Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Bateria LiPo GRE24 600 mAh 3.7v
12.25EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Motor A2212/13T
1 x	Small aluminium horn red (2pcs)
2 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
2 x	Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x	Horn for flap control (1 pcs)
1 x	LH long black aluminium horn L31xH30 (2pcs)
2 x	Threaded coupler M3 (10 uds)
2 x	Brass control horn M4 short for wire (4 pcs)
1 x	2,3 mm Prop Adapter M5
1 x	LH long aluminium horn L31xH30 (2pcs)
2 x	Horn 6/35 with M3 Bearing
1 x	Silicone 0,50 qmm servos wire Graupner(5 m)
1 x	Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x	White silicone 0,25 qmm wire (150 m)
1 x	Adapter 3,2 mm M5 for spinner 30 mm fixed propeller
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	200m servo "Premium" wire (white/red/blue)
1 x	Adapter 3,0 mm M6
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Locking cable tie 4.6x203 (uds)
1 x	Steering arm 12 mm Ø 4 mm
1 x	PVC 0,14 qmm servo wire Futaba (5 m)
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	Connectors banna oro 0,8 mm (M/F)
1 x	SE Ring 350 mm (2 pcs)
1 x	SE Ring 300 mm (2 pcs)
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Adapter 3,0 mm M5 for spinner 30 mm fixed propeller
1 x	Steering arm 16 mm Ø 4 mm
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	Ventus 1:4 set of instruments
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	Extension 7.5 cm
1 x	Stainless steel cable Ø 0.62 mm (10 m)
1 x	Extension silicon 10 cm (Graupner)
1 x	Optical RPM Sensor
1 x	Prolongador S-Bus JR/JR 10cm
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Straightened threaded rod M2-1m
1 x	Extension 90 cm (Futaba)
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x	Extension silicon 30 cm female (Futaba)
1 x	Cable S.BUS 3 salidas 100 mm
1 x	Cabel "Y" 15 cm
1 x	Futaba Female 40 cm extension
1 x	Extension 100 cm (Futaba)
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	DYNAMOMETER S-1580
1 x	Cockpit plastic closing
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	2 mm male connector (2 pcs) with safety connector
1 x	Connectors DEANS 4 pins (1 pair)
1 x	Wing connector 8pin with pin strip, plug & socket
1 x	Gold antispark 4 mm plug
1 x	XH male balance (4S) connector (2 pcs)
1 x	Connectors banna oro 8,0 mm 5 pcs(Female)
1 x	EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x	Ball Link M2 with Ball and Hardware, 10 pcs
1 x	Ball link duraluminium M3 V1 (10 pcs)
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	VIPER 1.7 Tailpipe + Fuel Tank 1500ml
1 x	SE Ring 240 mm (2 pcs)
1 x	SE Ring 200 mm (2 pcs)
1 x	Screwdriver for Hexagon 1,5mm
1 x	Starter EM Gear Power 80
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Tape GFK 50 mm
1 x	Hexagonal ball head 2.0 x 50 mm
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x	SE Ring 480 mm (2 pcs)
2 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Copier 5x20 cm pcs
1 x	Copier 2x20 cm pcs
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	Starter 12v (Max 180 and 30ccm)
1 x	Release wax 250ml
1 x	Heat-conducting adhesive (2x2ml), WLK DK 4
1 x	Cyanoacrylate MD GLUE plus 405, for extreme loads 20g
2 x	Mixing tube for double syringes and cartridges (MR 1:1 and 2:1)
1 x	UHU Por 50ml/40g
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	CA Glue (medium) 20g
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x	Conector BEC male (10 pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	UHU hart 35 g
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	Motor DLE 430 cc - Paramotors
1 x	Epoxy 40 min (Hardener). 10Kg
1 x	Hardener Aero EPH 161 (250 g)
2 x	Horn mando long (2 pcs)
1 x	Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs)
1 x	Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x	Pegamento Pu R 50g polyuretano
1 x	FOAM - CURE™ (24g)
1 x	Hexagonal Nut M3 (10 pcs)
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	Vacuum bag, 1200 mm x 50 m
1 x	Epoxy 40 min (Resin). 5 Kg
1 x	Epoxy 5 min. 500 g (Resin)
1 x	Epoxy Resin L + Hardener LT kit/ 895g
1 x	Epoxy Resin HT 2 + Hardener HT 2, kit/ 296 g
1 x	Epoxy Resin L + Hardener L (40 min) 1Kg (715g Resin L + 285g Har
1 x	Epoxy Resin L + Hardener LT kit/ 3125g
1 x	Epoxy Resin L + Hardener L (40 min) 240g (200g Resin L + 40g Har
1 x	Epoxy 40 min (Hardener). 1 Kg
1 x	Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs)
1 x	Horn 5/20 with M2 Bearing
2 x	Brass control horn M2 short for wire (2 pcs)
1 x	Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled
1 x	Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs)
1 x	Brass control horn M4 long for wire (4 pcs)
1 x	Kwik link aluminio M3 L:30mm (6 uds) pinØ1.6mm Left
1 x	Horn with ball 55x40
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
2 x	Horn 6/20 with M3 Bearing
1 x	Foaming agent for epoxy resins 200 g
1 x	Epoxy Resin L + Hardener GL2, kit/ 930 g
1 x	Epoxy Resin L + Hardener L (40 min) 3.5 Kg (2.5 kg Resin L + 1 k
1 x	Epoxy 10 min 190g
1 x	Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
1 x	Epoxy Resin L + Hardener GL 1 (30 min)
1 x	Epoxy Casting Resin + Hardener "water-clear" (300 min)
1 x	Epoxy L 40 min. 10 kg (Resin)
1 x	Epoxy 40 min. 4kg (Hardener)
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 675g
1 x	Hardener Aero EPH 161 (500 g)
1 x	Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg
1 x	resin-hardener L-385 H-385 (1250 g)
1 x	Brass control horn M2 large for wire (2pcs)
1 x	6 mm blue aluminium threaded horn with patella
1 x	20 mm carbon horn
1 x	Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled
1 x	Servo arm with 6 mm hole to FEMA 9800A
1 x	Control horn long w/ball
1 x	6 mm aluminium horn with patella

10,152.78EUR