Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

VSpeak Modulo Glasses JETI
151.25EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

2 x	Acoplador Micro M2 Ø 1 mm (10 pcs)
1 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x	Ball link ALU M2,5/2 con rodamiento (1 pcs)
2 x	Ball link ALU M2/2 con rodamiento (1 pcs)
1 x	Acople ALU M2 Ø 4 (2 uds)
1 x	Acoplador M3 (10 uds)
1 x	Acoplador para cable M4 (10 pcs)
2 x	Acoplador M2,5 Ø 2 mm (10 pcs)
1 x	Ball link aluminio M3 V1 azul (10 pcs)
2 x	Ball link Aluminio M3 (2 pcs)
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x	Ball link M2 (10 pcs)
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
2 x	Acople ALU M3 Ø 6 (2 uds)
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	Ball link aluminio M3 V1 (10 pcs)
1 x	Acoplador "Z" Ø 2 (2 uds)
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
2 x	Acoplador M2,5 Ø 3 mm (10 pcs)
1 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Ball link ALU M3/2 con rodamiento (1 pcs)
1 x	Ball link latón BS M3 V1 (10 pcs)
2 x	Acople ALU M3 Ø 5 (2 uds)
1 x	Clevis con trasmisión M3
2 x	Acoplador Micro M2 Ø 0,8 mm (10 pcs)
1 x	Acople ALU M2,5 Ø 6 (2 uds)
1 x	Acople ALU M2,5 Ø 3 (2 uds)
2 x	Acoplador "Z" Ø 1 (2 uds)
1 x	Motor DLE 200cc Premium Muffler
2 x	Corona grade autoarranque DLE-170M
1 x	Silent-blocks DLE 170M
1 x	Helice FALCON 32,5x11 PUSHER Carbono
1 x	Motor DLE 170 M - Paramotores
1 x	Corona pequeña autoarranque DLE-170M
1 x	Rótula con rodamiento M2 22x5,5
1 x	Rótula corta M1.6 con bola/base (6 uds)
1 x	Rótula V1 larga M2/M1,6 3Diam negra (6 pcs)
1 x	Rótula 6 mm con bola M3 (10 pcs)
1 x	Rótula V2 corta M2 5Diam negra (2 pcs)
1 x	Rótula M3
1 x	Rótula V1 larga M2/M1,6 3Diam negra (2 pcs)
2 x	Rótula M3
1 x	Rótula V1 corta M2/M1,6 3Diam negra (6 pcs)
2 x	Rótula con bola plana M3 (10 pcs)
1 x	Rótula larga M1.6 con bola/base (6 uds)
1 x	Rótula V1 corta M2/M1,6 3Diam negra (2 pcs)
1 x	Rótula larga M3 con bola/base, tornillo y tuerca (2 uds)
1 x	Rótula V3 aluminio M2,5 Diam (2 pcs)
1 x	Rótula larga M3 con bola/tornillo (6 uds)
1 x	Rótula metálica M3/3 azul (2 pcs)
2 x	Rótula larga M2 con bola/tornillo (6 uds)
2 x	Rótula V3 aluminio M2,5 Diam con base corta (2 pcs)
1 x	Rótula corta M2 con bola/tornillo (6 uds)
1 x	Rótula V2 M2,5 5Diam negra (2 pcs)
2 x	Rótula M1.6 con tornillo y tuerca (6 uds)
1 x	Rótula INDUSTRIAL con bola M3 (2 uds)
1 x	Rótula M3 con tornillo y tuerca(6 uds)
1 x	Listón de BALSA 5,0x5,0x1000 mm
1 x	Iniciador FRX2 Wireless Receptor
1 x	Piloto 1/4 "Heidi"
1 x	Piloto Jet "Red" 1/6 Scale
1 x	Cinta fibra vidrio 25 mm
1 x	Tubo carbono (L 1000 mm, Ø16 mm, Ø14 mm)
1 x	Crimping sleeves para cables de 1.1 mm (10 pcs)
1 x	Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Acoplador "Z" Ø 1.8 (2 uds)
1 x	Polea de bronce 2,5/1 (2 pcs)
2 x	Tensor de riostras M1,6x17/27 (2pcs)
1 x	Soporte Pitot JETI
2 x	Hélice POWER-PROP 7x7
1 x	Soporte conector MPX (6 pcs)
1 x	Tensor de riostras M2x29/43 (2pcs)
2 x	Porta kwiw link M2,5 (10 pcs)
1 x	Rótula metálica M2/2 azul (2 pcs)
1 x	Rótula V2 M2 5Diam negra (2 pcs)
1 x	Bancada motor clase 48"
1 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
2 x	Bancada motor VANQUIST 48" F3A
1 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Hub DLE 30
1 x	Escape DLE 20-RA
1 x	Arillo pistón para motor 58/116 cc
1 x	Escape DLE 55
2 x	Junta culata MVVS 30 cc (3 pcs)
