the higher the speed and torque of the servo – indeed also the current consumption will be higher.
Sensitivity: Servo sensitivity (Dead Band) setting. The higher sensitivity the narrower the dead band – servo moves only if the change of the signal pulse width is bigger than the dead band width. Too high setting may cause servo jitter in some applications. Range: Ultra High (ca 1 µs dead band) – High (ca 2 µs) – Medium (ca 3 µs) – Low (ca 4 µs)
Soft Start: Turns on/off the soft start feature. If ON, the servo goes slowly to the initial position corresponding to the servo signal once the power is switched on. Reverse: Reverses the servo movement direction.
Narrow Band: FUTABA SR Mode – only for use with FUTABA radio channels working in the SR mode. Do not turn the option on if you are using a different setting of your FUTABA radio or any other radio.
SANWA SSR: SANWA SSR Mode - only for use with SANWA radio channels working in the SSR mode. Do not turn the option on if you are using a different setting of your SANWA radio or any other radio.
Lost PPM Protection (Fail-Safe): In the case the control signal from the receiver is lost completely or cannot be decoded correctly (due to interference) the servo can use choose one of three fail-safe modes:
(a) Release: No fail-safe protection.
(b) Keep Position: Keeps the position corresponding to the last correct control signal.
(c) Go Neutral Position: The servo returns to the neutral (1500 µs pulse width) position.
Over Load protection: Enables or disables overload protection of the servo in three levels – once the overload conditions last for the pre-set time (in seconds), the output power of the servo is reduced to the corresponding pre-set level (% of the max. power).
Default: Restores the factory default setting of the connected servo.
Wide input voltage range 4.8-7.4 V (nominal).
25T/5.92 mm output shaft.
Servo dimensions Standard
Servo type Digital
Programmable Yes
Thrust at 4.8V [kg∙cm] 12
Thrust at 6.0V [kg∙cm] 15
Thrust at 7.4V [kg∙cm] 18
Thrust at 8.4V [kg∙cm] 20.5
Speed at 4.8V [s/60st.] 0.1
Speed at 6.0V [s/60st.] 0.082
Speed at 7.4V [s/60st.] 0.07
Speed at 8.4V [s/60st.] 0.06
Servo gears Metal
Ball bearings 2×
High-voltage Yes
Power supply [V] 4.8 - 8.4
Length [mm] 40
Width [mm] 20
Height [mm] 37.2
Weight [g] 69
Intended for Aeroplanes,Helicopters,On-road cars
Water resistance No


temporarily out of stock
temporarily out of stock

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
    Aero-naut
    BLUE BIRD servo
    DUBRO
    Dymond
    Electron Retracts
    FEMA
    FUTABA
    Gabriel-Stahlformenbau
    Graupner
    Hacker
    Hitec
    JETI
    KAVAN
    KST Servo
    MKS Servos
    MULTIPLEX
    PICHLER
    ROBBE
    ROI-Import
    Savox
    SebART
    Secraft
    Servos
    Thunder Power
    Tonegawa-Seiko
    Toni Clark
    Top Model
    VOLZ
    Acc.Electronics
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Paramotor Trike XL
2 x Opale Rucksack
3 x Para-RC Mix
2 x Windsock Ozone L -1200 mm
3 x Aramid 50 daN 50 m
1 x MAX pilot ARTF
2 x Parachute P4
1 x Para-RC Trike "RC-Bullix"
2 x Paramotor BackPack XXS (without accessories)
