Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

Hélice Falcon 22x12 eléctrica
105.00EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

3 x	Rótula con bola M3 (10 pcs)
3 x	Rótula V1 corta M2/M1,6 3Diam negra (6 pcs)
2 x	Rótula V3 aluminio M2,5 Diam con base corta (2 pcs)
1 x	Rótula M3 RPA's-UAV's
2 x	Rótula con bola M2 (10 pcs)
2 x	Rótula corta M2 con bola/tornillo (6 uds)
2 x	Rótula M3
3 x	Rótula con bola M2,5 (10 pcs)
1 x	Rotula 6 mm hexagonal con bola M3 (10 pcs)
1 x	Rótula V2 M2,5 5Diam negra (2 pcs)
4 x	Rótula larga M3 con bola/base, tornillo y tuerca (2 uds)
1 x	Rótula V3 aluminio M2,5 / 5 Diam con base corta (2 pcs)
1 x	Rótula MAXI con bola/tornillo M3 (2 uds)
3 x	Rótula con rodamiento M2,5 22x5,5
1 x	Rótula M1.6 con tornillo y tuerca (6 uds)
2 x	Rótula V1 corta M2/M1,6 3Diam negra (2 pcs)
2 x	Rótula larga M3 con bola/tornillo (6 uds)
1 x	Rótula con bola plana M3 (10 pcs)
2 x	Rótula V2 M2 5Diam negra (2 pcs)
1 x	Rótula corta M1.6 con bola/base (6 uds)
3 x	Rótula larga M2 con bola/tornillo (6 uds)
1 x	Rótula con rodamiento M3 22x5,5
2 x	Rótula INDUSTRIAL con bola M3 (2 uds)
2 x	Rótula larga M1.6 con bola/base (6 uds)
2 x	Rótula metálica M3/3 azul (2 pcs)
1 x	Rótula V3 aluminio M2,5 5Diam (2 pcs)
2 x	Cámara Sony 4140+673 CCD Board con emisor 5,8 GHz 200mw + antena
1 x	Sensor RPM Optico para Dinamometro
2 x	Horn con ball 55x40
1 x	Tubo acero (L 1000 mm, Ø12 mm, Ø11,7 mm)
1 x	Tubo ABS 8,0x6,0x1000 mm
1 x	Tubo ABS 5,0x4,0x156 mm
1 x	Tubo acero (L 1000 mm, Ø8 mm, Ø7,7 mm)
1 x	Horn aluminio pequeño azul (2pcs)
1 x	Horn de mando 6/27 con rótula M3
1 x	Tubo aluminio (L 1000 mm, Ø3,0 mm, Ø2,1 mm)
1 x	Horn aluminio anodiazado 6 mm rojo con rótula
1 x	Acople ALU Izda. M2,5 Ø 4 (2 uds)
1 x	Tubo acero (L 1000 mm, Ø4 mm, Ø3,7 mm)
1 x	Tubo ABS 5,0x4,0x1000 mm
1 x	Tubo acero (L 1000 mm, Ø9 mm, Ø8,7 mm)
1 x	Horn de control para SlowFlyer (3 pcs)
1 x	Tubo aluminio (L 1000 mm, Ø7,0 mm, Ø6,1 mm)
1 x	Tubo acero (L 1000 mm, Ø5 mm, Ø4,7 mm)
2 x	Tubo ABS 6,0x5,0x1000 mm
1 x	Tubo ABS 3,0x1,0x1000 mm
1 x	Acople ALU M2,5 Ø 3 (2 uds)
1 x	Tubo acero (L 1000 mm, Ø6 mm, Ø5,7 mm)
1 x	Horn con ball 40x30
1 x	Set de tubos de carbono (Ø38 mm y Ø14 mm)
1 x	Tubo ABS 4,0x2,0x1000 mm
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Tubo ABS 3,0x2,0x330 mm
1 x	Tubo ABS 18,0x16,0x1000 mm
2 x	Tubo ABS 6,0x4,0x1000 mm
1 x	Horn 13,5x16 mm (2 pcs)
1 x	Horn de mando 5/20 con rótula M2
1 x	Tubo ABS 9,0x8,0x1000 mm
1 x	Tubo acero (L 1000 mm, Ø3 mm, Ø2,7 mm)
1 x	Bisagra 15 mm reforzada
1 x	Bisagra correa de latón en miniatura 1m
1 x	Bisagra larga con pin metalico (12 uds)
1 x	Bisagra Micro flexible (12 uds)
1 x	Bisagra de Flaps 33x9 mm (6 uds)
1 x	Bisagra Cabina Discus 2c, 2a, Ventus 2cx (2 pcs)
1 x	Bisagra de aluminio tipo PIN 3,0x50 mm desmontable (2 pcs)