2 x	Rear cover O-ring 26/30 cc
1 x	Set Cilindro-Piston ensamblado MVVS 30cc
1 x	Varilla mando doble roscada duraluminio M3 50 mm (2 pcs)
1 x	Transmision funda/varilla greyline plastica 4/3 porta kwik link
1 x	Varilla mando doble roscada aluminio M3 100 mm (2 pcs)
1 x	Varilla mando doble roscada aluminio M3 100 mm (2 pcs)
1 x	Varilla mando doble roscada SUS303 M2.5 70mm (2 pcs)
1 x	Cera desmoldemante "Alta Temperatura" 340g
1 x	Motor DLE 430 cc - Paramotores
1 x	Rótula con bola M3 (10 pcs)
1 x	Rótula M3 RPA's-UAV's
1 x	Rótula larga M3 con bola/base, tornillo y tuerca (6 uds)
1 x	SLICK 360-B 104" (2640 mm)
1 x	EDGE 540-A 91" (2310 mm)
1 x	SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm
1 x	Sukhoi 29S 2,6 m,Tren carbono(SebART)
1 x	Sukhoi 29S 2,6 m Blanco/Azul (SebART)
1 x	Terminales riostras M2,5 (2 pcs)
1 x	Varilla mando roscada M3 (2 uds)
1 x	Sebart 2.2 m BLANCO/AZUL (SebART)
1 x	ULTRA STICK 30 cc ARF
1 x	ARS 300 91" ARF 2311mm ORANGE
1 x	SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm
1 x	EDGE 540 1.73m SEAGULL Model
2 x	SLICK 360-A 104" (2640 mm)
1 x	EDGE 540-A 105" (2660 mm)
1 x	EXTRA NG 74" white/red/blue (Skywing RC)
1 x	PITTS CHALLENGER 87″ 2.20m (120cc) 02 ARF
2 x	EXTRA 330L 35% pack hardware (Precision Aerobatics)
1 x	Terminales riostras M3 (10 uds)
1 x	Terminales riostras M2 (10 uds)
1 x	Terminales riostras M3x16 (2 uds)
1 x	Interface Jack Adapter IKARUS
1 x	Bisagra de Flaps (6 uds)
1 x	Plancha aluminio 500x250x0.5 mm
1 x	Varilla latón Ø 1,0 mm x 1000 mm
1 x	Encendido para motor DLE 111/120/170
1 x	SERVO DES 588 BB MG
1 x	Piloto civil "Pamela" tamaño 9cm (Slimline)
1 x	Tapaporos 500 ml (DOPE)
1 x	Plasti Dip Liquid Tape 429 ml rojo
1 x	Hélice POWER-PROP 14x9 Izda
1 x	Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
1 x	Bayoneta ULTIMATUM 2.0 m
1 x	Actuador lineal HLS12-100210-7.4v
1 x	Plasti Dip Liquid Tape 429 ml negro
1 x	Aerofly Professional Expansion Pack Vol. 1 PC-DVD
1 x	Morro OPTIMA 2.200 mm (Elec ó Planeador)
1 x	Regulador KOSMIK 160+ HV COOL
1 x	Hélice 44,0 mm (hélice izquierda)
1 x	Varilla latón hexagonal Ø 4 mm x 1000 mm
1 x	Carburador DLE 170M
1 x	Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm
1 x	Varilla mando roscada M2,5 (2 uds)
1 x	Carburador DLE 170
1 x	Chaveta DLE 85/111/120
1 x	Piloto "Duke" Legends Series(Slimline)
1 x	Piloto militar "Fly Boy" tamaño 9cm (Slimline)
1 x	Piloto civil "Gramps" tamaño 9cm (Slimline)
1 x	F1 Prop Cap Can (Conector para la botella de combustible)
1 x	Varilla acero Ø 14,0 mm x 1000 mm
1 x	DUPLEX 2.4EX Central Box 210
1 x	Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x	Cinta adhesiva impermeable, ancho 19 mm, largo 25 m
1 x	Cable simulador USB multiplayer
1 x	MXS-C (Mini) Azul
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	EXTRA 300L 1,2 m EPP Deep Purple
1 x	Cinta fibra carbono 25 mm 3k 125 g/m2 x 50m
1 x	YAK-23 "FLORA" (RBC Kits)
1 x	Helice FIALA 24x12
1 x	EDGE 540-A 74" (1880 mm)
1 x	Hélice BIELA 18x8 3Bl (Tripala)
1 x	Helice FIALA 23x10
1 x	Plancha carbono 350x150x3.0 mm
1 x	EDGE XL Orange
1 x	REVOLTO Azul
1 x	RV-8 ARF 70cc rojo/blanco/azul
1 x	Set motorización CHALLENGER Indoor
1 x	Varilla carbono plana 1000x6.0x0.8 mm
1 x	SF260 SIAI MARCHETTI 50E amarillo/negro (SebArt)
1 x	Manta bolsa de vacio 150 gr/m2 Bobina 50m
1 x	Hélice BIELA 16x8 3Bl (Tripala)
1 x	Helice FIALA 24x10
1 x	Helice APC 16x8 Glow/Gas

32,172.66EUR