1 x Windsock Ozone L - 700 mm
2 x Parachute PV6 for F3J
2 x Wing OXY 0,5 pulgadas2
1 x Parachute BACKUP X100
1 x Paramotor BackPack XXS 2
1 x Set cintas unión paracaídas 145 cm
1 x Wing OXY 5,0 m2
1 x Ballast 700gr OPALE
2 x Paramotor Kit Camo H1.5/ Ben Red
1 x Trike XL motor set (motor+esc+prop)
2 x Rescue 1,8m2 / BackPack
1 x Propeller POWER-PROP 14x9 Izda
1 x Propeller POWER-PROP 13x9
2 x FALCON 20X9 CARBON PROPELLER (GAS)
1 x DUPLEX 2.4EX Central Box 210
1 x Propeller POWER-PROP 14x9
1 x Propeller APC 14x8.5 Electric Pusher
1 x 1/12 Pilot "Fighter"
1 x 1/12 Pilot "Tom"
3 x Straightened rod Ø 14.0 mm x 1000 mm
1 x Profile ABS half cane 2.5x1000 mm
1 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x Threaded coupler M2 (10 uds)
1 x LA500 nose
1 x LA500 ciclic lever
1 x LA500 tail empennage
2 x LA500 housing-lower cyclic
1 x LA500 rotor head shaft
1 x Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm)
1 x Aluminum Bayonet / strongal D35 mm / 1 m
1 x Propeller POWER-PROP 13x9 Izda
1 x LASER 73" 1.85m (05) PILOT
1 x Cargador para AA/AAA Ni-MH & Ni-Cd
1 x Motor mount class 48"
1 x Mobile Terminal
1 x Sandwich carbon + poplar 3mm + carbon 290x160 mm
1 x Carbon fiber rod 1.5 mm x 2000 mm
2 x LOWER TOW HOOK
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x M3 Maxi ball link (2 uds)
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x Screw-lock connector M2 (2 uds)
1 x Crimping sleeves for cable 0.85 mm (10 pcs)
1 x Electric spoiler 250 mm (2 pcs)
2 x EasyFLY Addon
1 x Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x Soporte filtro FESTO (4 pcs)
1 x Carbon fiber rod 2.0 mmx1000 mm
1 x Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
2 x Angle measurer
1 x Recessed MPX connector support (6 pcs)
1 x Couple M4 for wire (10 pcs)
1 x Kwik link AL M3 con Clip (2 pcs)
2 x Truck-trailer for gliders 720 x 239 mm
1 x Short ball link M1.6 (6 uds)
1 x Aluminium red ball links M3 V1 (10 pcs)
1 x WingFix ULTRA Black Edition
1 x SERVO HOLDER
1 x Carbon fiber flat 1000x6.0x0.8 mm
1 x Carbon fiber flat 1000x3.0x0.5 mm
1 x Steering arm 16 mm Ø 3 mm (2 uds)
1 x Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x BETA 1400 RTF Red
1 x 150 mm inflatable superlight deluxe wheel (2 pcs)
1 x 50 mm aluminium spinner (Kavan)
1 x POLARON EX 800w charger
1 x Nylon hinge 20x15x0,3 (10 pcs)
1 x 41x5,5 mm wires output (2 pcs)
1 x Battery Protection Circuit Board 22.2v 6s
1 x Birch plywood plate 600x300x3.0 mm
1 x Carbon fiber rod 10 mm x 1000 mm
1 x Conector MT-60 (pair)
1 x 45 mm aluminium spinner (Kavan)
1 x Connectors banna oro 4 mm (M/F)
1 x Charger LiPo Charger4
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x Walnut wood slat 2.0x2.0x1000 mm
1 x BALSA trip 2.0x10.0x1000 mm
1 x Horn 20x28,5 mm (2 pcs)
1 x Pine wood slat 6.0x6.0x1000 mm
1 x Linden wood slat 2.0x2.0x1000 mm
1 x Tip wing protector 30x10 (2 pcs)
1 x BALSA trip 5.0x5.0x1000 mm
1 x Pine wood slat 1.5x3.0x1000 mm
1 x MR30 connector male
1 x Socket Screw M3x9 mm
1 x Linden wood slat 3.0x3.0x1000 mm
1 x Nylon hinge 15x0,3 (10 pcs)
1 x BALSA trip 3.0x3.0x1000 mm
1 x Walnut wood slat 1.5x1.5x1000 mm