1 x	Catapulta Vasa model
1 x	Helice FALCON 20x9 carbono-gas
1 x	Hélice POWER-PROP 13x9
1 x	Bungee HLG Premium
1 x	Conector DEANS 4 pines (1 par)
1 x	Conector banana oro 0,8 mm
2 x	Conector ala MPX 8 pines con conector M/H
1 x	Conector CAN 15
1 x	Conector equilibrado XH (2S) hembra (2 pcs)
1 x	Conector DEANS hembra 30 cm
2 x	Conector BEC macho (10 pcs)
1 x	Conector 2 mm hembra (2 pcs) con conector de seguridad
1 x	Conector 5,0 mm EC5 hembra con funda (2 pcs)
1 x	Conector banana oro 6,0 mm Ultralight (pareja)
1 x	Conector banana oro 8,0 mm. 5 pcs (macho)
3 x	Conector banana oro 2,5 mm (pareja)
2 x	Conector equilibrado XH (5S) hembra (2 pcs)
1 x	Conector banana oro 2 mm
1 x	Conector banana oro 4 mm antichispa
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
3 x	Conector equilibrado XH (5S) macho (2 pcs)
1 x	Adaptador Sub-d conector MPX
1 x	Conector banana oro 2,5 mm (100 parejas)
2 x	Conector equilibrado XH (2S) macho (2 pcs)
1 x	Conector banana oro 6,0 mm
2 x	Conector DEANS (T)
2 x	Conector banana oro 8,0 mm
2 x	Conector equilibrado XH (4S) hembra (2 pcs)
1 x	Conector banana oro 4 mm
1 x	Varilla acero Ø 4,0 mm x 1000 mm
1 x	Prolongador cable servo POWERBOX 50cm
1 x	Prolongador cable servo POWERBOX 100cm
1 x	Listón de PINO 3,0x7,0x1000 mm
1 x	Arrancador 12v (Max 180 and 30ccm)
1 x	Varilla carbono plana 1000x3.0x1.0 mm
1 x	Adaptador 2 LiPos XH>EH
2 x	Soporte Antena 2.4 Ghz (2 pcs)
1 x	Bayoneta aluminio/strongal D12 mm/0,5 m
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	Rótula 6 mm con bola M3 (10 pcs)
2 x	Rótula M3
3 x	Rótula metálica M2/2 azul (2 pcs)
1 x	Camara 800 TVL CMOS para FPV
3 x	Rótula MAXI con bola/saliente M3 (2 uds)
2 x	Conector equilibrado XH (3S) macho (2 pcs)
2 x	Conector banana oro 3 mm
1 x	Horn micro (2 pcs)
1 x	Tubo carbono 3K-PW (Ø25 mm, Ø22.5 mm L:2000 mm)
1 x	Acople ALU M3 Ø 5 (2 uds)
1 x	Horn corto de latón M2 para cable (2 pcs)
1 x	Tubo ABS 7,0x5,0x1000 mm
1 x	Acople ALU M3 Ø 6 (2 uds)
1 x	Tubo de latón (L 1000 mm, Ø11,0 mm, Ø10,0 mm)
1 x	Horn 16,5x20 mm (2 pcs)
1 x	Tubo acero inox. Dia, 28 mm x 0.6 x 1000 mm
1 x	Tubo carbono 3K-PW (Ø30 mm, Ø26 mm L:1000 mm)
2 x	Rótula V2 corta M2,5 5Diam negra (2 pcs)
1 x	SIG Coverall 1,2x0,9 m
1 x	Conector equilibrado XH (3S) hembra (2 pcs)
1 x	Conector JAPAN G2 Set 5 pares
2 x	Conector XT-30 (hembra)
1 x	Sandwich carbon + poplar 3mm + carbon 480x290 mm
1 x	Conector MPX macho (doble PIN)
1 x	Conector banana oro 5,5 mm
2 x	Tapa estado carga XT-60 (6 pcs)
2 x	Funda conector 2 mm
1 x	Conector banana oro 3,5 mm
2 x	Conector MR30 (hembra)
1 x	Conector equilibrado XH (8S) hembra (2 pcs)
1 x	Conector equilibrado XH (7S) macho (2 pcs)
1 x	Conector micro DEANS (T)
1 x	Sandwich carbon + poplar 2mm + carbon 290x160 mm
1 x	Conector equilibrado XH (7S) hembra (2 pcs)
1 x	Adaptador trasero AXI 41xx V2
1 x	Soporte rojo para conectores de 4 mm
1 x	Oracover Gris claro 2m
1 x	Conector JR Servo hembra (50 pcs)
1 x	Conector XT-150 6mm (Set: 5 pares)
2 x	Conector 2 mm macho (2 pcs) con conector de seguridad
1 x	Conector 5,0 mm EC5 macho con funda (2 pcs)
2 x	Rótula V3 aluminio M3/5 Diam con base corta (2 pcs)
1 x	Rótula V1 larga M2/M1,6 3Diam negra (6 pcs)
1 x	Rótula larga M3 con bola/base, tornillo y tuerca (6 uds)
1 x	Rótula con rodamiento M2 22x5,5
1 x	Rótula MAXI sin bola M3 (2 uds)
1 x	Rótula M3 con tornillo y tuerca(6 uds)
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm
1 x	SistemaLDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 mm
1 x	Rótula V3 aluminio M3/5 Diam (2 pcs)
1 x	Adaptador frontal para AXI53xx
1 x	Tarjeta programadora KAVAN PRO
1 x	Tren aterrizaje Electrico ULTIMATUM 3.0 (Electro
1 x	Motor A30-14 L V4
1 x	AXI 2820/10 V2 Eje largo
1 x	Motor A200-6
1 x	AXI 2826/8 V2
1 x	AXI 2814/16 V2
1 x	Motor A30-12 L V4
1 x	Backmountset complete A40
1 x	AXI 2212/12 V2
1 x	AXI 2820/10 V2
1 x	AXI 2826/10 V2
1 x	AXI 2808/16 V2
1 x	LASER 73" 1.85m (05) PILOT
1 x	DUPLEX 2.4EX Central Box 210
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m
1 x	Acople ALU M2,5 Ø 6 (2 uds)
1 x	BULLIT 60 Ala 1095 mm
1 x	Carbon CUB FX-3 100-200 ARF, 4200 mm
1 x	Motor KAVAN PRO 2225-1600
1 x	Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x	Combo KAVAN C3536-1250 + KAVANA R50SB +
1 x	Termo-retráctil rojo tubo de 2,4x1000 mm 2:1
1 x	SAVAGE Max Red 1080 mm
2 x	Soporte bomba Xicoy X45
1 x	Tubo carton cohete 50mm x 48mm x 250mm
1 x	Soporte ECU Xicoy X-45
1 x	Pegatinas números para marcar
2 x	Soporte Angular conector XT-60 (2 pcs)
1 x	Soporte tubo Ø 6mm (10 pcs)
2 x	Aro pasacable Ø20 mm (4 pcs)
2 x	Soporte FUEL DOT V3
1 x	Soporte grifo FESTO (2 pcs)
2 x	Soporte conector MPX empotrado (6 pcs)
2 x	Soporte Filtro FESTO
2 x	Soporte grifo FESTO vertical (1 pcs)
2 x	Soporte Pitot JETI
2 x	Soporte filtro FESTO (4 pcs)
2 x	Soporte bomba/flitro Xicoy X45
2 x	Soporte conector MPX enrasado (6 pcs)
1 x	FesEx-Uni6 System
1 x	Carga cohete D9-7
1 x	Carga cohete D3-P
2 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	AXI 2820/12 CYCLONE
1 x	Eje para motor Hacker A60 L V4
1 x	Motor A20-12 L EVO
1 x	Eje para motor Hacker A60 L (140 mm)
1 x	A60-6XS V4 28-Pole
1 x	AXI 2814/10 V2
1 x	Motor A30-10 XL V4
1 x	AXI 2826/6 V2 Eje largo
1 x	AXI 2212/20 V2
1 x	Motor A20-26 M EVO
1 x	Motor A50-16 S V4
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	AXI 2814/10 V2 Eje largo
1 x	AXI 2217/20 V2 Long "F5J"
1 x	AXI 2826/10 V2 Eje largo
1 x	Motor A40-14 L 14-Polos V4
1 x	Motor A50-10L Turnado V3 Glider
1 x	AXI 2826/12 V2 Eje largo
1 x	AXI 2820/14 V2
1 x	Motor A50-12 L V4
1 x	Motor A30-14 M V2 6 Polos
1 x	AXI 2814/20 V2 Eje largo