1 x Mahogany wood slat 3.0x3.0x1000 mm
1 x Lead with adhesive (2 pcs)
1 x Tip wing protector 28x10x12 (2 pcs)
1 x Horn 13,5x16 mm (2 pcs)
1 x Horn 16,5x20 mm (2 pcs)
1 x 
1 x BALSA trip 6.0x6.0x1000 mm
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x BALSA trip 4.0x4.0x1000 mm
1 x Connectors banna oro 3,5 mm (M/F)
1 x Carbon fiber flat 1000x3.0x0.13 mm
1 x Birch plywood plate 600x300x2.0 mm
1 x Carbon blade 3D 230 mm
1 x Black "FUEL VENT" round aluminum overflow socket
1 x Beech dowels 10 mm x 1000 mm
2 x Carbon fiber rod 12 mm x 1000 mm
1 x Carbon Non-Woven, 240 g/m² 100 cm x 5m
1 x Carbon fiber rod 14 mmx1000 mm
1 x Birch plywood plate 600x300x3.0 mm
1 x Captador RCEXL para DA
1 x Blind nut M2 (10 pcs)
1 x EDGE 540-A 105" (2660 mm)
1 x SLICK 360-A 104" (2640 mm)
1 x Surface Indicator Gauge Small
1 x Servo HITEC HS-55
1 x LA500 rotor head core
1 x FIALA 20X6 WOODEN 3-BLADE PROPELLER (GAS)
1 x FIALA Propeller 18x10
1 x Antenna FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M
1 x Switch Cap L (silver)
1 x Switch Cap M (blue)
1 x Transmitter Balancer Futaba V
1 x Crystal Universal RX 35.170 Ch 77
1 x 3 mm Prop Adapter M6
1 x Towing hook
1 x Carbon fiber rod 1.0 mm x 1000 mm
1 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x Fixed launching hook
1 x Carbon fiber rod 0.8 mmx1000 mm
1 x Carbon fiber rod 16 mm x 1000 mm
1 x STEERING FRONT WHEEL SYSTEM BIDULE 111
1 x Towing hook <3m
1 x Motor OS 3820-1200 electric
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm
1 x SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm
1 x Servo HITEC HS-225 BB
1 x Ball link M3 (10 pcs, flat ball)
1 x Ball link M3 (6 uds)
1 x Joint with bearing M2 22x5,5
1 x M2,5 Diam metal ball link V3 (2 pcs)
1 x Short ball link M2 (6 uds)
1 x M2,5 5Diam short black ball link V2 (2 pcs)
1 x Servo HITEC D950 TW
1 x Servo HITEC HS-5585MH
1 x LA500 pre-rotation gear
1 x LA500 pilot-seat set
1 x Crystal Universal TX 35.140 Ch 74
1 x FIALA Propeller 16x6
1 x Propeller FIALA 15x8 3-Blade
1 x V tail SILENT DREAM 2.200 mm (Elec or Glider)
1 x FIALA Propeller 28x10
1 x Transmitter Balancer SPK DX-8
1 x Switch Cap M (silver)
1 x Futaba Aero Large Case - Internal Foam
1 x Micro Crystal RX 35.010 Ch 61
1 x Transmitter Balancer HITEC Aurora 9, JR and Spectrum (blue)
1 x Switch moment button, 2 functions, long FUTABA
1 x LA500 pre-rotation gear hub
1 x 16x10 tree blades propeller Master Airscrew
1 x Porpeller HUNTER 480
1 x Micro Crystal RX 35.090 Ch 69
1 x 29,0 mm propeller (rigth propeller)
1 x 14 mm Portholes for screws (10 pcs)
1 x Propeller POWER-PROP 13x8
1 x 12x8 tree blades propeller
1 x 2 mm Prop Adapter M6
1 x Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m
1 x Legs + electric brakes for Viper Jet 90
1 x Combo FOXY C3530-700 + FOXY 80 amp
1 x Micro Crystal RX 35.160 Ch 76
1 x Fiberglass landing gear for 140-160
1 x Propeller electric carbon 10x6
1 x Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x CORTEX
1 x Truck-trailer for gliders 720 x 285 mm
1 x Wing bolts M6 Steel screw Blue (2 pcs)
16,946.07EUR
Manufacturers
Manufacturer Info
Kavan
Other products
Languages
Español English
Currencies