1 x	AXI 2814/20 V2
1 x	AXI 2820/12 V2 Eje largo
1 x	Motor 1804 2400KV Qav 250 mini
1 x	Motor A60-7XS V4 28-pole kv330
1 x	AXI 2808/20 V2
1 x	Eje para motor Hacker A60-XS-V2 (112,5 mm)
1 x	AXI 2217/16 V2
1 x	Eje para motor Hacker A60-20/22/24S (120 mm)
1 x	AXI 2826/6 V2
1 x	Motor A30-12 XL Glider
1 x	Motor A20-20 L EVO
1 x	Motor A50-12 L Glider
1 x	AXI 2212/26 V2
1 x	AXI 2814/16 V2 Eje largo
1 x	AXI 2808/16 V2 Eje largo
1 x	Motor A40-10 L V2 14-Polos Glider
1 x	Motor A60-6XS V4 28-pole kv370
1 x	AXI 2826/12 V2
1 x	Motor B20-18 L + reductora 4:1
1 x	Eje para motor Hacker A30-XL V2
1 x	AXI 2814/6D V2
1 x	AXI 2814/12 V2 Eje largo
1 x	AXI 2808/20 V2 Eje largo
1 x	Motor A10-7 L 4,4:1
1 x	Motor A200-8
1 x	Eje para motor Hacker A20-S (3 uds)
1 x	AXI 2820/8 V2
1 x	Motor A50-14L Turnado V3 Glider
1 x	Motor A50-14 L 8-Polos Turbina eléctica
1 x	AXI 2808/24 V2
1 x	Motor 2212 (1000KV) Cuadricópero F450
1 x	AXI 2820/8 V2 Eje largo
1 x	AXI 2217/12 V2
1 x	Motor B40 10L + MAXON 4,4:1 Keramik
1 x	Eje para motor Hacker A40 L 8-Polos Turbina eléctica
1 x	Motor A60-5XS V4 28-pole kv420
1 x	AXI 2820/14 V2 Eje largo
1 x	Motor A20-22 L EVO
1 x	Soporte conector MPX (2 pcs)
1 x	Conector MPX 8 pins (verde) 1 par (macho-hembra)
1 x	Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x	Conector MPX macho
1 x	Conector MPX negro macho
1 x	Conector XT-60 (hembra)
1 x	PIN Conector hembra (100 pcs)
1 x	Conectores Kontronik (10 conectores, 5 pares)
1 x	Muleta 42 mm 0º
1 x	Muleta 42 mm + 2,5º
1 x	Muleta 38 mm 0º
1 x	Muleta 47 mm - 5º
1 x	Tapón antena V1 Futaba-JR (Plata)
1 x	Arandela conica ancha alumino M4 Rojo (4 pcs)
1 x	Soporte para cables L 10 mm (6 pcs)
1 x	Soporte trasero 25 mm para motor gasolina
1 x	Cono carbono autovent. hélice pleg. 38 mm/eje 6,0 mm/0º
1 x	Cono carbono autoventilado hélice pleg. 48 mm / eje 6,0 mm
1 x	Cono carbono autoventilado hélice pleg. 45 mm / eje 6,0 mm "Z"
1 x	Cono carbono autoventilado hélice pleg. 40 mm / eje 5,0 mm
1 x	Set gomas XS cono RFM (4 pcs)
1 x	Cono hélice plegable 30 mm diámetro / eje 3,2 mm
1 x	Cono Alumin. hélice pleg. 30 mm diámetro / eje 3,2 mm
1 x	Cono aluminio 30 mm / 3 mm helice plegable
1 x	Muleta 38 mm aluminio M8 Eje 8 mm "Z"
1 x	Muleta 72 mm 0º
1 x	Cono blanco 30-36 mm (recambio)
1 x	Muleta 42 mm 0º [12 mm]
1 x	Arandela conica alumino M4 rojo (8 pcs)
1 x	Arandela conica alumino M3 verde (8 pcs)
1 x	Soporte aluminio para encendido (rojo)
1 x	Arandela conica ancha alumino M3 oro (4 pcs)
1 x	Arandela conica ancha alumino M4 Oro (4 pcs)
1 x	Ball link aluminio M3 V1 rojo (10 pcs)
1 x	Cono carbono autovent. hélice pleg. 42 mm/eje 6,0 mm/0º
1 x	Cono carbono autovent. hélice pleg. 38 mm/eje 6,0 mm/7º
1 x	Tuerca autoempotrable M6 (4 pcs)
1 x	Cono Alumin. hélice pleg. 30 mm diámetro / eje 5,0 mm

17,691.73EUR